Sürdürülebilir Kalkınma Amaçları
Yazarlar
- Dertli, Enes(115)
- Kaya, Yunus(50)
- Ayata, Ümit(48)
- Şahin, Engin(48)
- İspirli, Hümeyra(46)
- Bayraktar, Bülent(42)
- Şenay, Volkan(41)
- Can, Zehra(39)
- Özen, Soner(37)
- Bayram, Sinan(35)
- Pat, Suat(35)
- Öztürk, Mesut(35)
- Ecem Bayram, Nesrin(34)
- Esmer, Yusuf(34)
- Battal, Fetullah(33)
- Artar, Musa(32)
- Öner, Erdal(32)
- Korkmaz, Şadan(31)
- Yilmaz, Mustafa Tahsin(31)
- Ertugrul, Mehmet(30)
- Mercan, Emin(30)
- Hasar, Ugur Cem(29)
- Kutlu, Naciye(28)
- Özdemir, Akın(27)
- Kul, Murat(26)
- Cuce, Erdem(25)
- Kamiloğlu, Aybike(25)
- Bayram, Ozkan(24)
- Sefali, Abdurrahman(24)
- Sert, Durmuş(24)
- Çolak, Murat(24)
- Ayazoglu, Rabil(22)
- Gıdık, Betül(22)
- Maden, Sedat(22)
- Ustabulut, Mete Yusuf(22)
- Uçurum, Metin(22)
- Akeren, Zahide(21)
- Dirican, Ebubekir(21)
- Kara, Yakup(21)
- Abdioglu, Murat(20)
Yayınlar
- MakaleYalnız künye2021Scopus SJRQ4Effects of Bifidobacterium animalis and inulin addition on quality characteristics of synbiotic milk chocolate
Akgül, Ayse; Sert, Durmus; Mercan, Emin
The aim of this study was to investigate effects of addition of B. animalis BB-12 (before tempering, BT or after tempering, AT) and inulin (6, 8, and 10%) on thermal, physicochemical characteristics, fatty acid composition, textural properties and probiotic viability of milk chocolates during 60 days of storage. The free fatty acid (FFA) value of milk chocolates ranged from 0.66 to 0.89 (% oleic acid), in which higher ratio of inulin addition increased the FFA. Probiotics and inulin addition increased darkness of chocolates when compared to control. D[4,3] value of samples ranged from 9.26-17.97 mu m. Higher inulin ratio in chocolates increased viscosity and yield value. These values in the group BT were higher than those of the group AT. BB-12 count of probiotic and synbiotic samples ranged from 7.09-8.06 log cfu/g during the storage. Higher inulin ratio increased the probiotics count in samples. Probiotic addition after tempering increased the count of probiotic and improved viability at the end of storage. The results showed that B. animalis BB-12 is capable of surviving in milk chocolate, at an appropriate bacteria count (>107 cfu/g), up to 60 days of storage at 18 degrees C.
AtıfWoS2
İncele - MakaleYalnız künye2021Effect of testicular morphology on embryo development to the blastocyst stage after round spermatid injection
Ozmerdiven, Gokhun; Guler, Yavuz; Sahin, Eren; Tatar, Zeynep; Erbin, Akif; Dirican, Ebubekir; Haliloglu, Ahmet Hakan
If spermatozoa cannot be found after testiculer sperm extraction (TESE) in patients followed up due to nonobstructive azospermia (NOA) and the patients do not want donor spermatozoa, performance of round spermatid injection (ROSI) with the current technology seems to be the last resort. This retrospective study was conducted to evaluate the effect of testicular morphology on the development of embryos to the blastocyst stage obtained from ROSI. Between September 2019 and March 2020, after TESE and biopsy 29 patients who had only spermatid were taken to study. Tubular appearance, basal membrane appearance, Johnson score, peritubular fibrosis, interstitial fibrosis, and Leydig cell proliferation were pathologically examined. Following egg collection, ROSI was applied to the oocytes using the piezoelectric method. The embryos were monitored until the blastocyst stage. The mean age of the 29 patients was 36.3+5.01 years. Also, 7 patients had not previously undergone TESE, 20 had previously undergone once, and 2 had previously undergone twice. It was observed that having a history of TESE and a high Johnson score increased the likelihood of the embryo remaining in the blastocyst stage (P=0.021 and 0.014, respectively). However, other parameters do not affect the likelihood of blastocyst formation (P>0.05). Low TESE history and high Johnson score were associated with embryo development to the blastocyst stage. If spermatozoa are not found in patients with nonobstructive azoospermia, ROSI performed during initial TESE increases the likelihood of blastocyst formation.
AtıfWoS1İncele - MakaleYalnız künye2021BIOCHEMICAL AND BIOACTIVE CONTENT IN FRUITS OF WALNUT (JUGLANS REGIA L.) GENOTYPES FROM TURKEY
Erdogan, Ummugulsum; Argin, Sanem; Turan, Metin; Cakmakci, Ramazan; Olgun, Murat
Walnuts (Juglans regia L.) are a good source of dietary minerals and contain significant amounts of potassium, phosphorus, magnesium and iron. In Turkey, walnut orchards are found in the coruh Valley and are generally composed of local varieties. Since chemical and physical properties of walnuts are very important in determining their quality, in this study, nut and kernel characteristics, fatty acid composition and phenolic composition were determined for 26 walnut genotypes collected from the valley. Total fat content was found to be between 53.75% and 71.43%, while the crude protein amount ranged from 10.21% to 20.71%. Total carbohydrates were calculated between 14.31-27.52% and ash content was found to be between 1.64% and 3.32%. The oleic acid content and linoleic acid content ranged from 18.34 to 25.58% and 37.09% to 87.51%, respectively. The linolenic acid content was determined between 5.52% and 11.03%. Our study showed that, differences in phenolic component, crude protein and fatty acid content of walnuts were caused by different growing conditions. Genotypes have a rich and stable structure in terms of fruit quality parameters, minerals, organic acids, phenolic composition, antioxidant and fatty acids amounts and amino acids. In other words, these characteristics did not show much variation in genotypes grown in the Valley. However, there was a great variation in hormone levels among genotypes. In terms of the parameters examined, GN2, GNI, ((NIS, GN24, GN25 and GN26 genotypes were determined as rich and stable genotypes.
AtıfWoS8İncele - MakaleAçık Erişim2021Scopus SJRQ1Measurement of Propagation Characteristics of Nonreciprocal Networks/Lines Using a Line-Line Method
Hasar, Ugur C.; Kaya, Yunus; Ertugrul, Mehmet
In this article have proposed a new calibration-free line-line method for propagation constant (gamma) determination of homogeneous nonreciprocal networks or lines with symmetric reflection property. To achieve our goal, wave-cascading matrices for impedance, amplitude, and phase changes for a line step from a homogeneous reciprocal network or line to a homogeneous nonreciprocal network or line (and vice versa). Two different approaches based on the proposed line-line method are proposed for unique extraction of gamma in forward and backward directions. Measurements of gamma for two reciprocal lines (waveguide straights at X-band and Ku-band with different lengths) and a nonreciprocal line (microwave phase shifter) were first carried out and then compared with measured gamma of these lines by different methods to validate our method and monitor its accuracy.
AtıfWoS4OpenAlex5İncele - MakaleYalnız künye2021Scopus SJRQ1Enhancing Burnability Characteristics of Low-Temperature Burnt-Cement Clinker by Recycling Phosphogypsum Wastes
Aksan, U.; Köseoglu, K.; Gökçe, H. S.
In the present study, the effect of phosphogypsum, a byproduct from the phosphoric acid production industry, on the clinkerization process was researched in order to improve the burnability of clinkers at lower burning temperatures. Raw meal samples containing phosphogypsum at 0%, 1%, 3%, and 5% by weight were burned at 1,350 degrees C, 1,400 degrees C, 1,450 degrees C, and 1,500 degrees C. The introduction of phosphogypsum reduced the presence of unbounded (free) CaO relatively up to 43%. Thus, the mineralization effect of phosphogypsum promotes lower burning temperatures. The free CaO content of the 5% phosphogypsum containing clinker decreased to 0.94% at 1,400 degrees C after 120 min of burning time. The free CaO content was found to be almost identical (0.75%) to that of industrial clinker burned in a rotary kiln at 1,500 degrees C. Due to the low free CaO content (<1%) and the burnability index (73), the recycling of phosphogypsum wastes was found to be suitable for the production of eco-efficient clinkers. The reduced energy consumption and energy-related CO2 emissions in such modified clinkers can contribute to the economic and ecological goals of the cement industry. (C) 2021 American Society of Civil Engineers.
AtıfWoS2OpenAlex3İncele - MakaleYalnız künye2021Scopus SJRQ3Biocatalytic asymmetric synthesis of (R)-1-tetralol using Lactobacillus paracasei BD101
Kalay, Erbay; Şahin, Engin
Asymmetric bioreduction of ketones is a fundamental process in the production of organic molecules. Compounds containing tetralone rings are found in the structure of many biologically active and pharmaceutical molecules. Biocatalytic reduction of ketones is one of the most promising and significant routes to prepare optically active alcohols. In this study, the reductive capacity of Lactobacillus paracasei BD101 was investigated as whole-cell biocatalyst in the enantioselective reduction of 1-tetralone (1). In biocatalytic reduction reactions, the conversion of the substrate and the enantiomeric excess (ee) of the product are significantly affected by optimization parameters such as temperature, agitation rate, pH, and incubation time. Effects of these parameters on ee and conversion were investigated comprehensively. (R)-1-tetralol ((R)-2), which can be used to treat disorder such as obsessive compulsive, post-traumatic stress, premenstrual dysphoric, and social anxiety, was manufactured in enantiopure form, high yield and gram-scale, using whole-cell biocatalysts of L. paracasei BD101. The 7.04 g of (R)-2 was obtained in optically pure form with 95% yield. Also, to our knowledge, this is the first report on production of (R)-2 using whole-cell biocatalyst in excellent yield, conversion, enantiopure form and gram scale. This is a clean, eco-friendly and cheap method for the synthesis of (R)-2 compared with chemical catalyst.
AtıfScopus23WoS23OpenAlex24
İncele - MakaleAçık Erişim2021Scopus SJRQ3Honey: Determination of volatile compounds, antioxidant and antibacterial activities
Karlidag, Semiramis; Keskin, Merve; Bayram, Sinan; Mayda, Nazlı; Ozkok, Aslı
Honey is an important functional food for human health and nutrition that is collected by honey bees and stored in the honeycombs. In this study, total phenolic content, antioxidant activity and volatile compounds of 13 different honey samples collected from various districts of Malatya province were investigated. As a result of this study, it was determined that the total phenolic content varied between 8.50 mg GAE 100 g–1 and 73.90 mg GAE 100 g–1 and it was observed that the honey samples were rich in aldehydes, aliphatic acid and esters, alcohols, hydrocarbons, carboxylic acid esters, ketones, terpenes, fatty acids and esters. In addition, the antibacterial effects of honey samples were determined against 18 different pathogenic bacteria using agar well diffusion (AWD) method, minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). In AWD assay, it was recorded that inhibition zone diameters varied between 9 mm and 14 mm and honey samples were found to have a partial inhibitory effect against selected target pathogens.
AtıfScopus5WoS3OpenAlex7İncele - MakaleAçık Erişim2021Scopus SJRQ3Morgan-Voyce polynomial approach for quaternionic space curves of constant width
Aydin, Tuba Ağirman; Ayazoğlu, Rabil; Kocayiğit, Hüseyin
The curves of constant width are special curves used in engineering, architecture and technology. In the literature, these curves are considered according to different roofs in different spaces and some integral characterizations of these curves are obtained. However, in order to examine the geometric properties of curves of constant width, more than characterization is required. In this study, firstly differential equations characterizing quaternionic space curves of constant width are obtained. Then, the approximate solutions of the differential equations obtained are calculated by the Morgan-Voyce polynomial approach. The geometric properties of this curve type are examined with the help of these solutions.
AtıfScopus1WoS2OpenAlex1İncele - MakaleAçık Erişim2021Scopus SJRQ1Simple and accurate electromagnetic characterization of omega-class bianisotropic metamaterials using the state transition matrix method
Hasar, Ugur C.; Ozturk, Gokhan; Kaya, Yunus; Barroso, Joaquim J.; Ertugrul, Mehmet
We propose a simple and accurate microwave extraction procedure for full electromagnetic characterization of \Omega -class bianisotropic metamaterial (MM) slabs from normal incidence scattering (S-) parameters using TE1, TE2, and TE3 modes. Its closed-form nature (no need for any numerical analysis and optimization toolbox) and less requirement (a total of seven S-parameters) demonstrate the advantage of our method over other methods in the literature. Our approach was validated and its accuracy was verified by S-parameters, through a full electromagnetic simulation program - CST Microwave Studio, of an edge-coupled \Omega -class split-ring-resonator MM slab.
AtıfScopus15WoS13OpenAlex14İncele - MakaleAçık Erişim2021Scopus SJRQ3Does compliance with the preventive health behaviours against COVID-19 mitigate the effects of depression, anxiety and stress? (¿Cumplir con los comportamientos preventivos de salud contra el COVID-19 reduce los efectos de la depresión, la ansiedad y el estrés?)
Aydin, Fatih; Kaya, Feridun
In the present study, the aim was to investigate the associations between compliance with preventive health behaviours, depression, anxiety and stress. 478 adults living in Turkey voluntarily filled out the online survey, which comprised demographic questions, Measure of Compliance with Preventive Health Behaviours against COVID-19, and Depression Anxiety Stress Scales, between 24–31 March 2020: during the initial phase of the COVID-19 pandemic in Turkey. Results revealed that compliance with preventive health behaviours has negative associations with depression, anxiety and stress. Adults’ compliance with the recommended preventive health behaviours accounted for 14% variance in depression, 9% variance in anxiety and 10% variance in stress. The evidence might indicate that compliance with preventive health behaviours may protect people psychologically against the burden created by the novel COVID-19 pandemic.
AtıfScopus6WoS7OpenAlex6İncele - MakaleAçık Erişim2021Scopus SJRQ2Modeling and solving assembly line worker assignment and balancing problem with sequence-dependent setup times
Yilmaz, Hamid
Assembly lines appear with various differentiations in order to better include the disabled in the labor market and to increase production efficiency. In this way, the optimal workforce assignment problem that emerges heterogeneously is called assembly line worker assignment and balancing problem (ALWABP). This paper addresses the ALWABP where the simple version is enriched by considering sequence-dependent setup times between tasks. A mixed integer linear programming model is presented, and a simulated annealing algorithm is developed such as an NP-hard problem. In order to test the proposed solutions, 640 benchmark problems in the literature were combined and used. The solutions obtained through using the proposed algorithm are compared with the mixed integer programming model on the small-size test problems. Experimental results show that the proposed algorithm is more effective and robust for a large set of benchmark problems.
AtıfScopus14WoS12OpenAlex16İncele - MakaleAçık Erişim2021Scopus SJRQ2Adipokine, gut and thyroid hormone responses to probiotic application in chukar partridges (Alectoris chukar) exposed to heat stress
Bayraktar, Bülent; Tekce, Emre; Kaya, Hacer; Gürbüz, Ahmet Burak; Dirican, Ebubekir; Korkmaz, Serol; Atalay, Banu; Ülker, Ufuk
The aim of this study was to investigate the effect of Lactobacillus reuteri E81 (LRE) probiotic supplementation on heat stress responses in chukar partridges (Alectoris chukar). The birds were divided into two groups, one of which was exposed to heat stress (HS). Within each group, four subgroups, each including 64 birds, were created for the three treatment doses (200, 400 or 600 mg/kg) of LRE and the control. The experiment was started with day-old birds, kept at a temperature of 25 8C or 37 8C. After a 7-day adjustment period, the LRE supplementation lasted for 35 days. The levels of different adipokines, including visfatin (VF), adiponectin (ADP), chemerin (CHEM), as well as the concentration of plasma citrulline (CIT) and the levels of thyroid hormones (T3 and T4) and thyroid-stimulating hormone (TSH) in the blood were measured at 21 and 42 days of age. A significant correlation (P < 0.01) was found between LRE supplementation and the decrease in serum VF, ADP, CIT, T3 and T4 levels in partridges exposed to HS. On the other hand, no significant relationship was found between LRE supplementation and the serum CHEM and TSH levels (P > 0.05). We concluded that the addition of 600 mg/kg LRE is beneficial in preventing intestinal damage and inflammation provoked by HS.
AtıfScopus13WoS14OpenAlex16İncele - MakaleAçık Erişim2021Scopus SJRQ2An Experimental and Numerical Determination on Low-Velocity Impact Response of Hybrid Composite Laminate
Erbayrak, Engin; Yuncuoglu, Ercument Ugur; Kahraman, Yusuf; Gumus, Beril Eker
In this study, experimental and numerical investigations were carried out in order to determine the mechanical properties and impact response of hybrid composite laminate. The hybrid composite laminate was formed from plain woven carbon fiber reinforced epoxy (CFRE) and plain woven glass fiber reinforced epoxy (GFRE) fiber using VARTM (vacuum-assisted resin transfer molding) process. The mechanical properties of the hybrid composites were determined using tensile test device with a 1 mm/min loading rate at room temperature. In addition, hybrid composites were subjected to low-velocity impact test under different impact energy levels (10, 20, 30, 40 J) for determining the impact response. Moreover, mechanical properties and impact responses of CFRE and GFRE laminates were also determined to compare to those of hybrid composite (HCGFRE). Microstructure analysis was performed to investigate the damage surfaces of the fiber and matrix in the composite material subjected to impact and tensile forces. In numerical analyses, composite damage model (Mat 54) was utilized in LS-DYNA® explicit finite element program to simulate the impact behavior of CFRE, GFRE and HCGFRE laminates. Consequently, the tensile test results showed that hybrid composite laminate behaved more ductile than carbon composite laminate and it exhibited more brittle behavior than glass composite laminate. Also, it was determined that absorbed energy and impact load capacity of HCGFRE composite laminate are between absorbed energy and impact load capacity of CFRE and GFRE composite laminate. It was determined that numerical results indicate a similar tendency with the experimental results.
AtıfScopus12WoS13OpenAlex14İncele - MakaleYalnız künye2021Scopus SJRQ1The Online Learning Experience of Theology Students in Turkey during the COVID-19 Pandemic: A New Disposition for RE?
Selçuk, Mualla; Sözen, Hasan; Şimşek, Vahdeddin; İpek, Yasemin
Through a quantitative research model, this study aims to understand the general attitudes of theology students in Turkey regarding online learning during the COVID-19 pandemic. In examining the determinant factors on their attitudes, research findings include: previous online education experience, the frequency of participating in synchronous courses, the qualifications of the instructor, the assessment and evaluation procedures, the orientation training programs and the infrastructure opportunities of the universities. Interpreting these factors enables the authors of this article to suggest a conversational relationship between RE and Islamic sciences with some shared objectives that leads to naming guiding principles in a manner that significantly supports students’ vocational journey.
AtıfScopus5WoS5OpenAlex19İncele - MakaleYalnız künye2021Scopus SJRQ1Development of gelatine-based edible film by addition of whey powders with different demineralisation ratios: Physicochemical, thermal, mechanical and microstructural characteristics
Sert, Durmuş; Üçok, Gamze; Kara, Ümmügülsüm; Mercan, E.M.İ.N.
The effects of using whey powders with different demineralisation rates on the physicochemical, thermal, mechanical, and microstructural properties of gelatine-based edible films were investigated. Films were produced from film-forming solutions (FFS) containing whey powder (WP) and 50, 70 and 90% demineralised whey powder (50DWP, 70DWP, 90DWP). The addition of whey powders increased the pH and particle size values of FFS. The zeta potential decreased significantly in the WP sample and gradually reduced depending on the demineralisation rate in the DWP samples. The addition of whey powders partially increased the density of the films. WP addition reduced the hydrophobicity of the film, while the addition of DWPs did not cause any change. The addition of whey powders decreased the L* and a* values of the films while increasing the b* values. Control was the most transparent, while 70DWP and 90DWP films had higher opacity. WP films had the most uniform and smooth surface. The highest degradation temperature (269.64 °C) was observed in the control sample. The weight loss of the control was 95%, whereas those of WP and DWP samples were 88–89%. WP addition reduced the tensile strength and increased the elasticity of the films.
AtıfScopus12WoS10OpenAlex12İncele - MakaleAçık Erişim2021Scopus SJRQ2Photoluminescence and structural properties of zirconium dioxide thin films produced by RF sputtering technique
Bakacak, Pinar K.; Gur, Emre; Bayram, Ozkan; Tuzemen, Sebahattin; Simsek, Onder
In this study, Zirconium Oxide (ZrO2) thin films were produced by using radio frequency magnetron sputtering method on glass substrate at various pressures. The effects of growth pressure on the characteristics of grown Zirconia nanostructures were investigated by Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), Uv-Visible Spectroscopy and Photoluminescence Spectrometry (PL). XRD analysis showed that peaks of the monoclinic and tetragonal phases were more effective at low growth pressure, but different monoclinic phase peaks were present at increasing growth pressures. The surface morphological properties of the films such as average and maximum roughness, changed significantly with increasing growth pressure, and the maximum peak height first increased to 40 nm and then decreased to 20 nm. The optical transmittance of these thin films was examined in the 450–1100 nm wavelength range, covering both the visible and near-infrared spectral range, and it was found to be approximately 95% at 550 nm wavelength, and the optical band gaps were calculated to be approximately 3.26 eV by PL analyses. Uv-Visible spectroscopy analysis showed that the refractive index of the Zirconia films decreases from 2.09 to 1.79 with increasing wavelength of the incident photon. ZrO2 thin films are considered potential materials for transparent electronic devices because of their high transmittance value.
AtıfScopus5WoS4OpenAlex5İncele - MakaleAçık Erişim2021Scopus SJRQ1Antioxidant, antimicrobial activities and fatty acid compositions of wild berberis spp. by different techniques combined with chemometrics (PCA and HCA)
Gıdık, Betül
Interest in medicinal plants and fruits has increased in recent years due to people beginning to consume natural foods. This study aims to investigate the total phenolic flavonoid content, antiox-idant activity, condensed tannin content, oil content, and fatty acid compositions of five local breeds of Berberis spp. from Bayburt, Turkey, and their antioxidant and antimicrobial activities. The fatty acid composition of samples was performed with gas chromatography-mass spectrometry (GC-MS), and the total fatty acid content of samples was between 6.12% and 8.60%. The main fatty acids in Berberis spp. samples were α-linolenic acid (32.85–37.88%) and linoleic acid (30.98–34.28%) followed by oleic acid (12.85–19.56%). Two antioxidant assays produced similar results, demonstrating that extracts of wild B. vulgaris L. had the highest ferric reducing antioxidant power (FRAP) (621.02 µmol FeSO4.7H2O/g) and 1,1-diphenyl-2-picrylhydrazyl radical (DPPH) (0.10 SC50 mg/mL) values. According to principal component analysis (PCA), four components were determined. In addition, two main groups were determined according to hierarchical cluster analysis (HCA), and wild and culture of B. vulgaris L. were in different subgroups. This is the first original report about the fatty acid composition and oil content of Berberis spp. grown in Bayburt, Turkey. The obtained results indicate that B. integerrima Bunge and B. vulgaris, which have especially remarkable fatty acid content, antioxidant, and antimicrobial activity, could be potential sources for these properties in different areas of use.
AtıfScopus45WoS41OpenAlex48İncele - MakaleAçık Erişim2021Scopus SJRQ1Investigation of time-history response of a historical masonry minaret under seismic loads
Yurdakul, Muhammet; Yılmaz, Fatih; Artar, Musa; Can, Ömer; Öner, Erdal; Daloğlu, Ayşe T.
This study presents an investigation of the seismic performance of a historical masonry minaret which was built in the 12th century in Bayburt. The minaret was built as masonry with regional stones and handmade bricks. The most important feature of the minaret is its longitudinally conical geometry. An experimental investigation was made to obtain the mechanical properties of the regional stone used in the historical minaret. A three-dimensional Finite Element Model of the historical minaret was created in SAP2000. Three earthquake ground motions such as Erzincan, Kocaeli-Duzce, and Van-Ercis were used to investigate the seismic performance of the historical minaret. The results show that Erzincan, Kocaeli-Duzce and Van-Ercis earthquakes may cause some damages in the same zone of the minaret body since the tensile stresses occurred due to the earthquakes exceed the limit tensile stress of the masonry brick. The use of the data obtained from the experimental investigation of the Bayburt yellow stone in the analysis is important for the reliability of the results.
AtıfScopus44WoS43OpenAlex44İncele - MakaleAçık Erişim2021Scopus SJRQ1Development of buffalo milk ice-cream by high pressure-homogenisation of mix: Physicochemical, textural and microstructural characterisation
Sert, Durmuş; Mercan, Emin; Kılınç, Mehmet
This study aimed to determine the physicochemical, textural, and microstructural characteristics of buffalo milk ice cream produced from high-pressure homogenisation (HPH) treated ice cream mix. Ice cream mix was subjected to 0 (control), 30, 60, 90, 120, or 150 MPa. HPH increased the firmness and consistency value of mixes, whereas it decreased cohesiveness and index of viscosity values. Also, HPH improved the lightness, redness, and yellowness of the mix. The mean particle size of HPH-treated mix samples was lower than the control, except HPH-150. The hardness of ice cream samples was between 14.30 and 77.81 N, in which HPH increased hardness value with the increasing pressure. The overrun of ice cream samples ranged from 19.93 to 45.15%, and HPH decreased it. HPH significantly improved resistance to melting in the ice cream. Scanning electron microscopy images revealed that HPH reduced the size of air bubbles. HPH at 150 MPa resulted in a foamy structure in the ice cream. HPH can alter the hardness, microstructure, and melting characteristics of buffalo milk ice cream. Products with improved properties may be developed by further modifying the formulation and processing parameters.
AtıfScopus22WoS16OpenAlex20İncele - MakaleAçık Erişim2021Scopus SJRQ1Investigation of mechanical properties of high-performance hybrid fiber concretes adding nanomaterials using with coarse aggregate
Öksüzer, Nurullah; Anil, Özgür; Aldemir, Alper; Şahmaran, Mustafa
High-performance hybrid fiber cement composites have more ductility and higher strength than traditional concrete. This is because crack development is limited due to multiple small cracks are formed instead of a single large crack as the fibers enter the matrix. It is customary to produce these concrete composites with fine aggregates. In this study, concrete composites with coarse aggregates were strived to be produced to gain some feasibility. To this end, different mixtures composed of different aggregate/binder ratios and different fly ash/binder ratios were designed. In order to compare the effectiveness of the combination of different fibers were utilized in these mixtures. The volumetric ratios of fibers (excluding reference samples) were kept constant at a value of 2%. For each mixture, four-point bending and compressive tests were performed. The increase in the aggregate ratio was observed to cause a more ductile flexural behavior in mixtures composed of PVA and steel fibers. In contrast, the ductility was reduced in mixtures with Nylon-mono and steel fibers. In addition, the ductility values were enhanced with the increase in FA/PC ratio. In addition, the possibility to use the cheaper Nylon-mono fibers in hybrid fiber mixtures was proved with optimization of aggregate-binder (A/B) and FA/PC ratios, enabling more feasible high-performance concrete mixtures.
AtıfScopus12WoS9OpenAlex13İncele