Yayınlar
Koleksiyondaki öğeler
- MakaleAçık Erişim2024Scopus SJRQ1Effects of the demineralisation degree on physicochemical, functional, microstructural and powder flow properties of whey powder
Bebek, Müşerref; Sert, Durmuş; Mercan, Emin
This study aimed to investigate the effects of the demineralisation process on powder flow, physicochemical, functional, and microstructural properties of whey powders (WP). WP samples were produced from 50, 70 and 90% demineralised sweet whey concentrates. Although the salt, ash, and lactic acid content of the powders decreased with increasing demineralisation, pH increased. D [3,2] (surface area mean diameter) value of WP samples ranged from 28.2 to 60.9 μm, in which demineralisation increased the particle size. The colour values showed increased darkness and yellowness, attributed to the higher demineralisation process. Demineralisation improved solubility and foaming characteristics, whereas it decreased the wettability and dispersibility of samples. The caking and cohesion characteristics of WP were significantly decreased by demineralisation. Demineralisation significantly improved the powder flow characteristics of samples. The cohesion index decreased depending on the demineralisation degree increased. Also, demineralisation decreased the cake strength and compaction coefficient of samples. Mineral content decreased with increasing demineralisation, with some minerals showing more sensitivity to demineralisation than others. Scanning Electron Microscope images showed reduced caking and clustering in samples with higher degrees of demineralisation. The results highlighted the importance of demineralisation as an effective parameter to control the properties of WP. In conclusion, this study demonstrated that the degree of demineralisation had a substantial impact on the physical and functional properties of WP.
AtıfScopus1WoS1OpenAlex3
İncele - MakaleYayıncıda açık erişim2024Scopus SJRQ3Comparison of Color Parameters in Layers of Yacht Varnish, Waxy Varnish, and Stone Varnish Applied to Various Wood Species
Ayata, Ümit; Peker, Hüseyin
In this study, solvent-based yacht varnish, stone varnish, and waxy varnish were applied in two coats using a brush, following industrial application standards, to the surfaces of the following tree species: black alder (Alnus glutinosa L. Gaertn.), curupay (Anadenanthera macrocarpa Benth.), iatandza (Albizia ferruginea), lemon (Citrus limon (L.) Burm.), loquat (Eriobotrya japonica L.), magnolia (Magnolia grandiflora L.), plane (Platanus orientalis L.), sucupira (Bowdichia nitida Benth.), and hornbeam (Carpinus betulus L.). Subsequently, the color parameters (b*, C*, L*, a*, ho, ΔE*, ΔH*, Δb*, ΔC*, Δa*, and ΔL*) of the varnish layers were compared with those of the untreated surfaces. The results of analysis of variance revealed significant differences in all color parameters. Decreases in L* values and increases in a* values were observed for all wood types when treated with three different varnishes. Additionally, in plane, black alder, and hornbeam wood, application of all varnishes resulted in increases in b* and C* values, with decreases in ho values. In sucupira wood, however, decreases were observed in b*, C*, and ho values with the application of all three varnishes. It was observed that a single type of varnish yielded different results on different wood types. This finding was attributed to the different types of resins present in the varnish types used in the study, which resulted in varying outcomes.
- MakaleYalnız künye2023Scopus SJRQ1Utilisation of an active branching sucrase from Lactobacillus kunkeei AP-37 to produce techno-functional poly-oligosaccharides
İspirli, Hümeyra; Korkmaz, Kader; Arioglu-Tuncil, Seda; Bozkurt, Fatih; Sağdıç, Osman; Tunçil, Yunus Emre; Narbad, Arjan; Dertli, Enes
Glucansucrase AP-37 was extracted from the culture supernatant of Lactobacillus kunkeei AP-37 and characteristics of the glucan produced by the active glucansucrase in terms of structural and functional roles were determined in this study. A molecular weight around 300 kDa was observed for glucansucrase AP-37 and its acceptor reactions with maltose, melibiose and mannose were also conducted to unveil the prebiotic potential of the poly-oligosaccharides formed via these reactions. The core structure of glucan AP-37 was determined by 1H and 13C NMR and GC/MS analysis which revealed that glucan AP-37 was a highly branched dextran composing of high levels of (1 → 3)-linked α-D-glucose units with low levels of (1 → 2)-linked α-D-glucose units. The structural features of the glucan formed, demonstrated that glucansucrase AP-37 was an α-(1 → 3) branching sucrase. Dextran AP-37 was further characterised by FTIR analysis and XRD analysis demonstrated its amorphous nature. A fibrous compact morphology was observed for dextran AP-37 with SEM analysis whereas TGA and DSC analysis revealed its high stability as no degradation was observed up to 312 °C. Finally, the prebiotic potential of the dextran AP-37 and the gluco-oligosaccharides produced with the acceptor reaction of α-(1 → 3) branching sucrase AP-37 were determined and promising results were found for the gluco-oligosaccharides to act as prebiotics.
AtıfScopus13WoS12OpenAlex13
İncele - MakaleAçık Erişim2024Scopus SJRQ2Investigating the Effect of Polypropylene Fiber on Mechanical Features of a Geopolymer-Stabilized Silty Soil
Kamiloğlu, Hakan A.; Kurucu, Kutluhan; Akbaş, Dilek
This study investigates the stabilization of silty soil using alkali-activated fly ash and fibers with lengths of 3 mm and 12 mm. The study examines the effects of hybrid fiber length, fiber content, fly ash content, and activator content on the mechanical properties of the geopolymerstabilized samples. The objectives of this paper are 1) to examine the effect of activator content and fly ash content on the UCS, Al/Si ratio, and SiO2/Na2O ratio of the stabilized samples using a statistical approach, 2) to investigate the effect of hybrid fiber length on UCS, secant modulus, flexural strength, toughness, and flexural load-deformation characteristics of the stabilized soil. A statistical approach was employed to investigate the relationship between fly ash content, alkali activator content, and UCS value. Optimal fly ash content and alkali activator content were determined based on the statistical model. The geopolymer structure of the stabilized soil was characterized via SEM, EDS, XRD, and FTIR analyses. The effects of fly ash and alkali activator content on UCS, Al/Si ratio, and SiO2/Na2O ratio were determined using the derived statistical model. The study demonstrated that activator content, a critical factor in compaction, significantly influences the UCS value, as much as the effect of the Si/Al and SiO2/Na2O ratios. Additionally, variations in fly ash content led to an increase in the UCS value of up to 15%. Moreover, changing the activator content resulted in a maximum 12-fold increase in UCS value. Incorporating hybrid fibers for stabilization led to higher secant modulus (up to 30%), flexural strength (up to 6%), and ductility without compromising UCS.
AtıfScopus20WoS17OpenAlex18İncele - MakaleAçık Erişim2024Scopus SJRQ2The relationship between self-efficacy and emotional burnout levels of seafarers: the role of individual alienation – the case of Turkey
Battal, Fetullah; Durmuş, İbrahim; Çınar, Ertuğrul
Purpose: The study aims to examine the factors that may affect the burnout levels of ship workers. Design/methodology/approach: The scope of the research consists of seafarers on ships docking at the ports of Zonguldak, Karadeniz Eregli, Eren and Filyos in the Western Black Sea region of Turkey. The sample consists of officers, engineers, dynamic position operators, electricians, boatswains, able seamans, pumpmans and stewards working on ships. In this respect, a random questionnaire was used in the research method and a questionnaire was sent to 400 of these employees, representing the main sample, and 263 of them fully answered the online questionnaire. Findings: As a result of the research, first of all, it is seen that the increase in the self-efficacy of the seafarers decreases their emotional burnout levels. In the second step, the strong self-efficacy of the seafarers reduced the level of individual alienation. In the third step, the increase in the individual alienation of the ship workers also caused an increase in the levels of emotional exhaustion. Originality/value: As a result, it has been seen that there is a partial mediating role of individual alienation in the relationship between the self-efficacy of the seafarers and their emotional exhaustion. In other words, high self-efficacy is not the only reason for the decrease in emotional burnout levels among seafarers. At the same time, self-efficacy has an effect on the individual alienation levels of seafarers.
AtıfScopus1WoS1OpenAlex2İncele - MakaleYalnız künye2024Scopus SJRQ2Diltiazem and Verapamil: Combined experimental and computational approaches to structural and spectroscopic characterization
Cinar, Mehmet; Can, Sümeyra; Baris, Özlem; Demirci, Çiğdem Elif
Diltiazem and Verapamil are two important drug molecules in a separate group of Calcium Channel Blockers. The purpose of this work is to determine and compare the structural and spectroscopic properties of these two molecules using a number of experimental techniques and quantum chemical calculations. Compounds were characterized spectroscopically using FT-IR, Raman, NMR (1H, 13C, and DEPT), and UV–vis methods. Furthermore, the Density Functional Theory (DFT) method, Becke's three-parameter hybrid functional (B3LYP), and the 6–311++G(d,p) basis set were used to determine the ground state geometric structures of molecules, and the spectroscopic properties of the obtained optimum structures were investigated computationally. The optimization studies performed under vacuum circumstances and for the isolated molecules were found to be very close to the experimental results. In fact, r.m.s. values were discovered for Diltiazem and Verapamil with bond lengths of 0.013 and 0.024, and bond angles of 1° and 2°, respectively. The vibration characteristics of the compounds were discovered using the collected FT-IR and Raman spectra, and significant vibrational modes were assigned. After scaling, it was revealed that the quantum chemical data was congruent with the experimental ones, and that the characteristic vibrational modes were appropriately predicted. DFT calculations effectively determine molecules' structures due to internal consistency, despite being slightly distant from experimental data. Theoretical values for carbon and hydrogen atoms are better in agreement with observed values when scaling with 0.92 and 0.90. From the UV–vis spectra, Diltiazem HCl absorbance peaks were found at 207 and 237 nm, whereas Verapamil HCl absorbance peaks were identified at 203, 229, and 278 nm. When the theoretical calculations and experimental findings were compared, the anticipated absorption peaks were found to have shifted nearer the visible area. Furthermore, Hirshfeld surfaces and Molecular Electrostatic Potential surfaces were obtained and analyzed in order to better understand the electronic characteristics. The TDOS and PDOS (total and partial density of state) spectra were also studied. Finally, using the HOMO and LUMO energy values, the critical chemical parameters were evaluated, and it was discovered that both molecules had positive electron affinity and electronegativity values, indicating that they will accept electrons when the electron-nucleus attraction exceeds the electron-electron repulsion.
AtıfScopus9WoS9OpenAlex9İncele - MakaleAçık Erişim2024Scopus SJRQ3Exergetic Analyses of Detonation Engine Cogeneration Plants
Çakmak, Bahar; Karaali, Rabi
Efficiency improvements are very important in all research and technology. Detonation engines are high technology devices. In the last decades they attracted attention by many researchers. However, detonation engines for cogeneration are not researched efficiently. This article is about the detonation engines cogeneration cycles which analysed by using 1. and 2. law of thermodynamics and exergy analyses methods by the authors. The exergetic performance analyses, their advantage and disadvantages of the ZND-HRSG detonation engine cogeneration cycles were obtained. The exergetic performance analyses were done for various excess air rates to obtain the variations of the combustion exit pressures and temperatures, exergy efficiencies, electric heat rates, SFC and other parameters of their performance. Also, an optimization analysis was done for the ZND-HRSG by searching the optimum values for different excess air rates. The results showed that, the ZND-HRSG cycle have the optimum values of the performance at 1.6-1.8 of the excess air rates.
AtıfScopus1OpenAlex5
İncele - MakaleAçık Erişim2022Investigation of the effect of current density and PH on oil and grease removal from leather industry wastewaters by electrocoagulation method
Bi̇Ngül Reçber, Züleyha; Ekmekyapar Torun, Fatma; Kul, Sinan; İRdemez, Şahset
In this study, the effects of pH and current density on the removal of high concentrations of oil and grease in leather industry wastewater by the electrocoagulation method were investigated. Two different types of electrodes were used in the study. Studies with aluminum electrodes have shown that these electrodes are more effective than iron electrodes in removing oil and grease. In addition, aluminum electrodes are affected more by the system pH than iron electrodes. Studies have shown that higher oil and grease removal efficiencies are obtained below pH 4 for both electrodes. While the oil and grease removal efficiency with Al electrodes is 95% at pH 2, this value decreases to 83% at pH 6. In Fe electrodes, while the removal efficiency is 87.83% at pH 2, it decreases to 83% at pH 6. The effect of current density on oil and grease removal was examined and it was observed that the removal efficiency remained constant above a certain current density in aluminum electrodes. While the efficiency of Al electrodes is 83.31% at 0.6 mA cm-2 current density, this value has increased to about 98% at 1.2, 1.8, and 2.4 mA cm-2 current densities. In Fe electrodes, the oil and grease removal efficiency is 82.66% at 0.6 mA cm-2 current density, while it is 90% at 1.2 and 1.8 mA cm-2 current densities and 98% at 2.4 mA cm-2. These results show that the electrocoagulation process removes the oil and grease in wastewater at a high rate. This shows that this process can also be used as pre-treatment before the biological treatment of industrial wastewater with high oil and grease content. Copyright 2021, Yıldız Technical University.
AtıfScopus2WoS2OpenAlex1İncele - MakaleAçık Erişim2024Scopus SJRQ4Sexual Developmental Characteristics of Intellectually Disabled Adolescents in Türkiye: A Cross-Sectional Analysis
Kirbaş, Zila Özlem; Aktaş, Elif Odabaşi
Purpose: This study aimed to examine the sexual development characteristics of adolescents with intellectual disability in terms of several variables. The data were collected with the Personal Information Form and the Sexual Development Characteristics Scale of Children with Adolescent Mental Disabilities. Method: Independent samples tests, one-way ANOVA tests, and Bonferroni post hoc analyses were conducted to compare the descriptive characteristics of the adolescents and parents with their scale scores. Multiple linear regression analysis was employed to examine the relationships between the dependent and independent variables. Significant differences were identified between certain subdimensions of the scale and the variables. Findings: The sexual arousal subdimension of the scale accounts for 12% of the variance in the dependent variable, the knowledge about physical development subdimension accounts for 10% of the variance in the dependent variable, the sexual satisfaction subdimension accounts for 6% of the variance in the dependent variable, and the sexual self-care subdimension accounts for 11% of the variance in the dependent variable. This difference was explained by the independent variables (R2 adjusted= .12, .10, .06, .11, respectively). Conclusion: In this study, it was found that the sexual development characteristics of adolescents with intellectual disability were affected by the educational status of the mother, the place of residence of the family, the help of the spouse in childcare, the gender of the child, the verbal communication status of the child, the degree of inadequacy of the child, and the ability to meet the personal needs of the child.
AtıfScopus1İncele - MakaleYalnız künye2023Scopus SJRQ1Biological control of green mould on mandarin fruit through the combined use of antagonistic yeasts
Öztekin, Sebahat; Karbancioglu-Guler, Funda
Penicillium digitatum is the primary cause of green mould in mandarins during the postharvest period, mainly controlled through synthetic fungicides. This study evaluated the biocontrol of green mould on mandarin fruit with three antagonistic yeasts (Hanseniaspora uvarum, Meyerozyma guilliermondii, and Metschnikowia aff. pulcherrima P01A016), alone or in combination, by elucidating their possible mechanisms of action. All yeast cultures alone (73.85 % − 80.64 %) and their combinations (78.40 % − 83.18 %) reduced the mycelial growth of green mold in vitro. M. aff. pulcherrima reduced the disease incidence and lesion diameters by 75.5 % and 91.3 %, respectively, demonstrating the highest biocontrolling activity alone. Meyerozyma guilliermondii showed the highest biofilm formation (OD 0.93 ± 0.01) and antifungal activity (71.13 %) through volatile organic compounds (VOCs), while H. uvarum displayed cell-wall degrading β-1,3 glucanase activity together with mycocinogenic and VOCs activity. All tested yeasts showed chitinase, protease, and leucine arylamidase activity. Among dual combinations, M. guilliermondii and M. aff. pulcherrima (M-1) were the most compatible, while M. aff. pulcherrima and H. uvarum (M-3) had the least compatibility. The combined application of these three yeasts resulted in synergistic co-operation, demonstrating the highest biocontrolling efficacy in vitro and in vivo. Integrating multiple mechanisms of action in yeasts could create a hurdle approach for inhibiting green mould in citrus as a green alternative to synthetic fungicides. Thus, our study demonstrated that combining biocontrol yeasts can result in beneficial consortia for the eco-friendly and sustainable management of P.digitatum-caused postharvest diseases of mandarins in both the wounded and intact mandarin fruits.
AtıfScopus42WoS39OpenAlex40İncele - MakaleAçık Erişim2023Scopus SJRQ2Computational Intelligence Based Point of Interest Detection by Video Surveillance Implementations
Tercan, Emre; Tapkın, Serkan; Küçük, Furkan; Demirtaş, Ali; Özbayoğlu, Ahmet; Türker, Abdussamet
Latest advancement of the computer vision literature and Convolutional Neural Networks (CNN) reveal many opportunities that are being actively used in various research areas. One of the most important examples for these areas is autonomous vehicles and mapping systems. Point of interest detection is a rising field within autonomous video tracking and autonomous mapping systems. Within the last few years, the number of implementations and research papers started rising due to the advancements in the new deep learning systems. In this paper, our aim is to survey the existing studies implemented on point of interest detection systems that focus on objects on the road (like lanes, road marks), or objects on the roadside (like road signs, restaurants or temporary establishments) so that they can be used for autonomous vehicles and automatic mapping systems. Meanwhile, the roadside point of interest detection problem has been addressed from a transportation industry perspective. At the same time, a deep learning based point of interest detection model based on roadside gas station identification will be introduced as proof of the anticipated concept. Instead of using an internet connection for point of interest retrieval, the proposed model has the capability to work offline for more robustness. A variety of models have been analysed and their detection speed and accuracy performances are compared. Our preliminary results show that it is possible to develop a model achieving a satisfactory real-time performance that can be embedded into autonomous cars such that streaming video analysis and point of interest detection might be achievable in actual utilisation for future implementations.
AtıfScopus1OpenAlex1İncele - MakaleAçık Erişim2024Scopus SJRQ1Antioxidant activity and phenolic content of bee breads from different regions of Türkiye by chemometric analysis (PCA and HCA)
Can, Zehra; Gıdık, Betül; Kara, Yakup; Kolaylı, Sevgi
The objective of this study was to assess the antioxidant activity and phenolic compounds of bee bread samples obtained from various regions in Türkiye The goal was to characterize and classify 15 of bee bread samples based on their geographical origins. This investigation employed chemometric techniques, specifically principal component analysis (PCA) and a hierarchical clustering algorithm (HCA), for the inaugural comprehensive analysis of all data encompassing antioxidant activity and phenolic compounds in bee bread. The primary objective was to unveil potential clustering patterns among of bee bread samples based on their geographical origins. According to the results, the Total Phenolic Content (TPC) of bee bread samples ranged from 4.393 to 14.917 mg GAE/g dw, while the Total Flavonoid Content (TFC) exhibited variation within the range of 0.681 to 3.504 mg QE/g dw. p-OH benzoic and p-coumaric acids were detected in all samples. Other phenolic compounds were identified in different proportions among the bee bread samples. This study demonstrated the successful application of the PCA chemometric method to assess the antioxidant activity and phenolic compounds of bee bread samples from various regions of Türkiye. The results revealed effective clustering of the bee bread samples based on their geographical origins. Graphical Abstract: (Figure presented.)
AtıfScopus12WoS14OpenAlex16İncele - MakaleAçık Erişim2025Scopus SJRQ1Emotion regulation skills, brain-derived neurotrophic factor, cortisol hormone levels in primary school students in Türkiye: a cross-sectional and correlational analysis study
Kırbaş, Zila Özlem; Bayraktar, Bülent; Odabaşi Aktaş, Elif
Background: Hormones are molecules that contribute significantly to mental and physical health due to their role in emotion regulation (ER) processes. However, the role and effect of hormones on the ER has not yet been fully elucidated. In this study, it was aimed to examine the salivary Brain-derived neurotrophic factor (BDNF) and cortisol hormone response to support ERS in primary school students depending on some parameters. Method: This cross-sectional and correlational study was conducted in the Eastern Black Sea Region of Türkiye between April 2023 and June 2023. In the sample selection, after the number of students was determined in proportional stratification, the sample selection method was made by simple random selection from each class list, first according to the school and then the grade level of each school. A total of 177 healthy students between the ages of 8 and 10 who attended these schools, were allowed to participate in the research by their families, and were volunteers, were included in the study. Data were collected using the Personal Information Form and the Emotion Regulation Scale for Children and saliva collection cups. Human-specific Brain-derived neurotrophic factor ELISA Kit (BT LAB, Cat.No E1302Hu, CHINA) for measuring BDNF levels in saliva; In measuring the level of cortisol hormone in saliva, Human Cortisol ELISA Kit (BT LAB, Cat.No E 1 003Hu, CHINA) was used in accordance with the procedure specified in the manufacturer’s catalogue. Data were evaluated using the SPSS 26.0 for Windows (SPSS, Chicago, Il, USA) package program. Independent Samples Test and One-Way ANOVA test, correlation and Multiple Linear Regression analysis were used to evaluate the data. P <.01 and p <.05 significance levels were used as statistical significance values. Results: A statistically significant correlation was found between the mean total score of the Emotion Regulation Skills Scale for Children and the mean level of salivary BDNF, and a negative correlation between the mean level of salivary cortisol (p˂0.01). Conclusions: Within the scope of the data obtained in our current study, BDNF levels were found to be high and cortisol hormone levels to be low in children with high ERS.
AtıfScopus5WoS4OpenAlex4İncele - MakaleAçık Erişim2026Scopus SJRQ2Analysis of thermal energy storage in batch processes using phase change materials
Kaya, Nur Efşan; Ceviz, Mehmet Akif; Afshari, Faraz; Mandev, Emre; Köksal, Hüseyin
Batch reactors are widely utilized in the chemical, pharmaceutical, and food industries due to their simplicity, ease of operation, and maintenance. However, efficient energy management remains a key challenge, especially for systems operating under intermittent conditions. While phase-change materials (PCMs) offer potential for improving energy efficiency by storing and reusing waste heat, integrating heat storage within reactors can compromise their volume and design. This study introduces a novel approach by designing and experimentally testing a PCM heat battery positioned outside the reactor to reduce energy consumption cost in batch processes. By focusing on peak load shifting, the PCM heat battery stores thermal energy during off-peak periods, reducing operational costs and enhancing energy efficiency. The results indicate that energy operating costs can be significantly reduced with a PCM heat battery. Specifically, utilizing the PCM battery under a three-time tariff allows for the efficient use of energy stored at night, reducing the energy cost per batch process by approximately 8%, from 1.72 TL ($0.041) to 1.59 TL ($0.037) for facilities starting operations at 08:00. Furthermore, the findings suggest potential applications in systems like solar energy and highlight the benefits of peak load shifting, offering a sustainable and cost-effective solution for energy management in batch processing.
AtıfScopus1WoS1OpenAlex1İncele - MakaleAçık Erişim2026Scopus SJRQ2Low-velocity impact analysis of metal-composite joints with grain-refined A356 and reinforced epoxy adhesive using six node pentahedron cohesive elements
Erbayrak, Engin; Colak, Murat; Noberi, Cansu
This study evaluates the strength of double lap joints composed of metal composite adherends and epoxy adhesive subjected to low impact energies (20 J, 40 J). The study was carried out through experimental and numerical methods to understand the strength of lap joints comprehensively. In the production of double lap joints, A356 aluminum and grain-refined aluminum adherends were used as the metal components. To refine the grain structure, titanium (Ti) and boron (B) were added to the liquid metal at a rate of 0.01% of the total metal weight (A356-TiB). The composite laminates consisted of glass/epoxy and aramid/epoxy, made with unidirectionally oriented fibers. Araldite 2015 epoxy adhesive, available in both unreinforced and copolyester-reinforced forms, was utilized to bond the metal and composite materials. In the numerical analysis of double-lap joints, the metal and composite adherends are modeled using 8-node solid elements, while the adhesive is represented by 6-node pentahedron cohesive elements. Furthermore, a surface-to-surface, two-way treatment of contact was created between the impactor and the metal adherend. Consequently, the maximum impact loads obtained from the numerical analysis are in good agreement with the experimental results for both impact energies.
AtıfScopus4WoS5OpenAlex4İncele - MakaleAçık Erişim2025Scopus SJRQ1The impact of osmotic dehydration and microwave drying process conditions on the quality characteristics of celery roots (Apium graveolens l. Subsp. rapaceum)
Kutlu, Naciye
In this study, celery roots were dried by the osmotic dehydration-assisted microwave drying method, and both osmotic dehydration (OD) and microwave conditions were optimized using response surface methodology (RSM). Utilizing a Box–Behnken experimental design, the drying time was minimized while maximizing the total phenolic compounds (TPC) in dried samples at different OD salt concentrations (10, 20 and 30 %), OD temperatures (30, 45 and 60 °C), OD durations (1, 2 and 3 h) and microwave powers (210, 350 and 490 W). The optimal drying conditions were identified as 15.05 % for OD salt concentration, 42.5 °C for OD temperature, 1.6 h for OD duration and 489.7 W for microwave power. Under these optimal conditions, the predicted values for time and TPC were 10 min and 104.38 mg GAE/100 g, respectively. The composite desirability value was 0.99 as a result of optimization. The experimental values for time and TPC were measured as 11 min and 97.45 mg GAE/100 g, respectively. The predicted and experimental values were found to be statistically similar to each other. A comparison with control groups designed to assess the effects of OD and microwave processes revealed that these processes significantly influenced both quality (TPC, antioxidant activity, color) and drying characteristics (drying time, rehydration rate). The greenness assessment value was calculated as 78 using the MoGAPI tool. Consequently, the application of OD pretreatment and use of the innovative microwave drying method as a final drying step in vegetable drying was successfully implemented to enhance the properties of the final product.
AtıfScopus3WoS3OpenAlex4İncele - MakaleAçık Erişim2025Scopus SJRQ2Effect of the coronavirus disease 2019 pandemic on beliefs and practices regarding hand hygiene among intensive care nurses: A repeated cross-sectional study
Karadas, Yasemin Ay; Sahin, Sibel Yilmaz; Dönmez, Elif; Temiz, Gamze
Hand hygiene is an important factor in the prevention of healthcare-associated infections. Studies show healthcare professionals' hand hygiene practices vary and are not at sufficient levels. This study aimed to examine the effect of the COVID-19 pandemic on the beliefs and practices of nurses working in intensive care units (ICU) towards hand hygiene. This was longitudinal, repeated, and cross-sectional study. The study was conducted in 2 phases between January 2,2020 and March 10,2021 in the intensive care unit of a university hospital in northern Turkey. No sampling method was used. The objective was to reach the entire population. The first phase of this study was completed with 119 (76% of the population) ICU nurses and the second phase with 85 (70% of the population) ICU nurses. The data were collected with the personal information form, hand hygiene belief scale (HHBS), hand hygiene practices inventory (HHPI) and the views of the intensive care nurses related to COVID-19. Descriptive statistics such as mean and standard deviations, frequency, and percentages and analytical statistics such as t-test, Mann-Whitney U test, Kruskal-Wallis test were used for data analysis at the significance level of P < .05. The majority of the nurses who participated in the study were female (75.6%; 69.4%), with a mean age of 30.82 ± 5.51 and 30.58 ± 5.51 years, respectively. There was a significant difference (P < .05) between the median HHBS (P = .002) and HHPI (P = .001) scores before and after COVID-19. All nurses (100%) reported that the pandemic was effective in hand hygiene practices. In this study, it was determined that the hand hygiene beliefs and practices of nurses were high, and the scores of nurses' hand hygiene beliefs and practices after COVID-19 increased significantly. Healthcare professionals must always adhere to stringent standards of hand hygiene, rather than merely during periods of heightened challenges. To ensure the sustainability of optimal hand hygiene practices, it is recommended that motivational interventions that strengthen beliefs and practices related to hand hygiene should be implemented and that studies should be conducted to evaluate their effectiveness.
AtıfScopus3WoS3OpenAlex4İncele - MakaleAçık Erişim2025Scopus SJRQ2Performance analysis of piezoelectric-based energy harvesting in reinforced concrete buildings under seismic and live loads
Ergün, Mustafa; Uyar, Mehmet; Malgaca, Levent
The demand for autonomous energy solutions in seismic regions is increasing for the uninterrupted operation of structural health monitoring systems. In this context, energy harvesting systems offer a solution for low-power devices, especially in earthquake zones where external energy sources may be interrupted. This study evaluates the energy harvesting capacity of a piezoelectric energy harvesting mechanism placed at specific locations in the columns of a reinforced concrete structure, considering both earthquake and live load conditions. A smart building model is developed by placing sensor modules with piezoelectric material on the columns of a three-story reinforced concrete building. The finite element model of the smart building, which is formed by integrating various technologies and sensors, is created in ANSYS, and specific locations on the columns are selected as sensor points. Dynamic analyses are performed under earthquake conditions by considering seismic records from the Imperial Valley, Erzincan, and Darfield earthquakes. Experimental results of a smart structure with patched piezoelectric material are used to verify the simulation results. The voltage, current, and power responses obtained from the sensor points are examined with the payload effect placed at the end point of the sensor module. When the power values collected from the sensor points are compared, it can be said that the maximum power obtained from the smart building under both earthquake and live load is 0.355 W, while the minimum power value reaches 0.168 W. The results show that the energy harvesting mechanism can provide external power to support electronic devices in regions where earthquake effects are frequent and high. Thus, this study presents an innovative contribution to smart building systems by investigating the energy harvesting potential under earthquake and live loads in a reinforced concrete structure equipped with piezoelectric sensors. The model, validated with numerical and experimental analyses, proposes a sustainable energy source for structural health monitoring systems in seismic regions.
AtıfScopus1WoS1OpenAlex3İncele - MakaleAçık Erişim2025Scopus SJRQ1Experiences of adults with type 2 diabetes mellitus with low socioeconomic status: a qualitative study
Semerci Çakmak, Vahide; Sönmez Sari, Ebru; Çetinkaya Özdemir, Serap
Background: Adults with diabetes encounter various challenges related to managing their condition. In this study, we explored the experiences of adults with type 2 diabetes mellitus with low socioeconomic status in Türkiye. Methods: This study was conducted as a phenomenological qualitative research. The purposive sampling method was used to select adults with type 2 diabetes. Data saturation was achieved with 20 patients. The data were collected through a demographic information form and a semi-structured questionnaire. The participants were interviewed by phone. The interviews were conducted in a quiet environment where the participants could respond comfortably. During the data analysis process, the content analysis approach suggested by Graneheim and Lundman (2004) was used. This method involves identifying meaningful units within the text, coding these units, and developing sub-themes and main themes. The MAXQDA 20 software was used for data management. Results: The participants were between 41 and 71 years old. Four main themes and ten subthemes were identified in the analysis. Themes: The identified themes included difficulties with dietary management of diabetes, individual difficulties, difficulties with self-management in diabetes, and coping strategies. According to Theme 1, it was observed that the participants experienced difficulties in managing nutrition in diabetes due to the economic aspect of diet and the inability to adapt to the diet. According to Theme 2, it was observed that the participants faced physical, psychological, and social difficulties. According to Theme 3, it was observed that the participants faced difficulties related to diabetes self-management, including blood glucose monitoring, insulin injection administration, and maintaining glycemic control.” According to Theme 4, it was observed that the participants attempted to cope with diabetes-related difficulties through healthy lifestyle habits and family support. Conclusion: Our findings indicate that adults with type 2 diabetes in low socioeconomic status face challenges related to biopsychosocial factors, nutrition, and diabetes self-management. However, these individuals managed their difficulties by adopting healthy lifestyle behaviors and relying on family support. The challenges faced by adults with diabetes may be alleviated through awareness training on dietary management and glycemic control.
AtıfScopus8WoS6OpenAlex9İncele - MakaleAçık Erişim2026Scopus SJRQ1Sport Participation and Happiness Among Veteran Footballers: The Mediating Role of Social Capital
Adatepe, Eda; Kul, Murat; Özkan, Ali; Kırkbir, Fatih; Öz, Ümit; Ünlü, Yılmaz; Seleciler, Cansu; Boz, Emre
Aim: As the global population is aging rapidly, promoting physical activity in later life is increasingly seen as a good strategy to enhance and sustain the social and psychological well-being of older adults from a positive aging perspective. This study explored how social capital influences the relationship between playing football and happiness in veteran footballers. Specifically, it aimed to understand if social capital acts as a mediator between these two factors. Materials and Methods: This cross-sectional study was performed on a convenience sample of 423 veteran footballers aged from 38 to 59 years who completed a survey at 35th Sakarya Veterans Football Tournament in Sakarya in north-west Turkey. Football participation was assessed using the Serious Leisure Inventory. Social capital was assessed in both cognitive and structural aspects. A single-item scale assessed general happiness. Data were analyzed with Pearson correlation coefficients and were calculated using SPSS (version 24) to assess the direction and strength of the links between the investigated variables. Path coefficients were calculated through regression analyses. For testing mediation effects, the study utilized Hayes’ bootstrapping method, executed with the Version 4.2 Beta of the PROCESS macro. Results: According to the research findings, the direct effect of football participation on happiness was determined to be 0.43 (p < 0.01). While community involvement played a significant mediating role with a coefficient of 0.11 (95% CI [0.05, 0.15]), the social trust and neighborhood dimensions of social capital did not yield statistically significant effects. Collectively, the model explains 24% of the variance in happiness (R2 = 0.24), with a total effect of football participation calculated at 0.57 (p = 0.000). Conclusions: it is believed that social environments that include participation in sport can contribute to successful and comfortable aging by greatly enhancing the overall well-being and happiness of older athletes/adults.
