Sürdürülebilir Kalkınma Amaçları
Yazarlar
- Dertli, Enes(116)
- Şahin, Engin(48)
- Kaya, Yunus(46)
- Özen, Soner(46)
- İspirli, Hümeyra(45)
- Pat, Suat(44)
- Şenay, Volkan(42)
- Korkmaz, Şadan(36)
- Yilmaz, Mustafa Tahsin(33)
- Kutlu, Naciye(32)
- Cuce, Erdem(31)
- Öner, Erdal(31)
- Artar, Musa(30)
- Ertugrul, Mehmet(29)
- Hasar, Ugur Cem(29)
- Mercan, Emin(28)
- Bayraktar, Bülent(27)
- Bayram, Sinan(27)
- Can, Zehra(25)
- Ecem Bayram, Nesrin(25)
- Çolak, Murat(23)
- Özdemir, Akın(23)
- Cuce, Pinar Mert(22)
- Sert, Durmuş(22)
- Ayata, Ümit(21)
- Bayram, Ozkan(21)
- Dirican, Ebubekir(20)
- Abdioglu, Murat(19)
- Ayazoglu, Rabil(19)
- Birinci, Ahmet(19)
- Kamiloğlu, Aybike(19)
- Gerçek, Yusuf Can(18)
- Taylan, Osman(18)
- Tozlu, Alperen(18)
- Gul, Volkan(15)
- Hasar, Ugur C.(15)
- Kadakal, Mahir(15)
- Sagdic, Osman(15)
- Ergün, Mustafa(14)
- Kadakal, Huriye(14)
Yayınlar
- Derleme MakaleYalnız künye2023Scopus SJRQ3An overview of frequency-based power split strategies in electric vehicles with battery/supercapacitor hybrid energy storage system
Çorapsız, Muhammed Reşit; Kahveci, Hakan
Energy management in hybrid energy storage systems (HESSs) consisting of battery and supercapacitor packages has an essential role in the efficient and safe use of energy storage devices. In the mentioned HESSs, with frequency separation-based energy management, the source with slow dynamics (eg, batteries) is supported by other sources with fast dynamics (eg, supercapacitors). To realize power sharing in the battery/supercapacitor HESS, the load current is divided into low- and high-frequency components and supplied/allocated from energy storage devices. This review touches on the historical development of electric vehicles and includes extensive information about the battery and supercapacitor. It also comprehensively analyzes frequency separation-based power allocation strategies for battery/supercapacitors HESS. These strategies were investigated in detail regarding their features, advantages, and restrictions. In addition, interconnection circuit topologies and control techniques used in frequency-based power allocation were explained comprehensively. As a result, this study will serve as a guide on frequency-based power separation principles in HESS.
AtıfScopus23WoS14OpenAlex22
İncele - MakaleAçık Erişim2023Scopus SJRQ2Investigating the impact of ICT-trade nexus on competitiveness in Eastern and Western European countries
Soylu, Özgür Bayram; Adeleye, Bosede Ngozi; Ergül, Murat; Okur, Fatih; Lorente, Daniel Balsalobre
Purpose: Since competitiveness is crucial in international trade, this paper contributes to the literature by interrogating the information and communication technology (ICT)-trade nexus on competitiveness in Eastern and Western European countries. Does ICT usage promote or hinder the impact of trade openness on competitiveness? This study attempts to answer two questions: (1) is the interaction of trade and ICT significant in promoting competitiveness? (2) Is the effect significantly different by European classification? Design/methodology/approach: With data on 17 European countries from 2007 to 2020 and using mobile phones and fixed telephone usage as ICT indicators, the study engages the bootstrapped ordinary least squares (BOLS) and method of moments quantile regression (MM-QR) techniques to probe the discourse. Findings: The empirical findings reveal that (1) the interaction of trade and ICT boost competitiveness; (2) the effect of mobile phone is consistent across the full, East, and West European samples; (3) the interaction effect is also significant across the conditional distribution of competitiveness and (4) mobile phones and fixed broadband usage reveal “leapfrog” effect across the quantiles. Overall, the study submits that ICT usage will enhance the impact of trade, and thus, ICT is a critical enabler of competitiveness in Europe; policy recommendations were discussed. Originality/value: To the best of the authors' knowledge, this is the first study examining the interaction effect of trade openness and ICT usage on competitiveness in Europe. In other words, the authors attempt to analyze how ICT usage influences trade-competitiveness dynamics. To fill the gap in the literature, the authors' use a sample of 17 European countries from 2007 to 2020. The variables of interest are the competitiveness index, trade openness, and four ICT indicators (mobile phone, fixed telephone subscriptions, fixed telephone subscriptions, and Internet users).
AtıfScopus16WoS13OpenAlex16İncele - MakaleAçık Erişim2023Scopus SJRQ1Evaluation of Groundwater Vulnerability in the Upper Kelkit Valley (Northeastern Turkey) Using DRASTIC and AHP-DRASTICLu Models
Yıldırım, Ümit
This study aimed to investigate groundwater vulnerability to pollution in the Upper Kelkit Valley (NE Turkey). For this purpose, vulnerability index maps were created using the generic DRASTIC and AHP-DRASTICLu models. The latter model was suggested by adding a parameter to the DRASTIC model and weighting its parameters with the analytical hierarchy process with the GIS technique. The results showed that areas with high and very high vulnerabilities are concentrated around the Kelkit Stream, which flows from east to west in the central part of the study area. In contrast, areas with low and very low vulnerability classes are located in the northern and southern parts of the study area. To validate the model results, a physicochemical characterization of groundwater samples and their corresponding vulnerability index values were statistically compared using the Spearman correlation method. In addition, the single-parameter sensitivity method was applied to analyze the models’ sensitivities. Results revealed a stronger correlation between the vulnerability index values of the AHP-DRASTICLu model (compared to the DRASTIC model) in terms of sulfate (R2 = 0.75) and chloride (R2 = 0.76), while there was a slightly weaker correlation for the electrical conductivity (R2 = 0.65) values of the groundwater samples. Sensitivity analysis indicated that the vadose zone, aquifer media, and land use are the most influential parameters responsible for the highest variation in the vulnerability index. Generally speaking, the results indicated that the AHP-DRASTICLu model performs better than the DRASTIC model for investigating groundwater vulnerability to pollution in the Upper Kelkit Valley.
AtıfScopus9WoS5OpenAlex9İncele - MakaleYalnız künye2023Scopus SJRQ2An algorithmic application with flexible airspace approach
Kökhan, Ahmet; Kökhan, Serhan; Gökdalay, Meriç
Purpose: The purpose of this study is to develop an operational level decision support system model for air traffic controllers (ATCos) within the framework of the Flexible Use of Airspace (FUA) concept to enable more efficient use of airspace capacity. This study produces a systematic solution to the route selection process so that the ATCo can determine the most efficient route with an operational decision support system model using Dijkstra’s Shortest Path Algorithm. Design/methodology/approach: In this study, a new decision support system model for ATCos in decision-making positions was recommended and used. ATCos use this model as a main model for determining the shortest and safest route for aircraft as an operational-level decision support system. Dijkstra Algorithm, used in the model, is defined step by step and then explained with the pseudocode. Findings: It has been determined that when the FUA concept and DSS are used while the ATCo chooses a route, significant fuel, time and capacity savings are achieved in flight operations. Emissions resulting from the negative environmental effects of air transportation are reduced, and significant capacity increase can be achieved. The operational level decision support system developed in the study was tested with 55 scenarios on the Ankara–Izmir flight route compared to the existing fixed route. The results for the proposed most efficient route were achieved at 11.22% distance (nm), 9.36%-time (min) savings and 837.71 kg CO2 emission savings. Originality/value: As far as the literature is reviewed, most studies aimed at increasing airspace efficiency produce solutions that try to improve rather than replace the normal process. Considering the literature positioning of this study compared to other studies, the proposed model provides a new systematic solution to the problems that cause human-induced route inefficiency within the framework of the FUA concept.
AtıfScopus2WoS2OpenAlex2İncele - MakaleAçık Erişim2023Scopus SJRQ1Characterization of the black cumin (Nigella sativa L.) honey from Türkiye
Kemal, Mehmet; Esertaş, Ülkü Zeynep Üreyen; Kanbur, Esra Demir; Kara, Yakup; Özçelik, Ali Erdem; Can, Zehra; Kolaylı, Sevgi
This case report study investigated the botanical, physicochemical, and phenolic compositions, as well as the antioxidant and antimicrobial properties of varying amounts of black cumin honey (Nigella sativa) from Burdur region of Türkiye. The samples had an average moisture value of 17.23% and a Nigella sativa pollen ratio ranging from 19% to 51%. Electrical conductivity (EC) values ranged from 0.36 to 0.54 mS/cm. The average color values of Hunter (L, a, b) were 43.55 (L*), 32.77 (a*), and 64.52 (b*), respectively. The proline contents were ranged from 875 to 1624 mg/kg. The average F/G ratio and F+G value were 1.43±0.11 and 68.75±4.75, respectively. The average of total phenolic (TP) and total flavonoid (TF) contents were 36.87±7.00 mg GAE/100 g and 5.63±1.45 mg QUE/100 g, respectively. The antioxidant capacities of the samples were tested using the ferric reducing/antioxidant power (FRAP) and 2,2-Diphenyl-1-picrylhydrazyl (DPPH) assays, with mean values of 179.40±25.35 μmol FeSO4.7H2O/100 g and 46.07±12.87 mg/mL, respectively. The phenolic composition of the samples were tested using the HPLC-PDA method with 25 phenolic standards. Gallic acid, p-OH benzoic acid, t-cinnamic acid, p-coumaric acid, chrysin, and pinocembrin were determined as common components. The samples exhibited high antimicrobial activities against Staphylococcus aureus, Escherichia coli, Chromobacterium violaceum, Bacillus cereus, Klebsiella pneumoniae, and Acinetobacter haemolyticus, but did not affect Candida albicans, Candida parapilopsis, or Mycobacterium smegmatis.
AtıfScopus27WoS27OpenAlex33İncele - MakaleYalnız künye2023Scopus SJRQ2Ultra-thin reflective multifunctional polarization converter with nested circular ring-shaped metasurface-based for C- and X-band applications
Kaya, Yunus
This article presents a single-layer, ultra-thin and multifunctional polarization converter (PC) design using metasurface. The PC, which is proposed as a single layer, consists of a metal metasurface on the front side of a easily accessible FR-4 material and a metal termination on the back surface. The suggested PC features linear polarization (LP) characteristic within a frequency ranges of 5.21- 5.41 GHz and 7.53- 8.08 GHz in C-band, also 10.59- 10.84 GHz in X-band under normal incidence. It indicates the conversion performance of linear polarization to circular polarization (LP-CP) that has the properties of left-handed circular polarization (LHCP) in frequency range of 5.74–7 GHz in C-band and right-handed circular polarization (RHCP) in frequency range of 8.63- 10.15 GHz in X-band. Besides, the suggested PC provides more than 90% polarization conversion ratio (PCR) value in case of normal incidence (0∘) and over 80% PCR value in case of oblique incidence up to 45∘. Again, the suggested PC offers the same CP feature in two frequency regions where CP conversion takes place under normal incidence for angle of incidence up to 60∘. A prototype of suggested PC was produced, measured, and a good match was found between the results simulated via a commercial electromagnetic (EM) simulation program. Finally, the performance of suggested design is compared with existing studies in literature with its high aspects. In this context, the suggested PC may be useful for C- and X-band applications due to its simple structure, ultra-thin and compactness, low-cost, and performance of LP and CP conversion under wide oblique angles.
AtıfScopus4WoS3OpenAlex3İncele - MakaleAçık Erişim2023Scopus SJRQ1The effect of various industrial dust particles on the performance of photovoltaic panels in Turkey
Güngör, Okan; Kahveci, Hakan; Gökçe, H. Süleyman
The accumulation of dust is one of the main causes of power loss in photovoltaic (PV) farms, and the effect of dust particles’ size and chemistry on system performance is often overlooked. This study has focused on a comprehensive analysis of the effect of different dust particles collected from common industrial production facilities in Turkey on the performance of PV panels in the indoor laboratory environment. The collected dust samples were analyzed to determine the dust sample particles’ chemical properties, size, character, and topography. The data for dust samples at different weights with changes in maximum power point (MPP) of PV panel has been collected using the artificial solar irradiation source system. Thus, the mathematical correlations (R2≥0.965) between the PV panel Thevenin resistance (RTH), fill factor (FF), MPP, and pollution rate were obtained using these collected data and particle swarm optimization (PSO). According to the results of the obtained mathematical correlations, marble dust is 2.3, 3.4, and 4.2 times less polluting than cement, fly ash, and silica fume, respectively. Additionally, it was observed that smaller dust particles block more light than larger ones of the same weight and reduce MPP, FF while increasing the RTH.
AtıfScopus19WoS14OpenAlex21
İncele - MakaleYalnız künye2023Scopus SJRQ1A New Higher-Order Finite Element for Static Analysis of Two-Directional Functionally Graded Porous Beams
Turan, Muhittin; Adiyaman, Gokhan
A new higher-order finite element for the static analysis of two-directional functionally graded (2D FG) porous beams subjected to various boundary conditions based on parabolic shear deformation theory (PSDT) is presented. The main purpose of this study is to predict the deflections and stresses of 2D FG porous and non-porous beams with the help of the proposed finite element. Since a higher-order finite element with a third order polynomial is used, the deflections and stresses can be accurately and rapidly obtained even for short beams. In addition, the new higher-order element is free of shear locking phenomenon without requiring any shear correction factors. Three types of distribution functions were used for porosity in this study. To the author's knowledge, the sinusoidal uneven distribution function (FGP-3) is presented for the first time. The governing equations are derived by Lagrange’s principle using a parabolic shear deformation theory that considers normal and shear deformations. According to a power-law rule, the material change in the beam volume in both directions is defined. The dimensionless maximum transverse deflections, normal stresses, and shear stresses are obtained for various boundary conditions, gradation exponents (px, pz) in the x- and z-directions, porosity coefficient (e), porosity distribution (FGP-1, FGP-2, FGP-3), and the slenderness (L/h). This study's new higher-order finite element gives results compatible with the literature and it can be used to accurately find the deflections and stresses for the 2D FG non-porous or porous beams subjected to various boundary conditions.
AtıfScopus30WoS28OpenAlex26İncele - MakaleYayıncıda açık erişim2023Scopus SJRQ3Solidification analysis for variable thickness aluminum castings: simulation and chill design insights
Yilmaz, Galip; Colak, Murat; Uslu, Emin
Manufacturing high-quality casting parts with complex geometries requires high engineering skill and precision. One essential quality concern is isolated hot spots within the castings, often in thick sections. Each hot spot must be consistently fed or mitigated through directional solidification techniques. The impact of various mold sands and the geometry of chill parts on solidification direction was investigated using specialized casting and general-purpose simulation programs. A parametric optimization method was employed to analyze directional solidification to adjust the geometry of the chill parts. The results indicate that employing diverse mold sands to enhance cooling in the thick sections was a viable strategy for achieving directional solidification in parts where the feeding pathway is obstructed due to changes in cross-section. Furthermore, the study revealed that intricate details in the chill part’s geometry are not critical; however, a minimum volume (or weight) was necessary for adequate directional solidification. Lastly, an easily applicable mathematical model has been developed to determine the required volume of chill parts to ensure successful directional solidification.
AtıfScopus1WoS1OpenAlex1İncele - MakaleAçık Erişim2023Scopus SJRQ2Cheaper, Wide-Band, Ultra-Thin, and Multi-Purpose Single-Layer Metasurface Polarization Converter Design for C-, X-, and Ku-Band Applications
Kaya, Yunus
This article presents the design of wide-band, ultra-thin, and multi-purpose polarization converter utilizing metasurface for C-, X-, and Ku-band applications. Having a topology on a FR-4 substrate with metasurface metallic patterns on the front and an all-metallic surface finish on the back, the unit cell of converter design has symmetry in the (Formula presented.) plane with unique features of having both linear polarization (LP) and circular polarization (CP) property. While the polarization conversion ratio (PCR) of converter in normal incidence case is more than 90% in three different frequency bands of 6.46–6.78 GHz, 10.52–11.85 GHz, and 16.49–17.37 GHz, it shows linear-to-linear polarization feature and a linear-to-circular polarization feature with left-handed circular polarization (LHCP) for the frequency range between 7.28 and 9.40 GHz and right-handed circular polarization (RHCP) for the frequency range between 13.38 and 15.19 GHz. It is also seen that the converter has a PCR value of around 90% for oblique incidence case with incidence angles up to 45 (Formula presented.). Extensive simulations have been conducted to prove the performance of suggested converter with the aid of a commercially-available simulation platform, called CST Microwave Studio. The advantages of suggested polarization converter are low-cost, wide-band, ultra-thin, and having both LP and CP conversion in C-, X-, and Ku-bands.
AtıfScopus13WoS10OpenAlex15İncele - MakaleAçık Erişim2023Scopus SJRQ2Dynamic response of polypropylene honeycomb/polystyrene foam core sandwich composite panels: Experimental and numerical analysis
Caliskan, Umut; Demirbas, Munise Didem; Erdogan, Omer
In this study, dynamically loaded sandwich panels with two different core materials and face sheets made of aluminum alloys (6061-T6) were investigated experimentally and numerically under low-velocity impact. Polypropylene, PP (C3H6)n honeycomb and extruded polystyrene foam, XPS (C8H8)n were preferred as core material. By using the contact force and kinetic energy changes, which were the impact test results of the sandwich panels, the contact and impact resistance was examined. As a result of the tests, damaged regions and permanent central displacement were determined and energy absorption capabilities were demonstrated for two different structures. The results obtained were compared with the results obtained by the open finite element method. In this study, it was shown that the face-sheet thickness of sandwich panels was an important parameter affecting the impact behavior. The behavior of the core material when the face-sheet loses its rigidity was investigated and it was found that polystyrene foam was more effective in preventing impact damage. However, it was found that using the PP honeycomb or XPS was affected the impact behavior in different points.
AtıfScopus10WoS10OpenAlex12İncele - MakaleYalnız künye2023Scopus SJRQ2Comparative evaluation of different drying techniques for beef meat
Kamiloğlu, Aybike; Elbir, Tuğba; Dölek, Muzaffer; Eşrefoğlu, Emine Sedanur
The study aimed to evaluate the influence of different drying techniques (Convective and microwave drying) on beef meat's drying kinetics and color parameters. While drying rates with convective drying vary between.005 and.009 g water/g dry matter, it varies between.014 and.166 g water/g dry matter for microwave drying. Among the model proposed, for the conditions applied in the microwave and convective drying methods, the Midilli model gave a better fit. The Arrhenius-type equation calculated the activation energies of beef samples. Activation energies were 64.15 and 449.86 kJ/mol for convective and microwave drying, respectively. According to measured L*, a*, and b* values and calculated ΔE, C*, and h° values, convective drying at 80°C provided the closest color characteristics to fresh meat. Practical applications: Beef is a perishable food and storage conditions are very important. It is important to have information about the drying methods to be applied in the preservation of these foods in terms of process control. In this study, microwave drying and convective drying methods were examined and it was shown that microwave drying, which is one of the drying methods, shortens the processing time. However, in the convective drying method, color properties similar to the fresh product are provided. This research can provide theoretical guidance for further processing and preservation.
AtıfScopus7WoS7OpenAlex7İncele - MakaleAçık Erişim2023Scopus SJRQ4Theoretical Investigation of (E)-1-(2,4-Dichlorophenyl)-3-[4-(morpholin-4-yl)phenyl]prop-2-en-1-one Molecule As a Possible Potential COVID-19 Drug Candidate: Molecular Docking and DFT Calculations
Ekíncíoğlu, Yavuz
Abstract: In this study, a potential new drug to fight against the COVID-19 virus, (E)-1-(2,4-dichlorophen-yl)-3-[4-(morpholin-4-yl)phenyl]prop-2-en-1-one molecule has been investigated via computational assessment and molecular docking approach. From the conformer analysis and optimization, the most stable structure is determined. For this structure, geometrical parameters, Frontier molecular orbitals analysis, chemical reactivity descriptors, nonlinear optical properties, natural bond orbital, mulliken population analysis, molecular electrostatic potential map and thermodynamic properties of molecule were calculated with standard functional at the B3LYP/6-311++G(d,p) method. The geometric parameters (bond lengths and bond angles) are in good agreement with the experimental values available in the literature. The stability, structural and electronic properties obtained for the molecule can be a significant contribution to the future experimental and theoretical studies. The molecular docking mechanisms between the molecule and 7ALI protein points out that the protein-ligand systems are hydrogen bonding, π-stacking, and hydrophobic interactions.
AtıfScopus4WoS4OpenAlex5İncele - MakaleAçık Erişim2023Scopus SJRQ2The Toughness of Polypropylene Fiber-Reinforced Foam Concrete under Various Uni- and Tri-Axial Compression Loads
Gökçe, H.S.; Öksüzer, N.; Kamiloğlu, H.A.; Eyüboğlu, M.; Yılmaz, F.
Foam concrete has recently become a key construction material in terms of meeting the special needs of modern engineering applications such as thermal insulation, absorption of static and dynamic loads. In this study, the effect of polypropylene fiber content and various uni- and tri-axial compression loads on the toughness response of polypropylene fiber-reinforced foam concrete was investigated. Up to a certain strain level (0.1 mm/mm), the ultimate compression stress of specimens under uni- and tri-axial loading increased from about 1 MPa to 16 MPa with the increased target densities of foam concrete. There was a strain-hardening capability of low-density foam concrete while the specimens failed by strain-softening in the high-density series. The optimum fiber amounts were found to be 3.9%, 4.6%, and 6.4% for low, medium, and high target densities of foam concrete, respectively. At low-density series, the bubbles were observed to be relatively bigger and mostly merged with each other. A reduction in foam content (vice versa, increasing target density of mixture) and the presence of fiber resulted in smaller pore size and a more homogenous distribution of them in the matrix. In conclusion, the desired pore structure and efficient bridging of fibers in the matrix allowed the production of favorable foam concrete with higher toughness.
AtıfScopus14WoS10OpenAlex14İncele - MakaleAçık Erişim2023Scopus SJRQ2The Effect of Different Drying Methods on Bioactive and Nutrition Contents of Bee Bread and Mathematical Modeling of Drying Characteristics
Kutlu, Naciye; Gercek, Yusuf Can; Bayram, Nesrin Ecem
In this study, the aim was to determine the effect of different drying methods (with microwave and hot air) on the color, nutrient and bioactive contents of fresh bee bread. Drying characteristics were also investigated. Microwave and hot air drying were applied at different microwave powers and temperatures, respectively. Lower moisture ratios and highest effective diffusion coefficients were obtained with microwave drying in a shorter time. The Midilli model was found to be the most suitable thin-layer drying model for both methods. Regardless of the drying conditions, moisture, ash, protein, carbohydrate, and lipid proportions were observed to vary in the ranges of 4.9–8.2 %, 1.61–2.67 %, 17.47–32.54 %, 39.92–60.84 %, and 7.10–8.89 %, respectively. The lowest color difference was obtained for the sample dried at 210 W. As a result, it was determined that microwave drying is more suitable for preserving the nutritional and bioactive content of bee bread during drying.
AtıfScopus5WoS3OpenAlex6İncele - MakaleAçık Erişim2023Scopus SJRQ3Investigation of Use of Linden (Tilia tomentosa Moench.) Wood with UV System Varnish Application IN INDOOR Parquet Flooring
Ayata, Ümit; Esteves, Bruno; Domingos, Idalina; Ferreira, José; Tuncay Efe, Fatih; Türk, Mutlu; Çakicier, Nevzat; Gürleyen, Levent; Peker, Hüseyin
Linden wood is used in the making of musical instruments, agricultural hand tools, and in the furniture sector. In this study, the changes in glossiness (parallel (//) and perpendicular (⊥) to the fibers at 20°, 60°, and 85°, the pull-off adhesion test, color parameters (CIEL) and pendulum hardness (König method) of two different UV curable varnishes applied to linden (Tilia tomentosa Moench.) according to industrial application techniques and exposed to artificial weathering were investigated. According to the research results, while L*, ΔH*, and h° decreased with increasing weathering time in both varnish layers, ΔC*, b*, ΔE*, a*, and C* rose. The pendulum hardness grew for Method B but dwindled for Method A. A decrease was found in the adhesion tests for both varnish methods after artificial weathering. The glossiness was generally reduced due to artificial weathering for all the angles and for both directions, with the exception of 85º in Method A. The variance analysis and homogeneity groups showed that the changes in the adhesion, pendulum hardness, L*, a*, h°, C*, perpendicular and parallel to the fibers for 60° and 85° were found to be significantly different with artificial weathering for both methods.
AtıfScopus1WoS1OpenAlex1İncele - MakaleAçık Erişim2023Scopus SJRQ1Attitudes pregnant women in Türkiye towards holistic complementary and alternative medicine and influencing factors: a web-based cross-sectional study
Küçükkaya, Burcu; Işık, Hafsa Kübra
Background: Pregnant women turn to holistic complementary and alternative medicine to cope with problems associated with the changes they experience during pregnancy. This study aimed to determine the attitudes of pregnant women in Türkiye toward holistic complementary and alternative medicine and influencing factors. Methods: This cross-sectional exploratory study was carried out between June and November 2022 with a web-based questionnaire distributed via social media and communication platforms. Two hundred and twenty-one pregnant women participated in the study. A "Participant Identification Form" and the "Attitudes towards Holistic Complementary and Alternative Medicine Questionnaire" were used to collect the data. Logistic regression analysis was used to determine correlations between variables and scale scores. Results: It was determined that 84.2% of the participants had knowledge about traditional and complementary therapies, and 77.8% used traditional and complementary therapies. The participants reported that they preferred faith (77.4%), energy healing (76.9%), massage (75.6%), diet (74.2%), meditation/yoga (62.0%), and herbal (59.7%) traditional and complementary therapies the most, and most of them used these methods to reduce nausea, vomiting, edema, and fatigue during pregnancy. The mean Attitudes towards Holistic Complementary and Alternative Medicine Questionnaire score of the participants was 35.0 (5.04). It was seen that having high school or higher education (p < 0.05), having an income more than expenses (p < 0.001), having received advice from nurses when having a complaint (p < 0.001), having knowledge about traditional and complementary therapies (p < 0.001), and being a practitioner who received services of traditional and complementary therapies (p < 0.001) were positively associated with the utilization of traditional and complementary therapies. Conclusion: In this study, it was determined that the attitudes of pregnant women towards holistic complementary and alternative medicine were high. Their personal characteristics, as well as their knowledge and practice of holistic complementary and alternative medicine affected their attitudes towards holistic complementary and alternative medicine. Obstetrics nurses/midwives should actively participate in training programs on traditional and complementary therapies focused on pregnant women.
AtıfScopus10WoS5OpenAlex9İncele - MakaleYalnız künye2023Scopus SJRQ3Comparison of the critical power estimated by the best fit method and the maximal lactate steady state; [Comparaison entre la puissance critique estimée par la méthode bien-être et l’état d’équilibre maximal du lactate]
As, H.; Cabuk, R.; Norouzi, M.; Balci, G.A.; Ozkaya, O.
Aims: Maximal lactate steady state (MLSS) is accepted as the gold standard method to determine the upper boundary of heavy exercise domain, while critical power (CP) is one of the most practical ways to estimate the lower boundary of severe exercise domain. However, it has been recently discussed that the upper boundary of heavy-intensity exercise domain does not equal to lower boundary of severe-intensity exercise domain. Conversely, the best individual fit method (CPfit) has recently been suggested as an accurate estimation of CP. However, there has not been a comparative evaluation of CPfit versus MLSS. The aim of this study was, therefore, to focus on the comparison of CPfit with MLSS. Methods: Eleven well-trained male cyclists participated in this study. Following the determination of maximal oxygen uptake, MLSS was determined through the performance of standard 30-minute constant work rate exercises performed on separate days. Cyclists performed four constant-load exercises lasting 2–15 minutes on different days. The data were then fitted to mathematical models to obtain CPfit. Bland-Altman plot with 95% limits of agreement (LoA) was used to measure agreement between CPfit and MLSS. Results: According to the findings, CPfit overestimated the work rate corresponding to MLSS (300 ± 38 W vs. 265 ± 39 W; P = 0.001; effect size = 3.28). Bland-Altman results showed high LoA (14 to 55.9 W) and very high bias (bias = 35 ± 10.7 W; P = 0.001; r: 0.96) between CPfit and MLSS. Conclusion: CPfit was not identical for MLSS.
AtıfScopus1WoS2OpenAlex3İncele - MakaleYalnız künye2023Scopus SJRQ1Comparison of bioactive constituents by HPLC–DAD–ESI-MS and UFLC and in vitro antioxidant activities of blossom honey, bee pollen, and propolis
Saroğlu, Öznur; Ecem Bayram, Nesrin; Özçelik, Beraat
The aim of this study was to analyze the total phenolic content, phenolic profile, and antioxidant activity of honey, bee pollen, and propolis samples from Turkey's Black Sea Region. The total phenolic content of these bee products was found using Folin–Ciocalteu's method, and their antioxidant capacity was found using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) and cupric ion reducing antioxidant capacity (CUPRAC) assays. Phenolic compounds of honey samples were characterized by high-performance liquid chromatography coupled to a photodiode array detector and mass spectrometer (HPLC–DAD–ESI-MS), while phenolic compounds of bee pollen and propolis samples were quantified ultra-fast liquid chromatography (UFLC). The total phenolic values for honey, bee pollen and propolis were 6.32–18.21 mg GAE/100 g, 547.64–769.4 mg GAE/100 gr, and 6096.1–11,564 mg GAE/100 gr, respectively. DPPH and CUPRAC values of honey, pollen and propolis were 11.05–21.38% and 0.38–1.48 µmol Trolox/g; 24.67–38.63% and 0.03–0.05 mmol Trolox/g; 11.81–34.12% and 0.47–0.89 mmol Trolox/g, respectively. About 30 different phenolic compounds were identified as quantitative. Our findings have shown that all bee products examined in the study are found to contain gallic acid, naringenin, and caffeic acid. In terms of total phenolic content and antioxidant activity, the bee product extracts were ranked as follows: propolis > bee pollen > honey. The high concentration of phenolic compounds in propolis explains its remarkable antioxidant effect.
AtıfScopus10WoS10OpenAlex10İncele - MakaleAçık Erişim2023Scopus SJRQ1Investigation of student experiences with ChatGPT-supported online learning applications in higher education
Kayalı, Bünyami; Yavuz, Mehmet; Balat, Şener; Çalışan, Mücahit
The purpose of this study was to determine university students' experiences with the use of ChatGPT in online courses. The sample consisted of 84 associate degree students from a state university in Turkey. A multi-method approach was used in the study. Although quantitative data were collected using the Chatbot Usability Scale, qualitative data were collected using a semi-structured interview form that we developed. The data were analysed using descriptive and content analysis methods. According to the findings, ChatGPT exhibits advantages such as a user-friendly interface and fast, concise, relevant responses. Moreover, emphasizing its contribution to the learning process, the information provided was sufficient and topic-oriented. The understandability of the chatbot’s functions and the clarity of their communication were emphasized. However, there are disadvantages such as performance issues, frequency of errors and the risk of providing misleading information. Concerns have also been raised about the potential difficulties chatbots may face in ambiguous conversations and providing insufficient information on privacy issues. In conclusion, ChatGPT is recognised as a potentially valuable tool in education based on positive usability impressions; however, more research is needed for its safe use. Implications for practice or policy • Based on positive usability impressions, students and instructors can use ChatGPT to support educational activities. • ChatGPT can promote and enhance students' personalised learning experiences. • ChatGPT can be used in all higher education courses. • Users should be cautious about the accuracy and reliability of the answers provided by ChatGPT. • Decision-makers should take precautions against risks such as privacy, ethics, confidentiality and security that may arise from using artificial intelligence in education.
AtıfScopus79WoS48OpenAlex76İncele