Sürdürülebilir Kalkınma Amaçları
Yazarlar
- Dertli, Enes(24)
- Cuce, Erdem(18)
- İspirli, Hümeyra(14)
- Cuce, Pinar Mert(13)
- Alım, Bünyamin(12)
- Mercan, Emin(12)
- Sert, Durmuş(12)
- Şenay, Volkan(12)
- Tozlu, Alperen(11)
- Artar, Musa(10)
- Korkmaz, Şadan(10)
- Pat, Suat(10)
- Yilmaz, Mustafa Tahsin(10)
- Özen, Soner(10)
- Gökçe, H.S.(9)
- Sagdic, Osman(9)
- Şakar, Erdem(9)
- Bayram, Ozkan(8)
- Demirtas, M.(8)
- Purcek, G.(8)
- Ergün, Mustafa(7)
- Yanar, H.(7)
- Demir, Lütfü(6)
- Taylan, Osman(6)
- Abdioglu, M.(5)
- Abdioglu, Murat(5)
- Alim, Bünyamin(5)
- Carbas, Serdar(5)
- Guclu, Tamer(5)
- Gökçe, H. Süleyman(5)
- Sayyed, M.I.(5)
- Han, İbrahim(4)
- Ozturk, K.(4)
- Zhang, Z.F.(4)
- Zhang, Z.J.(4)
- Özahi, Emrah(4)
- Şahin, Engin(4)
- Abusoglu, Aysegul(3)
- Andiç-Çakır, Özge(3)
- Baltakesmez, Ali(3)
Yayınlar
- MakaleAçık Erişim2016Scopus SJRQ2Effect of external magnetic field on the Kβ/Kα X-ray intensity ratios of TixNi1-x alloys excited by 59.54 and 22.69 keV photons
Perişanoğlu, Ufuk; Alım, Bünyamin; Uğurlu, Mine; Demir, Lütfü
The effects of external magnetic field and exciting photon energies on the Kβ/Kα X-ray intensity ratios of various alloy compositions of Ti-Ni transition metal alloys have been investigated in this work using X-ray fluorescence spectroscopy. The spectrum of characteristic K-X-ray photons from pure Ti, pure Ni and TixNi1-x (x=0.30; 0.40; 0.50; 0.60; 0.70) alloys were detected with a high resolution Si (Li) solid-state detector. Firstly, Kβ/Kα X-ray intensity ratios of pure Ti, pure Ni and TixNi1-x alloys were measured following excitation by 59.54 keV γ-rays from a 200 mCi 241Am radioactive point source without any magnetic field and under 0.5 and 1 T external magnetic fields, separately. Later, the same measurements were repeated under the same experimental conditions for 22.69 keV X-rays from a 370 MBq109Cd radioactive point source. The results obtained for Kβ/Kα X-ray intensity ratios of pure Ti, pure Ni, Ti and Ni in various Ti-Ni alloys were evaluated in terms of both external magnetic field effect and exciting photon energy effect. When the results obtained for both exciting photon energies are evaluated in terms of changing of Kβ/Kα X-ray intensity ratios depending on the alloy composition, the tendency of these changes are observed to be similar. Also, Kβ/Kα X-ray intensity ratios for all samples examined have changed with increasing external magnetic field. Therefore, the results obtained have shown that Kβ/Kα X-ray intensity ratios of Ti and Ni in TixNi1−x alloys are connected with the external magnetic field. The present study makes it possible to perform reliable interpretation of experimental Kβ/Kα X-ray intensity ratios for Ti, Ni and TixNi1−x alloys and can also provide quantitative information about the changes of the Kβ/Kα X-ray intensity ratios of these metals with alloy composition.
AtıfScopus32WoS31OpenAlex32
İncele - MakaleAçık Erişim2016Scopus SJRQ1A novel roof type heat recovery panel for low-carbon buildings: An experimental investigation
Cuce, Pinar Mert; Cuce, Erdem; Riffat, Saffa
Energy saving and its efficient utilization is of prime interest in today's world due to the limited energy resources and growing significance of environmental issues. Despite the intensive efforts to narrow the gap between conventional energy sources (wood, coal, gas, oil, etc.) and renewables, renewable energy resources currently supply only about 14% of total world energy demand. In this regard, energy management and optimization are considered compulsory as much as the clean energy generation. Recent works indicate that the buildings play a significant role on global energy consumption. They are responsible for about 40% of global energy demand. Among the different building types, domestic buildings have the largest share with 63% and most of energy is utilized for heating, ventilation and air conditioning (HVAC) systems in those buildings. Energy consumption levels of buildings can be notably reduced through waste heat recovery in HVAC systems. There are several attempts in literature addressing the possibility of decreasing energy consumption of buildings via waste heat recovery technologies. The heat recovery technologies are cost effective and user friendly applications. The use of heat recovery systems aims at mitigating the energy consumption for HVAC applications as well as the greenhouse gas emissions, and hence decreasing the adverse effects of global warming on the Earth. It is well-documented in literature that the heat recovery systems are very promising for domestic applications. In this paper, experimental results of a novel heat recovery system developed for low-carbon buildings are presented. The proposed heat recovery system consists of a plate-type heat exchanger, blower fans and ducts. The parallel-flow arrangement is used to run the system. The system is designed as under roof application. The aim of the system is to recover waste heat and to preheat fresh air using stale air. The experiments of the system are carried out in winter season in Kent, UK. The study aims to investigate the coefficient of performance (COP) of the system as well as the heat recovery efficiency. The results show that the heat recovery efficiency of the proposed system is around 89% while the COP is 4.5. The proposed system can be used in both winter and summer conditions without requiring additional work. Its labor cost is extremely low, so it is cost-effective and user friendly.
AtıfScopus28WoS23OpenAlex31İncele - MakaleYalnız künye2016Scopus SJRQ2Comparisons of surface and optical properties of the heavily carbon-doped GaN nanocrystalline films deposited by thermionic vacuum arc method
Pat, Suat; Özen, Soner; Şenay, Volkan; Korkmaz, Şadan
In this paper, heavily C-doped GaN samples were deposited on glass and PET substrates by the thermionic vacuum arc (TVA) method, for the first time. Microstructure, surface and optical properties of the carbon-doped GaN samples were investigated by X-ray diffraction (XRD), field emission scanning electron microscopy, atomic force microscopy, and UV–Vis spectrophotometer. According to XRD pattern, fullerene (C60) structures were able to deposit in doped samples, for the first time. The fullerene structures were detected at heavily carbon-doped GaN. The obtained band gap changes of heavily carbon-doped GaN samples are determined. The band gap of CGaN on PET substrate decreased to a lower value, about 100 meV. The band gaps were shifted to the lowest wavelengths towards the edge of the UV region by heavily doped carbon. (002) and (004) peaks for GaN were also detected.
AtıfScopus6WoS5OpenAlex7İncele - MakaleYalnız künye2016Scopus SJRQ1Properties of NaOH activated geopolymer with marble, travertine and volcanic tuff wastes
Tekin, Ilker
In this study, geopolymer composite pastes (GCM) were produced using wastes of marble, travertine and natural pozzolan, with 1 M, 5 M and 10 M NaOH as alkali-activator. Curing process were done at 20, 45 and 75 °C temperatures for 24 h in an oven. And after that GCMs were exposed to wet and dry condition separately. The strength tests were done on the 2nd, 3rd, 7th, 28th and 90th days of curing period. The compressive strengths of the specimens in the wet conditions were reduced depending on time, but in dry conditions were increased with curing time.
AtıfScopus137WoS117OpenAlex149İncele - MakaleAçık Erişim2016Scopus SJRQ1Effects of grain size on room temperature deformation behavior of Zn–22Al alloy under uniaxial and biaxial loading conditions
Cetin, M.E.; Demirtas, M.; Sofuoglu, H.; Cora, Ö.N.; Purcek, G.
Effects of grain size on room temperature (RT) deformation behavior of superplastic Zn–22Al alloy under uniaxial and biaxial loading conditions were investigated. Two–step equal channel angular pressing (ECAP) and subsequent annealing processes were applied to the alloy in order to obtain microstructures with various grain sizes ranging from submicron to micron sizes. Grain size of 200 nm was achieved after ECAP of the alloy, and it was increased up to ~2.60 µm by annealing at 250 °C for different time periods. Changes in deformation behaviors of the alloy with various grain sizes were found to be in good agreement under the uniaxial tensile and biaxial Erichsen test conditions. Increasing grain size decreased both the maximum elongation under uniaxial deformation and limiting dome height (LDH) under biaxial deformation. The high elongation to failure and LDH values for the samples with submicron grain size were attributed to their high strain rate sensitivity.
AtıfScopus20WoS19OpenAlex21İncele - MakaleAçık Erişim2016Scopus SJRQ2Effect of external magnetic field on valence-electron structures of Fe and Ni in Invar, Permalloy and the other Fe-Ni alloys by using Kβ-to-Kα X-ray intensity ratios
Alim, Bünyamin; Han, Ibrahim; Demir, Lütfü
The effect of external magnetic field on the valence-electron structures of Fe and Ni in various Fe-Ni alloy compositions was investigated by using X-ray fluorescence spectroscopy. Kβ-to-Kα X-rayin-tensity ratios of Fe and Ni in Invar(Fe0.64Ni0.36), Permalloy(Fe0.20Ni0.80) and Fe N - i x 1x Firstly,(x=0, 0.40, 0.52, 0.55, 0.61, and 1) alloys were measured without any magnetic field and under 0.5 and 1 T external magnetic fields, separately. Later, the valence-electron structures of Fe and Ni in both pure form and alloys were obtained by comparison of measured X-ray intensity ratios with the results of multi-configurations Dirac-Fock (MCDF) calculations. The results obtained for valence-electron structures of Fe and Ni in various Fe-Ni alloys were evaluated in terms of magnetic field effect, delocalization and/or charge transfer phenomena. The results have shown that valence electron structure of Fe and Ni in Fe-Ni alloys are dependent on both external magnetic field and concentration of alloy elements.
AtıfScopus16WoS14OpenAlex17İncele - MakaleAçık Erişim2016Scopus SJRQ1Exergetic interrelation between an heat pump and components
Çakır, Uğur; Çomaklı, Kemal
In this study, the relation between the exergetic performance of the heat pump and its components are investigated experimentally by using an air to water heat pump. Moreover, the effects of the working conditions of the components on the exergetic performance of the system are exposed and discussed. An experimental air to water heat pump system was designed and built. The results were evaluated by comparing the components and heat pump according to their performances. 33–45% of the all destructed exergy of the heat pump system comes into existence in the compressor. The contribution of the condenser to the total exergy destruction rate of the heat pump is between 23% and 34%. Contribution of the compressor to the exergy destruction rate of heat pump decreases with an increase in the air temperature and it increases with a decrease in the air mass flow rate. Contribution of the compressor to the exergy destruction rate of heat pump decreases with an increase in the air temperature and it increases with a decrease in the air mass flow rate. In terms of exergetic performance of the heat pump, the importance and priority of the components vary with the heat source thermal conditions.
AtıfScopus15WoS14OpenAlex16İncele - MakaleAçık Erişim2016Scopus SJRQ1Development of a fermented ice-cream as influenced by in situ exopolysaccharide production: Rheological, molecular, microstructural and sensory characterization
Dertli, Enes; Toker, Omer S.; Durak, M. Zeki; Yilmaz, Mustafa T.; Tatlisu, Nevruz Berna; Sagdic, Osman; Cankurt, Hasan
This study aimed to investigate the role of in situ exopolysaccharide (EPS) production by EPS+ Streptococcus thermophilus strains on physicochemical, rheological, molecular, microstructural and sensory properties of ice cream in order to develop a fermented and consequently functional ice-cream in which no stabilizers would be required in ice-cream production. For this purpose, the effect of EPS producing strains (control, strain 1, strain 2 and mixture) and fermentation conditions (fermentation temperature; 32, 37 and 42°C and time; 2, 3 and 4 h) on pH, S. thermophilus count, EPS amount, consistency coefficient (K), and apparent viscosity (η50) were investigated and optimized using single and multiple response optimization tools of response surface methodology. Optimization analyses indicated that functional ice-cream should be fermented with strain 1 or strain mixture at 40-42°C for 4 h in order to produce the most viscous ice-cream with maximum EPS content. Optimization analysis results also revealed that strain specific conditions appeared to be more effective factor on in situ EPS production amount, K and η50 parameters than did fermentation temperature and time. The rheological analysis of the ice-cream produced by EPS+ strains revealed its high viscous and pseudoplastic non-Newtonian fluid behavior, which demonstrates potential of S. thermophilus EPS as thickening and gelling agent in dairy industry. FTIR analysis proved that the EPS in ice-cream corresponded to a typical EPS, as revealed by the presence of carboxyl, hydroxyl and amide groups with additional α-glycosidic linkages. SEM studies demonstrated that it had a web-like compact microstructure with pores in ice-cream, revealing its application possibility in dairy products to improve their rheological properties.
AtıfScopus86WoS74OpenAlex98İncele - MakaleAçık Erişim2016Scopus SJRQ1Heavily carbon doped GaAs nanocrystalline thin film deposited by thermionic vacuum arc method
Pat, Suat; Korkmaz, Şadan; Özen, Soner; Şenay, Volkan
In this paper, we introduced a new different thin film deposition method for heavily carbon doped GaAs. Used method is thermionic vacuum arc (TVA) and first used for the carbon doping process. The method is very fast deposition process for the other growth method such as metal organic chemical vapor deposition, molecular beam epitaxy, molecular organic molecular beam epitaxy. The smallest grain size of GaAs and doped GaAs were obtained by carbon doping process. Mean crystalline size and height of crystalline size were found to be 3.4 nm and 4 nm, respectively. Crystal direction was found to be (022) plane and (024) plane for the sample at 45.322° and 75.060°, respectively. The production process and obtained results show that used methods is very simple, low cost, eco friendly and very fast method for the carbon doped GaAs.
AtıfScopus9WoS9OpenAlex10İncele - Derleme MakaleYalnız künye2016Scopus SJRQ1Vacuum glazing for highly insulating windows: Recent developments and future prospects
Cuce, Erdem; Cuce, Pinar Mert
A comprehensive review of vacuum glazing technology from state-of-the-art developments to future prospects has been presented. The review has been conducted in a thematic way in order to allow an easier comparison, discussion and evaluation of the findings. First, a thorough overview of historical development of vacuum glazing has been given. Then, numerous experimental, theoretical, numerical and simulation works on the scope have been evaluated and the characteristic results from the said works have been analyzed. Commercial vacuum glazing products in market have been assessed in terms of several performance parameters such as overall heat transfer coefficient, visible light transmittance, solar heat gain coefficient and cost. Techno-economic and environmental aspects of vacuum glazing technology have also been discussed. It can be concluded from the results that overall heat transfer coefficient of a vacuum glazing can be reduced up to 0.20 W/m2K through optimized integrations with low-e coatings. The incomparable U-value range of vacuum glazing enables significant mitigation in energy consumption levels and greenhouse gas emissions. Retrofitting 25.6 million homes in the UK with vacuum glazing can provide a carbon abatement of about 40 million tonnes a year, which is very promising.
AtıfScopus138WoS117OpenAlex148İncele - Derleme MakaleYalnız künye2016Scopus SJRQ1Toward multi-functional PV glazing technologies in low/zero carbon buildings: Heat insulation solar glass - Latest developments and future prospects
Cuce, Erdem
Heat insulation solar glass (HISG) is a recently developed multi-functional photovoltaic (PV) glazing technology to mitigate energy consumption of buildings and to provide optimum thermal comfort conditions to occupants. In essence, HISG represents an improved transparent amorphous silicon (a-Si) PV module prepared with several optimized coatings and structures. HISG differs from conventional PV glazing products by having some characteristic features such as thermal insulation, sound absorption, self-cleaning and notable energy saving. In addition, HISG has a 100% UV blocking rate and remarkably low shading coefficient, which provides desired lighting related thermal comfort conditions for indoor environments. HISG is also competitive with conventional double glazed products in market in terms of fabrication cost. In this respect, it is highly expected that HISG has a strong potential to dominate the fenestration market in the near future. In this research, a comprehensive review of HISG technology is presented. Power generation, thermal insulation, energy saving, self-cleaning, acoustic and aesthetic features of HISG are evaluated in detail through the state-of-The-art literature survey. Existing research projects on the scope and future prospects are also addressed within the scope of this study.
AtıfScopus75WoS62OpenAlex84İncele - MakaleYalnız künye2016Scopus SJRQ2Morphology, composition, structure and optical properties of CuO/Cu2O thin films prepared by RF sputtering method
Korkmaz, Şadan; Geçici, Birol; Korkmaz, S. Deniz; Mohammadigharehbagh, Reza; Pat, Suat; Özen, Soner; Şenay, Volkan; Yudar, Hafizittin Hakan
In this paper, copper oxide (CuO/Cu2O) nanocrystalline thin films were deposited by radio frequency (RF) magnetron sputtering system at 75 W and 100 W. The surface, optical, composition and structural properties of obtaining samples were characterized by using atomic force microscopy (AFM), UV–Vis spectrophotometer, field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). The optical band gaps of produced films were calculated as 2.05 eV and 1.83 eV for 75 W and 100 W. The layer's thicknesses were measured as 20 nm and 50 nm using a Filmetrics F20. FESEM images of the samples prove the AFM images change and also show homogeneity of thin films and variation relative to power change, thus revealed the surface of samples disturb in homogen mode. EDX results denote presence of Cu and O elements inside the deposited samples.
AtıfScopus56WoS52OpenAlex56İncele - MakaleYalnız künye2016Scopus SJRQ1Energy saving potential of heat insulation solar glass: Key results from laboratory and in-situ testing
Cuce, Erdem; Cuce, Pinar Mert; Young, Chin-Huai
HISG (heat insulation solar glass) is a recently developed multi-functional glazing technology to mitigate energy consumption of buildings. HISG can generate electricity similar to conventional PV (photovoltaic) glazing products when exposed to sunlight, however it differs from them by having some extraordinary characteristic features such as thermal insulation, which is competitive with Argon filled triple glazed windows, acoustic comfort, remarkable energy saving potential and self-cleaning ability owing to TiO2 nano coating. Within the scope of this research, latest results from laboratory and in-situ testing of HISG are presented in terms of its key role in mitigating heating and cooling demand of buildings as well as clean energy generation. Lighting and thermal comfort related parameters such as shading coefficient, UV, IR and visible light intensity are also investigated through the tests conducted in real operating conditions. It is achieved from the results that instant electricity generation of HISG is 16% higher than that of standard PV glazing owing to its nano layer reflective film. Shading coefficient of HISG is only 0.136, which provides almost 80% reduction in solar heat gain compared to ordinary glazing. Indoor air temperature measured from HISG test house in summer time is very close to the ambient temperature, whereas it is found to be 14.7 °C higher in ordinary glass test house due to greenhouse effect. Annual heating and cooling demand tests indicate that HISG provides 38 and 48% energy saving in heating and cooling season, respectively.
AtıfScopus52WoS46OpenAlex56İncele - MakaleYalnız künye2016Scopus SJRQ1A novel antifungal surface-coating application to limit postharvest decay on coated apples: Molecular, thermal and morphological properties of electrospun zein–nanofiber mats loaded with curcumin
Yilmaz, Azime; Bozkurt, Fatih; Cicek, Perihan Kubra; Dertli, Enes; Durak, Muhammed Zeki; Yilmaz, Mustafa Tahsin
Coating surfaces of fruit with electrospun zein mats with functionalized antimicrobial properties can be a novel strategy to prevent fungal colonization on fruit surfaces. In this study, we tested curcumin-loaded electrospun zein nanofibers (CLZN) in terms of limitation of postharvest decay on CLZN–coated apples infected with Botrytis cinerea and Penicillium expansum. Mixtures of zein and curcumin (the curcumin amounts of 2.5 and 5 wt% based on the weight of zein powder) were electrospun to yield cylindrical and ultrafine (< 350 nm in diameter) polymeric nanofibers. In addition, molecular, thermal, zeta potential and morphological properties of the CLZN as well as their encapsulation efficiency and releasing kinetics were determined, revealing that the developed zein-based scaffolds showed high encapsulation efficiency, molecular interactions with curcumin within nanofibers, alterations in physical states of these components, smooth beadless structure and good thermal (an endothermic peak at 152 °C) and dispersion stability (− 24 mV of ζ potential) properties. In vitro antifungal activity tests conducted at 27 °C for six days showed that CLZN were effective against growth of the tested fungal pathogens, exhibiting almost 40–50% inhibition of mycelial growth of the fungal pathogens; but the antifungal effect against P. expansum was but two-fold higher than that against B. cinerea. In vivo tests conducted at 23 °C with 75% humidity for six days confirmed in vitro test results in terms of both visual inspections on uncoated and coated apples, revealing almost 50% reduction in lesion diameter measured on coated apples infected with Penicillium expansum. Our results suggest that CLZN mats open up new opportunities for a novel application of edible and biodegradable antifungal coating material with the ability to hinder fungal proliferation on coated apples during storage period. Industrial relevance We coated the surfaces of fruits with electrospun mats with functionalized antimicrobial properties to prevent fungal colonization on fruit surface. The coating of apples with curcumin-loaded zein nanoparticles (CLZNs) limited the postharvest decay caused by the fungal pathogens, Penicillium expansum and Botrytis cinerea. This study showed that by encapsulation of curcumin into zein-based nanofibers considerably increased the antifungal effectiveness of curcumin. Our results highlighted the potential use of the CLZN as an effective fungicidal coating material against P. expansum and B. cinerea and suggested that CLZNs can be promising tools to compete with synthetic fungicide counterparts of curcumin. The results of this study should be of great importance to industrial applications in terms of development of natural, but effective preservatives as alternative to synthetic ones.
AtıfScopus111WoS85OpenAlex110İncele - MakaleAçık Erişim2016Scopus SJRQ1The impact of internal aerogel retrofitting on the thermal bridges of residential buildings: An experimental and statistical research
Cuce, Erdem; Cuce, Pinar Mert
In this research, internal thermal superinsulation in residential buildings is experimentally and statistically evaluated in terms of potential thermal bridging effects. As a consequence of significant deviations in thermal resistance values in buildings at post-retrofit, large amounts of heat losses occur through non-insulated building elements such as separating walls. Therefore, it is of vital importance to determine the level of energy loss due to such thermal bridges through an internal thermal superinsulation retrofit conducted in a typical UK building. 20 mm thick fibre-silica opaque aerogel blanket is implemented internally on the walls of a test bedroom, and the heat flux from the separating wall is measured and compared for the cases of pre and post-retrofit. The results reveal that the average amount of heat loss through the non-insulated separating wall at the post-retrofit is 5.86 W/m2, whereas it is only 0.66 W/m2 at the pre-retrofit. The results are also verified through a statistical model, which is presented for the first time in literature. The novel model is capable of providing information about potential energy loss from non-insulated walls as a function of location.
AtıfScopus60WoS54OpenAlex69İncele - MakaleAçık Erişim2016Scopus SJRQ1Effect of different processes on lamellar-free ultrafine grain formation, room temperature superplasticity and fracture mode of Zn-22Al alloy
Demirtas, M.; Purcek, G.; Yanar, H.; Zhang, Z.J.; Zhang, Z.F.
The Zn-22 wt.%Al was processed using five different selected routes including thermal, thermo-mechanical and severe plastic deformation (SPD) techniques in order to produce ultrafine grained (UFG) microstructure for achieving room temperature (RT) and high strain rate (HSR) superplasticity, and to compare the same set of the results. After all routes, the microstructural evolutions and RT uniaxial tensile tests at different strain rates ranging from 1 × 10-3 to 1 × 100 s-1 were investigated. The smallest grain size was achieved to be 300 nm after the thermo-mechanical process including conventional hot and cold rolling steps. However, the lamellar microstructure of the alloy was not completely eliminated during that process. On the other hand, equal-channel angular pressing (ECAP) as one of the SPD techniques decreased the grain size down to 400 nm with a lamellar-free microstructure. The maximum elongation value was achieved to be 330% with the sample tested at 1 × 10-3 s-1 after a thermo-mechanical process including conventional hot and cold rolling, and an aging stage between these rolling steps. It was found that lamellar-free microstructure causes higher superplastic elongation even if it has higher grain size compared to the sample having partially lamellar structure.
AtıfScopus40WoS39İncele - MakaleAçık Erişim2016Scopus SJRQ1Effects of in situ exopolysaccharide production and fermentation conditions on physicochemical, microbiological, textural and microstructural properties of Turkish-type fermented sausage (sucuk)
Dertli, Enes; Yilmaz, Mustafa Tahsin; Tatlisu, Nevruz Berna; Toker, Omer Said; Cankurt, Hasan; Sagdic, Osman
In this work, the role of in situ exopolysaccharide (EPS) production under different fermentation conditions on physicochemical, microbiological, textural and microstructural properties of sucuk was determined. For this purpose, the effect of EPS producing strains (control, strain 1, strain 2 and mixture) and fermentation conditions (fermentation temperature; 14, 16 and 18 °C and time; 8, 12 and 16 days) on physicochemical, microbiological, textural and microstructural properties were investigated using response surface methodology. In situ EPS production was observed to remarkably affect these properties while fermentation conditions were also seen to dominantly influence the physicochemical properties of sucuk, revealing that the ripening temperature appeared to be more determinant factor. EPS producing cultures enhanced the textural properties of sucuk which became harder, less adhesive and tougher. The microstructural analysis revealed the formation of web-like structure by in situ EPS production in sucuk mix during fermentation process. This study revealed the importance of in situ EPS production on final technological properties of sucuk.
AtıfScopus48WoS43OpenAlex54İncele - Derleme MakaleYalnız künye2016Scopus SJRQ1Renewable and sustainable energy saving strategies for greenhouse systems: A comprehensive review
Cuce, Erdem; Harjunowibowo, Dewanto; Cuce, Pinar Mert
In this study, a comprehensive review focusing on key strategies of energy saving and climate control technologies for greenhouses is presented. Following the brief and concise assessment of existing greenhouse systems in terms of their role in total energy consumption; cost-effective, energy-efficient and environmentally friendly technologies are analyzed in detail for potential utilization in greenhouses for notable reductions in energy consumption and emission levels. The technologies considered within the scope of this research are mainly renewable and sustainable based solutions such as photovoltaic (PV) modules, solar thermal (T) collectors, hybrid PV/T collectors and systems, phase change material (PCM) and underground based heat storage techniques, energy-efficient heat pumps, alternative facade materials for better thermal insulation and power generation (heat insulation solar glass, PV glazing, aerogel and vacuum insulation panel, polycarbonate sandwich panels), innovative ventilation technologies using pre-heating and cooling (high performance windcatchers) and efficient lighting systems. The findings from the research clearly reveal that up to 80% energy saving can be achieved through appropriate retrofit of conventional greenhouses with a payback period of 4-8 years depending on climatic conditions and crop type.
AtıfScopus354WoS302OpenAlex382İncele - MakaleAçık Erişim2015Scopus SJRQ1Comparative study of the magnetic stiffness, levitation and guidance force properties of single and multi seeded YBCOs for different HTS-PMG arrangements
Ozturk, K.; Sahin, E.; Abdioglu, M.; Kabaer, M.; Celik, S.; Yanmaz, E.; Kucukomeroglu, T.
Abstract It is crucial to improve the magnetic levitation, guidance and stiffness performances of the HTS Maglev systems for real-scale applications. In this study, the magnetic levitation force, guidance force and magnetic stiffness values were determined for single and multi-seeded YBCOs on different PMGs in ZFC regime and different cooling heights (CHs) after the magnetic flux distributions simulation of the using PMGs. Implemented study showed that the additional downward PMs make an enhancing contribution on the magnetic levitation force, guidance force and magnetic stiffness of both single and multi-seeded YBCOs. It was also determined that both the force and stiffness ratios of multi-seeded YBCO to single-seeded YBCO increase with increasing CH, indicating that the multi-seeded YBCO has much more interaction domain than single-seeded at higher gaps. It is considered that the results obtained in this study are very useful in technological applications of Maglev and bearing systems, because there is no detailed study on the magnetic stiffness, levitation and guidance force comparison to clarify electromagnetic behavior of single and multi-seeded YBCOs for different HTS-PMG arrangements.
AtıfScopus42WoS39OpenAlex40İncele - MakaleYalnız künye2015Scopus SJRQ2Some physical properties of a Si-doped nano-crystalline GaAs thin film grown by thermionic vacuum arc
Şenay, Volkan; Özen, Soner; Pat, Suat; Korkmaz, Şadan
Abstract A 160 nm thick Si-doped nano-crystalline GaAs film was grown on a glass substrate by means of the thermionic vacuum arc in just 50 s. Tools and techniques such as an optical reflectometer, Uv-Vis-NIR spectrophotometer, XRD, FESEM, AFM, Hall effect measurement, and diiodomethane, ethylene glycol, formamide, and water contact angle measurements were employed to investigate some of the physical properties of the produced film. XRD characterization indicated that the film contained GaAs (hexagonal system in atomic ratio of 1) and SiAs (monoclinic system in atomic ratio of 1) phases. The grain size obtained from Scherrer's Formula was in the range of 30-40 nm. The AFM micrographs showed the film topography, revealing a surface root mean square roughness of 14.5 nm and average height of 48.3 nm. From the wetting experiments, it was found that the contact angle value is strongly dependent on the liquid used.
AtıfScopus20WoS18OpenAlex21İncele