Sürdürülebilir Kalkınma Amaçları
Yayınlar
- MakaleYalnız künye2025Scopus SJRQ3Biosynthesis of alternan-stabilized selenium nanoparticles: A study on characterization and applications for antibacterial and antifungal purposes
ElObeid, Tahra; Yilmaz, Mustafa Tahsin; Ispirli, Humeyra; Sagdic, Osman; Taylan, Osman; Basahel, Abdulrahman; Karaboga, Dervis; Durak, Muhammed Zeki; Dertli, Enes
In this study, the alternan/selenium nanoparticles (Alt/SeNPs) were characterized with respect to their formation, morphology, size, selenium distribution, molecular, crystallographic, and thermal properties using UV–Vis spectroscopy, SEM, TEM, EDAX, FTIR, XRD, DSC and TGA measurements. UV–VIS measurements confirmed the synthesis of nanoparticles by observing a maximum surface plasmon resonance peak at 212 nm. In this study, alternan contributed to stabilizing the dispersion of SeNPs, resulting in a cluster of spherical and well-dispersed nanoparticles ranging in size from 50 to 90 nanometers. Nanoparticles were found to be highly thermally stable and in a nanocrystalline structure. The ABTS and CUPRAC radical scavenging activities of Alt/SeNPs were remarkable (95% and 78% at 4 and 6 mg/mL levels of Alt/SeNPs, respectively). Alt/SeNPs had also good inhibitory activities (3.5–4.0 and 4–15 mm of inhibition zone levels at 5 mg/mL level of Alt/against foodborne pathogenic bacteria and fungi, respectively).
AtıfScopus1WoS2OpenAlex2
İncele - MakaleAçık Erişim2025Scopus SJRQ2Liquorilactobacillus hordei SK6 and Liquorilactobacillus mali SK26 from Traditional Water Kefir Produce Dextrans with Technological Roles
Edis, Kader Korkmaz; İspirli, Hümeyra; Yilmaz, Mustafa Tahsin; Dertli, Enes
The significance of exopolysaccharides (EPS) in various applications has garnered increasing attention. In this study, two bacteria, Liquorilactobacillus hordei SK6 and Liquorilactobacillus mali SK26, isolated from traditional water kefir grains, produced 8.89 g/L and 7.2 g/L of homopolymeric glucan, respectively. NMR analysis revealed that both glucans were dextrans composed of (1 → 6)-linked α-d-glucose units, with (1 → 3)-linked α-d-glucose units serving as branching points, accounting for 5.3 ± 0.2% in dextran SK6 and 2.7 ± 0.15% in SK26. FTIR and XRD analyses further confirmed the amorphous nature of the dextrans, although dextran SK6 exhibited micro-arranged structures. Thermal characterization using TGA and DSC showed degradation temperatures of 298.5 °C for dextran SK6 and 282.1 °C for dextran SK26. Clear differences in morphological properties were observed using AFM and SEM. These findings provide valuable insights into dextran-producing strains and their potential applications in various industries.
AtıfScopus3WoS2OpenAlex4
İncele - MakaleYalnız künye2024Scopus SJRQ3Facile biomimetic synthesis of AgNPs using aqueous extract of Helichrysum arenarium: characterization and antimicrobial activity
Yilmaz, Mustafa Tahsin; İspirli, Humeyra; Taylan, Osman; Balubaid, Mohammad; Dertli, Enes
The present study focuses on synthesis of silver nanoparticles (AgNPs) by employment of a green and facile synthesis method. Aqueous extract of Helichrysum arenarium was used as a reducing and capping agent. The bioreduction of silver particles was monitored using UV–Vis spectroscopy based on increase in color intensity led by surface plasmon resonance. SEM, TEM, FTIR, DSC, and XRD analyses were followed for characterization, divulging that the nanoparticles were thermally resistant in the size of approximately 20 nm with a quasi-spherical shape without any agglomeration. AgNPs possessed a nanocrystal form with presence of crystalline Ag. EDAX analysis was used to verify that the nanoparticles were silver as revealed by a typical optical absorption peak of metallic silver nanocrystallites. The AgNPs were shown to have strong antibacterial and antifungal effects on some foodborne pathogens. The method developed in this study could offer a green, facile biomimetic, and cost-effective method.
AtıfScopus3WoS2OpenAlex3İncele - MakaleAçık Erişim2023Scopus SJRQ1Structural characterization of potato starch modified by a 4,6-α-glucanotransferase B from Lactobacillus reuteri E81
Hassanein, Wael S.; İspirli, Hümeyra; Dertli, Enes; Yilmaz, Mustafa Tahsin
The recent reports have revealed that increase in amount of α-1,6 linkages by modification of potato starch with enzyme (glycosyltransferases) treatment gains slowly digestible properties to the starch; however, the formation of new α-1,6-glycosidic linkages diminish the thermal resistance of the starch granules. In this study, a putative GtfB-E81, (a 4,6-α-glucanotransferase-4,6-αGT) from L. reuteri E81 was firstly used to produce a short length of α-1,6 linkages. NMR results revealed that external short chains mostly comprised of 1–6 glucosyl units were newly produced in potato starch, and the α-1,6 linkage ratio was significantly increased from 2.9 % to 36.8 %, suggesting that this novel GtfB-E81 might have potentially an efficient transferase activity. In our study, native and GtfB-E81 modified starches showed fundamental similarities with respect to their molecular properties and treatment of native potato starch with GtfB-E81 did not remarkably change thermal stability of the potato starch, which seems to be very prominent for the food industry given the significantly decreased thermal stability results obtained for the enzyme modified starches reported in the literature. Therefore, the results of this study should open up emerging perspectives for regulating slowly digestible characteristics of potato starch in future studies without a significant change in the molecular, thermal, and crystallographic properties.
AtıfScopus14WoS14OpenAlex18İncele - MakaleYalnız künye2022Scopus SJRQ1Bioactive and technological properties of an α-D-glucan synthesized by Weissella cibaria PDER21
Yilmaz, Mustafa Tahsin; Ispirli, Humeyra; Taylan, Osman; Alamoudi, Mohammed; Dertli, Enes
A slimy-mucinous-type colony of EPS-producing Weissella cibaria PDER21 was isolated and identified. The monomer composition was glucose, showing that the EPS is a glucan type homopolysaccharide, The core structure of (1 → 6)-linked α-D-glucose units including (1 → 3)-linked α-D-glucose branches at a ratio of 93.4/6.6 was revealed by 1H and 13C NMR spectra and confirmed by FTIR analysis. The glucan showed a superior thermal stability with almost no degradation in structure up to 300 °C. XRD analysis revealed the amorphous structure while SEM analysis confirmed the layer-like morphology. The glucan had an antioxidant activity (89.5%), water-holding capacity (103.7%) and water solubility index (80.7%) values, suggesting that the glucan had a strong level of antioxidant properties; good water binding capacity and excellent solubility. The glucan PDER21 is a polysaccharide possessing a good combination of technical and functional attributes, suggesting a great deal of potential for use in the food industry.
AtıfScopus42WoS41OpenAlex40İncele - MakaleYalnız künye2022Scopus SJRQ1Characterisation and functional roles of a highly branched dextran produced by a bee pollen isolate Leuconostoc mesenteroides BI-20
Yilmaz, Mustafa Tahsin; İspirli, Hümeyra; Taylan, Osman; Taşdemir, Volkan; Sagdic, Osman; Dertli, Enes
Lactic Acid Bacteria (LAB) from different niches can be responsible for the production of distinct exopolysaccharides (EPS) that might possess important structural and technological features. In this respect, the aim of this study was to isolate an EPS producer LAB strain from bee pollen environment. Leuconostoc mesenteroides BI-20 with a slimy-mucoid colony morphology was identified from bee pollen and the structural, technological and functional characteristics of EPS produced by this strain were determined. EPS BI-20 was a highly branched dextran containing 20% (1 → 3)-linked α-D-glucose branches determined by 1H and 13C NMR analysis. The presence of (1 → 6)/(1 → 3)-linked α-D-glucose linkages in dextran BI-20 was also confirmed by FTIR analysis. Dextran BI-20, with a molecular weight of 1 × 108 Da, possessed strong thermal properties, amorphous nature and highly branched and fibrous microstructural characteristics determined by DSC, TGA, XRD and SEM analysis, respectively. In terms of functional roles, dextran BI-20 demonstrated strong antioxidant capacity detected by ABTS and CUPRAC tests. Finally, no digestion was observed in dextran BI-20 under simulated gastric conditions. Results of this study unveiled techno-functional characteristics of dextran BI-20 produced by a bee pollen isolate LAB strain.
AtıfScopus39WoS36OpenAlex39İncele - MakaleYalnız künye2022Scopus SJRQ1Structural and bioactive characteristics of a dextran produced by Lactobacillus kunkeei AK1
Yilmaz, Mustafa Tahsin; İspirli, Hümeyra; Taylan, Osman; Bilgrami, Anwar L.; Dertli, Enes
In this study, structural and techno-functional characteristics of an exopolysaccharide (EPS) produced by Lactobacillus kunkeei AK1 were determined. High-performance liquid chromatography (HPLC) analysis demonstrated that EPS AK1 was composed of only glucose units. 1H and 13C Nuclear magnetic resonance (NMR) analysis revealed that EPS AK1 was a dextran type EPS containing 4.78% (1 → 4)-linked α-D-glucose branches. The molecular weight of EPS AK1 was determined to be 45 kDa by Gel Permeation Chromatography (GPC) analysis. A high level of thermal stability up to 280 °C was determined for dextran AK1 detected by Differential scanning calorimetry (DSC) and Thermogravimetric analysis (TGA). Dextran AK1 appeared as regular spheres with compact morphology and as irregular particles in the solution with no clear cross-linking between the chains of the polysaccharide observed by Scanning electron microscopy (SEM) and Atomic force microscopy (AFM) analysis, respectively. X-ray diffraction analysis (XRD) analysis demonstrated that dextran AK1 had a crystalline structure. A relatively strong antioxidant activity was observed for dextran AK1 determined by 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2′-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) radical scavenging and cupric reducing antioxidant capacity (CUPRAC) tests. Finally, only a digestion ratio of 3.1% was observed for dextran AK1 following the in vitro simulated gastric digestion test.
AtıfScopus43WoS39OpenAlex41İncele - MakaleAçık Erişim2021Scopus SJRQ1A green nano-biosynthesis of selenium nanoparticles with Tarragon extract: Structural, thermal, and antimicrobial characterization
Yilmaz, Mustafa Tahsin; İspirli, Humeyra; Taylan, Osman; Dertli, Enes
In this study, tarragon extract was used as a reducing agent to perform green nano-biosynthesis of selenium nanoparticles (SeNPs). The synthesized SeNPs were characterized using measurements of UV–Vis spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy disperse analysis of X rays (EDAX), Fourier-transform infrared spectroscopy (FTIR), X-ray diffractometer (XRD) and differential scanning analysis (DSC). Synthesis of nanoparticles was confirmed by observing a peak at 212 nm in UV-VIS, indicating the surface plasmon resonance of SeNPs. Tarragon extract enabled a stable dispersion of SeNPs, giving rise to formation of the nanoparticles in the shape of quasi-spheres without clustering with the sizes between 20 and 50 nm. The SeNPs were shown to be in the form of nanocrystals, having Se embedded in the nanostructure with high thermal stability (a high resistance to thermal process over 200 °C). The SeNPs synthesized with tarragon extract could remarkably increase the inhibition zones from approximately 13 to 18 mm against the pathogenic bacteria and from 10 to 14 mm, 17–36 mm, 8–12 mm, 15–24.5 mm and 9–14 mm, against A. alternata, A. niger, A. parasiticus, B. cinerea, F. oxysporum and P. chrysogenum, respectively.
AtıfScopus86WoS71OpenAlex83İncele - MakaleYalnız künye2020Scopus SJRQ1Structural and physicochemical characterisation and antioxidant activity of an α-D-glucan produced by sourdough isolate Weissella cibaria MED17
Aburas, Hani; İspirli, Hümeyra; Taylan, Osman; Yilmaz, Mustafa Tahsin; Dertli, Enes
An exopolysaccharide (EPS) producer slimy-mucoid type colony was isolated from sourdough and identified as Weissella cibaria MED17. The 1H and 13C NMR spectra of EPS MED17 demonstrated that this EPS was a dextran type glucan ((1 → 6)-linked α-D-glucose core structure) containing (1 → 3)-linked α-D-glucose branches and proportion of (1 → 6)-linked α-D-glucose units to (1 → 3)-linked α-D-glucose units was 94.3:5.7%. The FTIR analysis also confirmed the (1 → 6)-linked α-D-glucose linkage. A high level of thermal stability was observed for glucan MED17 as no degradation up to 300 °C was observed by TGA and DSC analysis. The XRD analysis of glucan MED17 showed its semi- crystalline nature and its compact sheet-like morphology was observed by SEM analysis. Finally, antioxidant characteristics of glucan MED17 were determined by ABTS and DPPH radical scavenging activity tests that revealed a moderate antioxidant activity of glucan MED17. These findings show potential techno-functional characteristics of glucan MED17.
AtıfScopus58WoS55OpenAlex59İncele - MakaleAçık Erişim2020Scopus SJRQ2Optimization of cryoprotectant formulation to enhance the viability of Lactobacillus brevis ED25: Determination of storage stability and acidification kinetics in sourdough
Gul, Latife Betul; Gul, Osman; Yilmaz, Mustafa Tahsin; Dertli, Enes; Con, Ahmet Hilmi
In this study, various kinds of cryoprotectant (skim milk, lactose, and sucrose) formulations were tested to enhance the survival of Lactobacillus brevis ED25 after freezing and freeze-drying. A Box–Behnken experimental design was used to optimize cryoprotective medium and the highest cell survival was observed with the 17.28% skim milk, 2.12% lactose, and 10% sucrose cryoprotectant as the optimum condition. The structural and physicochemical characteristics of freeze-dried powder were acceptable for application with regards to particle surface morphology, moisture and water activity (Aw), glass transition temperature (Tg), Fourier transform infrared spectra, X-ray structure, and also storage stability under the refrigeration and room temperature conditions. Accelerated storage test based on Arrhenius equation could be used to predict the freeze-dried bacterial shelf life but only with a certain degree of predictability for long-term storage. The acidification kinetics of fresh and stored culture in sourdough fermentation was also described on the basis of the Gompertz equation. Practical applications: Freezing and storage are crucial factors for the viability and acidification power of starter culture. Therefore, various types and concentrations of cryoprotectants have been used to preserve the microorganisms. L. brevis ED25 has been a good potential for the manufacture of industrial sourdoughs and this research has aimed to investigate long-term protective effects of optimum cryoprotectant formulations on the viability of bacteria and also determine the acidification power in sourdough. The results showed the potential value of freeze-dried L. brevis ED25 culture for commercialization.
AtıfScopus26WoS18OpenAlex26İncele - MakaleAçık Erişim2020MACHINE LEARNING APPLICATION FOR OPTIMIZING ASYMMETRICAL REDUCTION OF ACETOPHENONE EMPLOYING COMPLETE CELL OF LACTOBACILLUS SENMAIZUKE AS AN ENVIRONMENTALLY FRIENDLY APPROACH
Taylan, Osman; Yilmaz, Mustafa Tahsin; Balubaid, Mohammed; Alamoudi, Rami; El-Obeid, Tahra; Dertli, Enes; Şahin, Engin; Bakhsh, Ahmed; Herrera-Viedma, Enrique
Recently, optimization of the bioreduction reactions by optimization methodologies has gained special interest as these reactions are affected by several extrinsic factors that should be optimized for higher yields. An important example for these kinds of reactions is the complete cell implications for the bioreduction of prochiral ketones in which the culture parameters play crucial roles. Such biocatalysts provide environmentally friendly and clean methodology to perform reactions under mild conditions with high conversion rates. In the present work, at the first step the Lactobacillus senmaizuke was isolated from sourdough and the complete cell application of Lactobacillus senmaizuke for the bioreduction of acetophenone was optimized by an Artificial Neural networks (ANNs) to achieve the highest enantiomeric excess (EE, %). The culture parameters, pH, temperature, incubation period and agitation speed were the experimental factors that were optimized to maximize EE (%) by machine learning algorithm of Artificial Intelligence modeling and the best conditions to maximize EE (95.5 %) were calculated to be pH of 5.7, temperature of 35 ºC, incubation period of 76 h and agitation speed of 240 rpm with very low sum of squared error value (0.611236 %) to bioreduce acetophenone using complete cell of Lactobacillus senmaizuke as a sourdough isolate GRAS microbial species. Accordingly, The ANN was employed to correctly establish the enantiomeric excess values of the specimen with an average absolute error 0.080739 %.
AtıfScopus3WoS2OpenAlex2İncele - MakaleAçık Erişim2020Optimization of exopolysaccharide production of Lactobacillus brevis E25 using RSM and characterization
Ermis, Ertan; Poyraz, Ecem; Dertli, Enes; Yilmaz, Mustafa Tahsin
Response surface methodology was used to determine the exopolysaccharide production of Lactobacillus brevis E25. The effects of three variables, temperature (30, 36 and 42 °C), incubation time (18, 33 and 48 h) and initial pH of growth medium (4.5, 5.5, and 6.5) were studied. Under optimum growth conditions, the amount of exopolysaccharide derived from Lactobacillus brevis E25 ranged from 10 to 35 gL-1. The size of EPS molecules ranged from 105 to 107 Da. Infra red spectrum analysis showed characteristics absorption peaks indicating the presence of-OH, C=O and C-H groups. Furthermore, only glucose was detected as monosaccharide in exopolysaccharide structure, revealing that the structure of exopolysaccharide is a homopolymeric glucan type. Based on the differential scanning calorimeter thermograms, exopolysaccharide’s melting temperature was observed around 116 °C.
AtıfScopus18OpenAlex18
İncele - MakaleAçık Erişim2020Scopus SJRQ1Synthesis and characterisation of alternan-stabilised silver nanoparticles and determination of their antibacterial and antifungal activities against foodborne pathogens and fungi
Yilmaz, Mustafa Tahsin; İspirli, Hümeyra; Taylan, Osman; Dertli, Enes
In this study, alternan isolated from Lactobacillus reuteri E81 was used as the stabilising agent to produce alternan-stabilised silver nanoparticles (AgNPs-Alt) and AgNPs-Alt were characterized and their antibacterial and antifungal activities were tested. The formation and the stability of AgNPs-Alt were determined by UV–vis spectroscopy analysis. SEM and TEM analysis revealed the uniform morphology of AgNPs-Alt with an average size of ~50 nm. The crystalline nature of the AgNPs-Alt was confirmed by XRD analysis. The interactions of alternan functional groups with silver was observed by FTIR analysis and thermal characteristics of AgNPs-Alt were determined by DSC analysis. Finally, the antibacterial and the antifungal activities of AgNPs-Alt were tested and AgNPs-Alt revealed inhibitory effects to pathogenic strains at 0.25 mg ml−1 concentration and this activity was observed to be concentration dependent. For the antifungal activity, a higher level of AgNPs-Alt was required compared to the antibacterial activity.
AtıfScopus35WoS31OpenAlex36İncele - MakaleAçık Erişim2020Scopus SJRQ1An integrated neural-fuzzy methodology for characterisation and modelling of exopolysaccharide (EPS) production levels of Leuconostoc mesenteroides DL1
Kabli, Mohammad; Yilmaz, Mustafa Tahsin; Taylan, Osman; Kaya, Yasemin; İspirli, Hümeyra; Basahel, Abdulrahman; Sagdic, Osman; Dertli, Enes
Optimisation of exopolysaccharides (EPS) production in Lactic Acid Bacteria (LAB) is an important task as EPS production can be affected by different parameters. In this respect, this study aimed to characterise the structure of an EPS from Leuconstoc mesenteroides DL1 strain and to optimise the EPS production by determination of the effects of incubation time, sucrose concentration, incubation temperature and initial levan concentration (input parameters) using integrated ANNs (Artificial neural networks) and fuzzy modelling approaches. The characterisation of the EPS monomeric composition by HPLC analysis revealed that EPS DL1 was composed of glucose and fructose. The 1H and 13C NMR spectra of EPS DL1 also confirmed the glucan and fructan production. The effects of the input parameters on glucan and fructan production levels as output parameters by DL1 were optimised using neural network and fuzzy modelling tools. The fuzzy model was developed based on the recognition of basic elements of input-output parameters, and the power of ANNs used for system identification. A structural analysis was carried out to improve the flexibility of fuzzy model, and to design the unknown mappings of the input and output parameters more robustly. The parameters then were fine-tuned by qualitative reasoning to establish the relations of input output parameters using membership functions (MFs) and their intervals determination. A hybrid training algorithm was employed for parameter identification, MFs and their interval determination to obtain the fuzzy model. The model can predict the outcome parameters; glucan and fructan with high accuracy for the predetermined input parameters.
AtıfScopus8WoS7OpenAlex9İncele - MakaleAçık Erişim2019Scopus SJRQ1Electrospraying method for fabrication of essential oil loaded-chitosan nanoparticle delivery systems characterized by molecular, thermal, morphological and antifungal properties
Yilmaz, Mustafa Tahsin; Yilmaz, Azime; Akman, Perihan Kubra; Bozkurt, Fatih; Dertli, Enes; Basahel, Abdulrahman; Al-Sasi, Basil; Taylan, Osman; Sagdic, Osman
Fabrication of essential oil loaded-chitosan nanoparticles using electrospraying technique appears to be a novel strategy to develop thermally stable nanoparticles possessing higher encapsulation efficiency and particle stability. This study aims to fabricate chitosan nanoparticles (CNPs) loaded with Origanum vulgare essential oil (OEO, Origanum vulgare L.) at different proportions (OEO/CH proportions of 0:1, 0.0625:1, 0.125:1, 0.25:1 and 0.5:1 mL/g) using electrospraying technique. The CNPs were characterized in term of their particle size and stability (dynamic light scattering), encapsulation efficiency (spectrophotometry), and molecular (Fourier transform infrared spectroscopy), thermal (differential scanning calorimetry/thermogravimetric analysis), morphological (scanning electron microscopy) and antifungal (agar dilution method) and fungistatic activity properties. The average particle sizes of the CNPs ranged between 290 and 483 nm with a spherical morphology. Positively charged surface characteristics were observed to increase with the increment of OEO concentration in CNPs. The encapsulation efficiency values were determined in the range of 70.1 and 79.6%. The molecular and thermal analyses exposed very decent encapsulation of OEO into thermally stable chitosan nanoparticles. Morphological analysis verified the spherical shapes of these nanoparticles. Above all, the antifungal effectiveness of OEO against the Alternaria alternata AY1 could be significantly (p < 0.05) increased by its encapsulation into chitosan nanoparticles fabricated by the electrospraying technique. Consequently, it can be stated that the electrospraying technique developed is able to fabricate thermally stable nanoparticles owning higher encapsulation efficiency and particle stability. The results and findings suggest that the electrospraying technique would be a promising method to fabricate chitosan-based nanoparticles as an antimicrobial agent to control their release in a prolonged preservative effect in cosmetic, pharmaceutical and food applications for adjustable dosage forms. Industrial relevance: The fungal agents such as Alternaria alternata cause great damages on post-harvest fresh fruits and vegetables, thus leading to a great economical lose. Therefore, a great variety of methods in struggling with disease have been previously proposed. Nowadays, the most effective leading methods to struggle against plant diseases are those applied with synthetic fungicides to minimize such lose in post-harvest fruit and vegetables. However, intensive and unconscious use of the fungicides leads the pathogens to develop resistance against these agents as well as to accumulation of chemical residues in soil, water and air and finally to formation of carcinogenic effects on human health. Nowadays, a great effort is being exerted to develop novel biodegradable and natural antimicrobial agents for struggling fungal spoilage in postharvest products. Essential oils are among the most widely used natural struggling methods. Essential oils obtained from plants have been extensively used since they are natural antimicrobial agents. However, they cannot be effectively used in spite of their extensive applications. Recently, some researches in the field of nanotechnology have demonstrated that the effectiveness of active substances could be increased by using some techniques. In this respect, we aimed at developing essential-oil-loaded-chitosan-nanoparticle delivery systems using an electrospraying deposition system to prevent fungal colonization on food and plant materials. By increasing antifungal effectiveness of essential oils by their encapsulation into nanoparticles, it will be possible to decrease the levels of regularly applied dose and reflect the obtained outcomes to the food and agriculture industry. This study is the first example of production of essential oil loaded nanoparticles using the electrospraying-hydrodynamic process and showed that encapsulation of oregano essential oil into chitosan based nanoparticles (CNPs) by using the electrospraying deposition technique considerably increased the antifungal effectiveness of the Origanum vulgare essential oil. Our results highlight the potential use of the chitosan nanoparticles (CNPs) loaded with different amounts of Origanum vulgare in food and agriculture industry as an effective fungicidal material against Alternaria alternata, suggesting that the CNPs can be promising tools to compete with synthetic fungicide counterparts and limit use of synthetic ones for struggling of food and plant pathogens. Therefore, the results of this study should be of great importance to industrial applications in terms of development of natural, but effective preservatives as alternative to synthetic ones. In this respect, the CNPs would find a great industrial application area in the food and agriculture industry which seek natural preservatives due to the recent health concerns.
AtıfScopus119WoS101OpenAlex118İncele - MakaleAçık Erişim2019Scopus SJRQ1Characterization of chemical, molecular, thermal and rheological properties of medlar pectin extracted at optimum conditions as determined by Box-Behnken and ANFIS models
Al-Amoudi, Rami H.; Taylan, Osman; Kutlu, Gozde; Can, Asli Muslu; Sagdic, Osman; Dertli, Enes; Yilmaz, Mustafa Tahsin
In this work, response surface methodology and adaptive neuro-fuzzy inference system approaches were used to predict and model effect of extraction conditions of pectin from medlar fruit (Mespilus germanica L.). The pectin extracted at optimized conditions (89 °C, 4.83 h and 4.2 pH) could be classified as high methoxyl pectin. Sugar composition analysis showed that pectin was mainly composed of D-galacturonic acid, L-arabinose, L-rhamnose, D-galactose and D-glucose. Fourier Transform Infrared Spectroscopy, RAMAN and nuclear magnetic resonance spectra confirmed molecular structure, revealing presence of D-galacturonic acid backbone. X-ray diffraction patterns revealed an amorphous structure. Differential scanning calorimetry showed endothermic (123 °C) and exothermic peaks (192 °C). Thermogravimetric analysis revealed three decomposition regions, 50–225 °C, 225–400 °C and 400–600 °C. Steady and dynamic shear analyses revealed that pectin had a pseudo-plastic behavior with storage (G′) and loss (G″) modulus increasing with increment in frequency, indicating viscoelastic structure more predominantly elastic than viscous.
AtıfScopus89WoS79OpenAlex83İncele - MakaleYalnız künye2019Scopus SJRQ3Response surface methodology as optimization strategy for asymmetric bioreduction of acetophenone using whole cell of Lactobacillus senmaizukei
Çolak, Nida Sezin; Şahin, Engin; Dertli, Enes; Yilmaz, Mustafa Tahsin; Taylan, Osman
Whole cell applications are one of the main methodologies for the bioreduction of prochiral ketones to obtain enantiomerically rich chiral secondary alcohols which are mainly affected by the culture parameters of the whole cell. In this study, whole cell of Lactobacillus senmaizukei as a safe Lactic Acid Bacteria (LAB) was used for the reduction of acetophenone and Response Surface Methodology (RSM) application was used to optimize the culture parameters in terms of temperature, pH, incubation time, and agitation level to obtain the highest enantiomeric excess (ee) and conversion rate. The predicted optimum conditions for the bioreduction with whole cell Lactobacillus senmaizukei were found to be pH of 5.25, temperature of 25 °C, incubation time of 72 hr, and agitation level of 100 rpm. Importantly, the efficiency of the reduction of the acetophenone was significantly affected by the linear and quadratic effects of culture parameters. These findings are important to show the role of culture parameters for the bioreduction reactions and also the efficiency of the RSM technique to optimize these parameters.
AtıfScopus10WoS10OpenAlex11İncele - MakaleYalnız künye2019Scopus SJRQ1Effect of electrospun nisin and curcumin loaded nanomats on the microbial quality, hardness and sensory characteristics of rainbow trout fillet
Meral, Raciye; Alav, Aslıhan; Karakas, CananYagmur; Dertli, Enes; Yilmaz, Mustafa Tahsin; Ceylan, Zafer
Nisin and curcumin loaded (NCL) nanomats having 172 nm mean diameter were successfully fabricated. The effect of NCL nanomats in terms of limitation of Total Mesophilic Aerobic (TMAB) and Lactic acid bacteria (LAB) in fish fillets was tested during the analysis period. On the 4th day, while TMAB load of C was 6.61 log CFU g−1, that of the sample coated with NCL nanomats was found to be 3.28 log CFU g−1. TMAB load of control samples reached above 6 log CFU g−1 on the 4th day of cold storage, TMAB load of fish samples coated with nanomats reached the same level up to the 12th day. The shelf life of coated fillets was extended to 12 day. 3–4 logarithmic decrease was obtained in LAB count by NCL nanomats during the analysis period. On the 4th storage day, the hardness value of C sample decreased 21% compared to NCL samples. All sensory attributes of C samples were acceptable by the 4th day of the storage; while sensory attributes of NCL samples were acceptable by the 10th day of storage. The study revealed that nisin and curcumin loaded nanomats could be effectively used to improve the quality of fish fillets.
AtıfScopus92WoS84OpenAlex91İncele - MakaleYalnız künye2019Scopus SJRQ1Partial characterization of a levan type exopolysaccharide (EPS) produced by Leuconostoc mesenteroides showing immunostimulatory and antioxidant activities
Taylan, Osman; Yilmaz, Mustafa Tahsin; Dertli, Enes
Leuconostoc mesenteroides S81 was isolated from traditional sourdough as an exopolysaccharide (EPS) producer strain. The monosaccharide composition of the EPS from strain S81 was characterized by HPLC analysis and only fructose was found in the repeating unit structure. The NMR spectroscopy analysis revealed that EPS was a levan type EPS as a β-(2 → 6)-linked fructan. The FTIR analysis further confirmed the presence of the furanoid rings in the EPS structure. The levan S81 showed high level of thermal stability determined by DSC and TGA analysis. The lyophilised levan S81 showed a sheet-like compact morphology and its aqueous solution formed spheroidal lumps with a compact structure detected by SEM and AFM analysis, respectively. Importantly the levan S81 showed a high level of immunomodulatory role, induced the anti-inflammatory cytokine IL-4, and exhibited a strong antioxidant capacity with EC50 value 1.7 mg mL−1 obtained by hydroxyl radical scavenging activity test under in vitro conditions. These findings reveal potential of levan S81 for technological purposes and as a potential natural immunomodulatory and antioxidant.
AtıfScopus132WoS112OpenAlex126İncele - MakaleAçık Erişim2019Scopus SJRQ1Non-linear rheological (LAOS) behavior of sourdough-based dough
Yildirim-Mavis, Cigdem; Yilmaz, Mustafa Tahsin; Dertli, Enes; Arici, Muhammet; Ozmen, Duygu
During processing, wheat dough is known to undergo large deformation led by mixing and fermentation processes. This deformation is much more pronounced when sourdough is used in the recipe of wheat dough whose gluten is considerably hydrolyzed during sourdough fermentation. This causes deeper effects on rheological properties and shelf life of bakery products. Traditional small amplitude oscillatory tests do not enable us to comprehend the viscoelasticity under large deformations. In this respect, large amplitude oscillatory shear (LAOS) tests are useful for accurate characterization of the non-linear mechanical response. This study, therefore, is undertaken to investigate the non-linear mechanical response of dough prepared with different amounts of sourdough (0, 10, 20 30 and 40%) in a strain values ranging from 0.005 to 200% (frequency at 10 rad/s). As a result, sourdough was determined to have considerable effects on the non-linear viscoelastic response of dough. Strain-stiffening and shear-thinning behaviors were considerably influenced by sourdough incorporation and the dough started to show strain-softening and lowered shear-thinning behavior after giving a peak around at 100% strain due to the onset of the breakdown of the gluten network and suspension of starch matrix as consequence of the metabolic activity of the starter culture (Lactobacillus brevis E25) used in the preparation of sourdough. The physicochemical (pH and TTA), microbiological properties (LAB count) and extensographic properties were also shown to support the LAOS results. LAOS tests could be effectively and clearly used to reveal the effect of processing conditions (sourdough content and deformation by large strain amplitude) on the non-linear mechanical response of wheat dough.
AtıfScopus49WoS46OpenAlex46İncele