Sürdürülebilir Kalkınma Amaçları

Yazarlar

  • MakaleAçık Erişim2021Scopus SJRQ3
    Response of probiotics and yeast added in different doses to rations of anatolian merino lambs on fattening performance, meat quality, duodenum and rumen histology[1]; [Z anadolu merinos kuzularının rasyonlarına farklı dozlarda ilave edilen probiyotiklerin ve mayanın besi performansı, et kalitesi, rumen ve duodenum üzerine yanıtı]

    Tekce, Emre; Bayraktar, Bülent; Aksakal, Vecihi; Dertli, Enes; Kamiloğlu, Aybike; Karaalp, Musa; Timurkaan, Sema; Gül, Mehmet

    This study investigated the effects of dietary probiotics (Lactobacillus reuteri E81 [LRE], Lactobacillus rhamnosus GG [LRG]), yeast (Saccharomyces cerevisiae S81 [SCS]), and their combined supplementation on fattening performance (BW, DWG, FI, and FCR), meat quality, and rumen and duodenum histology in lambs. The study material comprised ninety 2.5-month-old Anatolian Merino lambs, and the trial was conducted for 70 days. Nine trial groups, each composed of 10 animals, were established. This study demonstrated that, when compared to the control group, the best fattening performance was achieved in the lambs that received 600 ppm of dietary LRE. Neither visceral organ weights nor rumen and duodenum histology was affected in the groups that received the tested feed supplements. Of the meat colour parameters investigated, the L* value was observed to have increased in the groups that were given feed supplements, excluding Groups LRE-600 and SCS-300. It was determined that the probiotic supplements had no effect on the a* and b* colour parameters, but affected the meat pH value. In conclusion, the assessment of the effects of different doses of dietary probiotics, yeast, and probiotic-yeast combinations on performance parameters, visceral organ weights, and meat quality in Anatolian Merino lambs showed that the best results were achieved in the group that received 600 ppm of LRE alone.

    • SDG 2 · Açlığa Son
    AtıfScopus12WoS11OpenAlex4TR Dizin1
    ScopusWeb of ScienceTR Dizinİncele
  • MakaleAçık Erişim2021Scopus SJRQ2
    Fatty acid compositions and quality of egg and performance in laying quails fed diet with hesperidin

    Özbilgin, Abdullah; Kara, Kanber; Gümüş, Recep; Tekçe, Emre

    This study investigates the effects of hesperidin on eggs’ internal and external quality parameters, the fatty acid in egg yolk, and the nutrient content adding different amounts of hesperidin to the quail diets. A total of 150 Japanese quails (Coturnix coturnix japonica) were divided into three groups (0% hesperidin group (n = 5 × 10) (control group; HES0), 0.1% hesperidin group (HES1), and 0.2% hesperidin group (HES2)) with five replicates. It has been found in the analysis that hesperidin did not affect the weight and thickness of the shell from the external quality parameters of the egg (P > 0.05), but in terms of the HES1 and HES2 groups, the weight of the egg increased compared to the HES0 group, while the fracture resistance of the shell decreased (P < 0.05). Eggs’ internal quality parameters have shown that the egg white width (P < 0.05) and the yolk diameter (P < 0.01) increased in the HES1 and HES2 groups, and the length of white decreased (P < 0.05). It has been found that n-6 (linoleic acid) and n-3 (docosahexaenoic acid) fatty acid values increased significantly according to hesperidin dosage (P < 0.05) from the parameters of the composition of fatty acids of the eggs. As a result, it is believed that hesperidin added to the diet has a generally positive effect on the fatty acid composition and internal and external quality parameters of the eggs and would be appropriate to use it as a feed additive.

    • SDG 2 · Açlığa Son
    AtıfScopus8WoS8OpenAlex9
    ScopusWeb of SciencePubMedİncele
  • MakaleAçık Erişim2021Scopus SJRQ2
    Design and Experimental Studies on Superconducting Maglev Systems with Multisurface HTS-PMG Arrangements

    Abdioglu, Murat; Ozturk, Kemal; Ekici, Mehmet; Savaskan, Burcu; Celik, Sukru; Cansiz, Ahmet

    In this article, we have designed and constructed a new multisurface (MS) high temperature superconductor (HTS) Maglev measurement system to investigate the enhancement of magnetic force properties of Maglev systems via MS HTS configurations above conventional permanent magnetic guideway (PMG). We have investigated both the static force and stiffness behavior and dynamic response characteristics of these MS HTS-PMG arrangements in different field cooling heights (FCHs). Optimum cooling height is determined as FCH 20-30 for both six- and four-HTS configurations. The maximum levitation force values of HTS-PMG arrangement with six-HTS were obtained bigger than that of four-HTS in the unit cryostat volume of MS arrangement, indicating that the HTSs at the bottom side of the cryostat make contribution to the loading capacity of Maglev systems. In the present article, it is observed that the magnetic flux density of bottom surface in addition to upper surface of the PMG can make a contribution to loading performance, vertical and lateral stability of Maglev systems. It is thought that the designed measurement facility and results of this study will be beneficial to increase the magnetic flux density in the unit volume via MS HTS-PMG arrangements for future design and construction of the HTS Maglev systems.

    AtıfScopus16WoS6OpenAlex15
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2021Scopus SJRQ1
    Photovoltaic performance of non-covalent functionalized single-layer graphene in dye-sensitized solar cells (DSSCs)

    Igman, Erdal; Bayram, Ozkan; Mavi, Ahmet; Hasar, Ugur Cem; Simsek, Onder

    In this study, it was aimed to fabricate new effective alternative counter electrodes (CEs) in dye-sensitized solar cells (DSSCs). For this purpose, firstly, single-layer graphene (SLG) thin films were grown by chemical vapor deposition (CVD) method. Then, these films were separately functionalized with 1,8-cineole (ppCin/SLG), D-Limonene (ppLim/SLG) and Thiophene (ppTh/SLG) by plasma polymerization. Number of layers in CVD-grown graphene determined by Raman, transmission electron microscope (TEM) and ultraviolet–visible (UV–Vis) spectroscopy. Chemical structures of plasma polymerised (pp) thin films were investigated by Fourier transform infrared (FTIR) spectroscopy. Photovoltaic parameters of DSSCs were calculated, and electrocatalytic properties of CEs were investigated by electrochemical impedance spectroscopy (EIS). Polymer functionalization greatly enhanced the electrical conductivity and electrocatalytic activity properties of graphene compared to that of SLG. The efficiencies of DSSCs with ppCin/SLG and ppLim/SLG CEs were 1.10% and 1.02%, respectively. As a result, the cell efficiencies of ppCin/SLG and ppLim/SLG could be as alternative materials to platinum (Pt) counter electrode.

    • SDG 7 · Erişilebilir ve Temiz Enerji
    AtıfScopus14WoS13OpenAlex14
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2021Scopus SJRQ2
    Targeting cov-2 spike rbd and ace-2 interaction with flavonoids of anatolian propolis by in silico and in vitro studies in terms of possible covid-19 therapeutics

    Güler, Halil İbrahim; Ay Şal, Fulya; Can, Zehra; Kara, Yakup; Yildiz, Oktay; Beldüz, Ali Osman; Çanakçi, Sabriye; Kolayli, Sevgi

    Propolis is a multi-functional bee product rich in polyphenols. In this study, the inhibitory effect of Anatolian propolis against SARS-coronavirus-2 (SARS-CoV-2) was investigated in vitro and in silico. Raw and commercial propolis samples were used, and both samples were found to be rich in caffeic acid, p-coumaric acid, ferulic acid, t-cinnamic acid, hesperetin, chrysin, pinocembrin, and caffeic acid phenethyl ester (CAPE) at HPLC-UV analysis. Ethanolic propolis extracts (EPE) were used in the ELISA screening test against the spike S1 protein (SARS-CoV-2): ACE-2 interaction for in vitro study. The binding energy values of these polyphenols to the SARS-CoV-2 spike and ACE-2 protein were calculated separately with a molecular docking study using the AutoDock 4.2.6 program. In addition, the pharmacokinetics and drug-likeness properties of these eight polyphenols were calculated according to the SwissADME tool. The binding energy value of pinocembrin was highest in both receptors, followed by chrysin, CAPE, and hesperetin. Based on the in silico modeling and ADME (absorption, distribution, metabolism, and excretion) behaviors of the eight polyphenols, the compounds exhibited the potential ability to act effectively as novel drugs. The findings of both studies showed that propolis has a high inhibitory potential against the Covid-19 virus. However, further studies are now needed.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfScopus35WoS29OpenAlex39
    ScopusWeb of SciencePubMedTR Dizinİncele
  • MakaleAçık Erişim2021Scopus SJRQ2
    The effects of adding Hibiscus sabdariffa L. flowers marmalade on some quality properties, mineral content and antioxidant activities of yogurt

    Arslaner, Ayla; Salik, Mehmet Ali; Bakirci, İhsan

    In this study, the effect of Hibiscus sabdariffa L. flowers marmalade (HM) addition at different ratios (0%, 15%, 20%) was determined on the certain quality properties, total phenolic contents, antioxidant activity, mineral composition and heavy metal content of stirred-type yogurts (C, HM15, and HM20). The marmalade addition increased dry matter, ash, titratable acidity and viscosity whereas decreased pH, fat and protein values. HM addition significantly increased the antioxidant properties of yogurt samples. 2,2-Diphenylpicrylhydrazyl radical-scavenging activity, Copper (II) reducing antioxidant capacity and total phenolic content were found to be in the range of 5.92–26.73 mg TE/100 g, 4.88–15.03 mg TE/100 g, and 5.57–14.69 mg GAE/100 g, respectively. There were no statistically differences between control and HM-added groups in terms of lactic acid bacteria (LAB) counts, also in all samples the total LAB count was above 6 Log cfu/g during the storage. Fe, Mn, B, and Ba mineral values of samples with HM were higher than control sample. Cd, As, Hg and Li heavy metals were not detected in any of the samples, consequently results were within reliable limits reported by JECFA (Joint FAO/WHO Expert Committee on Food Additives) and Turkish Food Codex. As a result of the sensory evaluation, the samples containing 20% HM generally received higher scores than the samples containing 15% HM. Considering all the parameters, it was concluded that HM yogurts can be used as a different type in the functional yogurt industry due to its pleasant and characteristic taste.

    • SDG 2 · Açlığa Son
    AtıfScopus44WoS39OpenAlex51
    ScopusWeb of SciencePubMedİncele
  • MakaleYalnız künye2021Scopus SJRQ1
    A regional supplementary cementitious material for the cement industry: Pistachio shell ash

    Tekin, İ.; Dirikolu, İ.; Gökçe, H.S.

    The recycling of agricultural wastes in cementitious products has recently been a trendy approach for the sustainability goals of the world as it ensures economic and ecological advantages in addition to the safe disposal of these wastes. In this regard, the potentiality of a biomass ash obtained from the incineration of pistachio shell to serve as a supplementary cementitious material is documented in the present study. An increase of up to 30% in the amount of pistachio shell ash resulted in the proportional increase of both water requirement and setting time of the ordinary Portland cement by up to 54% and 300%, respectively. The incorporation of up to 20% pistachio shell ash into the cement yielded specimens of comparable or higher compressive strength values relatively varying between 98% and 117% at the 28 days and later curing ages. Beside the cementitious property, it was observed that a presence of graphitic structures in the pistachio shell ash remarkably improved the mechanical and the microstructural properties of cement mortars. In conclusion, at least 10% incorporation of this ash into the cement is highly recommended for the cement industry as it is beneficial in achieving the highest ultimate (400-day) compressive strength and promotes no loss on the early (2-day) compressive strength.

    • SDG 9 · Sanayi, Yenilikçilik ve Altyapı
    • SDG 12 · Sorumlu Üretim ve Tüketim
    AtıfScopus41WoS38OpenAlex45
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2021Scopus SJRQ1
    Removal of Cu(II) from aqueous solutions using modified sewage sludge ash

    Kul, S.

    The study aims to determine Cu(II) adsorption from wastewater in the laboratory condition using modified sewage sludge ash as adsorbent which was obtained from a thermal drying and incineration facility. This procedure was completed with an inexpensive pollutant material which has high metal-binding capacity and is available in abundant amounts. During experiments, the effects of particle size, pH, stirring speed, initial ion concentration, adsorbent dosage and temperature were investigated. Adsorption equilibrium was obtained in 10 min. Maximum Cu(II) removal was calculated as 83.63% with 20 mg L−1 initial Cu(II) ion concentration and 5 g L−1 adsorbent dosage. Kolmogorov–Smirnov normality test was performed to test the conformity of the data obtained as a result of the study to variance analysis, and it was determined that the data were distributed normally (p > 0.05). Levene test was performed for homogeneity test, and it was determined that the data were distributed homogeneously (p > 0.05). Langmuir was determined as the most suitable isotherm model for Cu(II) adsorption. Adsorption kinetics abided by the pseudo-second-order model. Based on kinetic studies, the adsorption process was endothermic with maximum adsorption capacity calculated as 7.53 mg g−1. The results of thermodynamic research showed the adsorption reaction was spontaneous (ΔG° < 0), endothermic (ΔH° > 0) and reversible (ΔS° > 0 and close to zero).

    • SDG 6 · Temiz Su ve Sanitasyon
    • SDG 12 · Sorumlu Üretim ve Tüketim
    AtıfScopus10WoS10OpenAlex12
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2021Scopus SJRQ1
    Synthesis and characterization of Bifidogenic raffinose-derived oligosaccharides via acceptor reactions of glucansucrase E81

    İspirli, Hümeyra; Bowman, Michael J.; Skory, Christopher D.; Dertli, Enes

    Glucansucrases can perform acceptor reactions with different sugars to produce distinct oligosaccharides which can potentially act as prebiotics depending on their characteristics. Using cheap substrate sucrose and under mild and environmentally friendly conditions, glucansucrase-derived oligosaccharides can be produced with high yields. In this study, raffinose-derived oligosaccharides up to degree of polymerization (DP) 7 produced by glucansucrase E81 were characterized and their prebiotic functions were evaluated. The main product was a DP 4 oligosaccharide containing two products formed by the transfer of the glucose to raffinose at either the 3- (81%) or 4-O (19%) position of its galactose residue confirmed by NMR spectroscopy and LC-MS-LTQ analysis. The purified DP 4 raffinose-derived oligosaccharides were subjected to in vitro human gastric fluid and α-amylase digestion tests and no digestion was observed under both cases. Finally, prebiotic potential of DP 4 raffinose-derived oligosaccharides was tested with probiotic and pathogenic strains and only growth of Bifidobacteria promoted, thus supported the Bifidogenic activity of DP 4 raffinose-derived oligosaccharides.

    AtıfScopus8WoS6
    ScopusWeb of Scienceİncele
  • MakaleYalnız künye2021Scopus SJRQ1
    Graphical Method for Examining Complex Natural Frequencies of Dispersive Materials

    Hasar, Ugur C.; Ozturk, Gokhan; Barroso, Joaquim J.; Gurbuz, Tolga U.; Kaya, Yunus; Ertugrul, Mehmet

    A graphical method is extended to and applied for visual inspection of solution patterns (region of complex natural frequencies sₙ) in the complexs-plane for dispersive materials characterized by the Debye and Lorentz models. These patterns are in the form of exponential decay and C-shaped profiles for the Debye and Lorentz models, respectively. Their forms are observed to be affected (e.g., moving left/right) in different manners with a variation of dispersion parameters. This method, thanks to its visual inspection capability, can help in analyzing/synthesizing filters and frequency-selective surfaces.

    AtıfScopus6WoS6OpenAlex7
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2021Scopus SJRQ3
    Legendre Matrix Method for Legendre Curve in Sasakian 3-Manifold

    Aydin, Tuba Aǧirman; Sezer, Mehmet; Kocayiǧit, Hüseyin

    In this study, unit-speed the Legendre curves are studied in Sasakian 3-manifold. Firstly, differential equations characterizing the Legendre curves are obtained and the method used for the approximate solution is explained. Then, the approximate solution is found for one of the characterizations of the Legendre curve with the Legendre matrix collocation method. In addition, a sample application is made to make the method more understandable. And finally, with the help of these equations and the approximate solution, the geometric properties of this curve type are examined.

    AtıfOpenAlex1
    ScopusWeb of Scienceİncele
  • MakaleYalnız künye2021Scopus SJRQ1
    QoSChain: Provisioning Inter-AS QoS in Software-Defined Networks with Blockchain

    Karakus, Murat; Guler, Evrim; Uludag, Suleyman

    Data flows of various applications, such as video conferencing, telesurgery, online-gaming, etc., require particular treatment regarding Quality of Service (QoS) because of their sensitivity to such parameters as high bandwidth, low delay, and so on. However, provisioning of QoS-based routing services across Autonomous Systems (ASes) poses gruelling challenges due to the distributed nature and business confidentially hesitations. This study presents a novel blockchain-aided QoS-enabled inter-AS routing framework, QoSChain (QC), by blending merits of Software-Defined Networking (SDN) and Blockchain technologies. QC framework introduces a coordination framework with mutually distrusting participants that eliminates centralized mediators in provisioning QoS among SDN-enabled ASes. Also, QC reduces the time to set up an end-to-end (E2E) path and the number of messages exchanged and processed by SDN controllers for a QoS flow. Furthermore, it alleviates the concerns of network operators regarding potentially sensitive information disclosure resulting from the required information sharing for QoS-based cross-AS paths by masking details of any confidential information. Experimental results verify the feasibility of the proposed framework on E2E QoS-based routing among SDN networks. This work aims at being a useful primer for researchers in providing insights on how blockchain can be deployed in QoS-enabled routing.

    • SDG 9 · Sanayi, Yenilikçilik ve Altyapı
    AtıfScopus32WoS21OpenAlex30
    ScopusWeb of Scienceİncele
  • Derleme MakaleYalnız künye2021Scopus SJRQ4
    The effect of muscle electrical stimulation on muscle stiffness problems and musculoskeletal pain caused by muscle imbalance: A systematic review

    Saatchian, Vahid; Türkmen, Mutlu; Esfahani, Mahdi; Zadeh, Reza Amin; Talib, Ahmed Mushtaq; Azimkhani, Amin

    Whole Body Electrical Stimulation (WB-EMS) is a relatively new training method that has been used extensively in recent years, however, the lack of consensus on the efficacy of Whole Body Electrical Stimulation exists, and the aim of this study is to investigate the effects of this method on postural structure problems and musculoskeletal pain. Summary of articles by ISC, Google Scholar, American Journal of Sports Medicine, PubMed Journal of Rehabilitation Medicine, Cochrane, and Sports Medicine Journals between 2000 and 2019 were studied to identify all studies that report electrical stimulation applied simultaneously to the upper and lower limbs. Keywords: Electrical stimulation, Electrical muscle stimulation, Functional electrical stimulation, Whole body electrical stimulation, Wearable sensors, Electrotherapy, Electrode vest, Electrode vest for treatment and rehabilitation, E-fit, Electronic muscle stimulation, Whole body electronic muscle stimulation, Electronic Stimulation, Electronic Suit, Wearable Sensor, and Electrotherapy were used to obtain relevant articles and finally, 22 articles were compared according to the set criteria of 107 papers. Based on the results of studies on the effects of Whole Body Electrical Stimulation, this tool is based on parameters such as muscle strength, muscle size, body composition, obesity, sarcopenia, sarcopenia- induced obesity and pain reduction in non-specific chronic low back pain patients, have a significant positive effect. Due to the lack of studies on the effects of Whole Body Electrical Stimulation and the inconsistency between studies and the lack of similar consensus, further research is needed.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfScopus4WoS3
    ScopusWeb of Scienceİncele
  • MakaleYalnız künye2021Scopus SJRQ1
    The effects of fuel type onto the structural, morphological, magnetic and photocatalytic properties of nanoparticles in the synthesis of cobalt ferrite nanoparticles with microwave assisted combustion method

    Karakas, İbrahim Hakkı

    In this experimental study, the synthesis of cobalt ferrite nanoparticles, one of the most important types of ferromagnetic spinel ferrite materials was realized by using a method known as microwave assisted combustion method. The effects of the substance used as fuel on the structural, morphological, magnetic and photocatalytic properties of synthesized nanoparticles were investigated. Firstly, samples were prepared using urea, glycine and citric acid as fuel and then the samples were comprehensively characterized by advanced analysis techniques such as XRD, FT-IR, TEM, SEM, VSM, BET. Moreover, the usability of the obtained nanoparticles in photocatalytic degradation process of Procion Yellow H-E3G textile dye as photocatalyst was investigated. The results obtained indicate that the fuel used is highly effective on various properties of the synthesized materials. From the experiments performed to evaluate the photocatalytic performances of the nanoparticles, it was observed that each of the three different fuel matters used for the synthesis of nanoparticles were highly effective on the photocatalytic degradation of the organic pollutant. Furthermore, almost all the dye content in solution was completely removed at the end of the experimental period which lasted for 90 min.

    AtıfScopus50WoS44OpenAlex51
    ScopusWeb of Scienceİncele
  • MakaleYalnız künye2021Scopus SJRQ1
    Physical, mechanical, and radiation attenuation properties of serpentine concrete containing boric acid

    Zayed, A.M.; Masoud, M.A.; Shahien, M.G.; Gökçe, H.S.; Sakr, K.; Kansouh, W.A.; El-Khayatt, A.M.

    Serpentine and boric acid are effective materials to produce the radiation-shielding concrete (RSC) for attenuating the fast and thermal neutrons, respectively. Therefore, this study investigates the effect of boric acid (0, 1, and 3% by cement weight) on the physical, mechanical, microstructural, and radiation shielding properties of serpentine concrete. The results showed that the addition of boric acid hindered the hydration of cement through the generation of amorphous borate material, which encapsulates the cement phases and retards their transformation into hydration products. Such a retardation process negatively influenced the mechanical properties of boric acid-bearing concrete and contributed to the thicker and less condensed interfacial transition zone. Furthermore, unlike total γ-rays, boric acid enhanced the attenuation properties of serpentine concrete against thermal and fast neutrons favoring the former. There was a satisfying agreement between the theoretical and measured values of fast neutron attenuation parameters. However, negligible variations in the theoretical values of photon interaction parameters showed that porosity was the principal reason for the reduction in gamma-ray attenuation as a result of boric acid addition.

    AtıfScopus91WoS88OpenAlex93
    ScopusWeb of Scienceİncele
  • MakaleYalnız künye2021Scopus SJRQ1
    Bioprospection of Metschnikowia sp. isolates as biocontrol agents against postharvest fungal decays on lemons with their potential modes of action

    Oztekin, Sebahat; Karbancioglu-Guler, Funda

    In this study, various fruit were employed as biocontrol yeast reservoirs, and eleven distinct yeast cultures of Metschnikowia sp. belonging to 6 different species were identified with sequence-based analysis of the D1/D2 domain of 26S rDNA. For initial screening, Metschnikowia isolates were tested on Fusarium oxysporum, Botrytis cinerea, Penicillium digitatum, Penicillium expansum, and Alternaria alternata. The highest antagonism was obtained on green and blue Penicillium (83.63–100 %). All tested yeasts showed chitinase activity, while some had protease, pectinase, cellulase, β-1−3 glucanase, and gelatinase activities. Since lemons have high pectin content, three pectinase-free cultures at tested conditions with high in vitro antagonism on Penicillium were selected and used on lemons. The activities of the in vitro antifungal studies were found to be compatible with those of the in vivo, and P. digitatum's incidence was found to be higher than that of P. expansum on lemons. All tested pectinase-free Metschnikowia sp. lead to a significant reduction in the disease incidences and lesions at varying levels. The combined effect of lytic enzyme secretion, iron depletion, and volatile organic compounds (VOCs) production determined the antifungal mechanism of action. M. aff. fructicola demonstrated the highest biocontrol efficacy against Penicillium on lemons with an increasing shelf-life. The use of tentatively pectinase-negative Metschnikowia sp. as an antifungal biocontrol agent on lemons was considered for the first time. The findings will shed light on the effective use of Metschnikowia sp. as a potential biofungicide against the growth of postharvest fungal pathogens.

    • SDG 2 · Açlığa Son
    • SDG 12 · Sorumlu Üretim ve Tüketim
    AtıfScopus57WoS51OpenAlex58
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2021Scopus SJRQ1
    Toolbox for tracking and analyzing crowded mixture of colloidal particles

    Yücel, Harun; Velu, Sabareesh K.P.

    We present a MATLAB-based multiple particle tracking (mPosTracker) algorithm to detect and track crowded colloidal particles that are two-dimensionally imaged using digital video microscopy. Our algorithm adopts three optional detection methods using threshold settings namely; centroid method (CM), radial symmetry method (RSM) and partial radial symmetry method (pRSM). In contrast to other reported algorithms, it allows classifying a maximum of three types of particles based on area or intensity. Furthermore, we include a toolbox to perform quantitative particle analysis like number density, trajectories with mean square displacement, and Voronoi cells with six-fold bond parameters to reveal the physics of examined dataset. To demonstrate the abilities of mPosTracker, we show the analysis outcomes on synthetically and experimentally acquired time-lapse microscopy datasets. mPosTracker is suitable for studying the dynamics of crowd behaviour, self-assembly, and manipulation of multi-component colloids under external fields.

    AtıfScopus2WoS2OpenAlex2
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2021Scopus SJRQ1
    Modal identification and fatigue behavior of Eynel steel arch highway bridge with calibrated models

    Sunca, Fezayil; Ergün, Mustafa; Altunişik, Ahmet Can; Günaydin, Murat; Okur, Fatih Yesevi

    In this paper, modal parameters of the Eynel steel arch highway bridge are identified and the fatigue behavior of the bridge is investigated. Modal parameters were extracted from three ambient vibration tests carried out over the period since the bridge came into service. The bridge became operational in 2009, and experimental measurements were taken in 2010, 2019, and 2021. The Enhanced Frequency Domain Decomposition (EFDD) method in the frequency domain and the Stochastic Subspace Identification (SSI) method in the time domain were used. Modal parameters were compared and any differences found over time in the measurement test results were investigated. Comparison of the results shows that changes in the natural frequencies were very limited and there was no change between the mode shapes. When experimental natural frequencies were compared, the maximum difference between the first and second measurements was calculated as 2.827%. Similarly, the maximum difference between the first and third measurements was 5.587% for the second mode, and around 3% for the other modes. This result is as expected because: (i) the bridge is not subject to heavy vehicle traffic and only connects village roads; (ii) no significant earthquake occurred during this period in the region which might have caused structural damage; (iii) no corrosion was found in the structural system elements as there was no contact with the reservoir water; (iv) no settlement or sliding occurred in the ground and boundary conditions remained unchanged. Moreover, the fatigue behavior of the bridge was investigated using the stress life method and AASHTO LRFD Bridge Design Specifications. To rationalize the results against the fatigue effects, the verified finite element model was used. From the fatigue analyses, it was concluded that the fatigue life of the bridge was within safe limits.

    • SDG 9 · Sanayi, Yenilikçilik ve Altyapı
    AtıfScopus16WoS16OpenAlex16
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2021Scopus SJRQ1
    Assessment of powder flow, functional and microbiological characteristics of ozone-treated skim milk powder

    Sert, Durmuş; Mercan, Emin

    The influence of ozone treatment (OT) of skim milk powder (SMP) on functional, physicochemical characteristics, powder flow behaviours and microbiological quality was evaluated. SMP was ozone-treated for 0 (control), 30, 60, 90 or 120 min. Particle size parameters of samples were not affected by OT. OT increased dispersibility and foaming capacity, but decreased wettability time. The cohesion index of samples ranged from 11.98 to 18.34, with higher treatment times decreasing it. OT significantly decreased the tendency for caking and cohesion, as well as compaction characteristics, and increased the flow stability of ozone-treated samples compared with control. OT could be effective for improving SMP flow behaviours in terms of caking, cohesion, and compaction. OT for 120 min decreased the count of all analysed microorganisms to under the detection limit. Inactivation of microorganisms and improving functional and powder flow characteristics by OT may have applications in dairy powder processing and food safety.

    • SDG 2 · Açlığa Son
    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfScopus17WoS13OpenAlex16
    ScopusWeb of Scienceİncele
  • MakaleAçık Erişim2021Scopus SJRQ2
    Biological activity of Psephellus appendicigerus as a natural agent

    Acet, Tuba; Özcan, Kadriye; Sefalı, Abdurrahman

    Psephellus appendicigerus, is a plant endemic to Turkey, belonging to the Asteraceae family, which is traditionally used in folk medicine in Turkey. The aim of this study is to reveal for the first time the biological activities of this plant and evaluate its potential use as a natural product. For this reason, different extracts (ethanol, methanol, ethyl acetate, and hexane) of the plant’s aerial parts were used in determining the antioxidant (2,20-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid and 1,1-diphenyl-2-picrylhydrazyl assays), antimicrobial (disc diffusion and microdilution methods), and enzyme inhibition activity (calorimetric methods) related to diabetes (α-amylase and α-glucosidase). Moreover, the phenolic constituents were analysed by high performance liquid chromatography. Methanol extract of the plant exhibited significant biological activity compared to other extracts. This extract had the highest amount of chlorogenic acid as phenolic compound. In addition, all extracts showed inhibition against at least one test microorganism. According to the results, P. appendicigerus has the potential to be used as a natural antioxidant, antimicrobial and enzyme inhibitor.

    • SDG 3 · Sağlık ve Kaliteli Yaşam
    AtıfScopus2WoS2OpenAlex3
    ScopusWeb of Scienceİncele