Yayınlar
Koleksiyondaki öğeler
- MakaleYalnız künye2018Scopus SJRQ3Drug likeness scoring and quantitative structure anaplastic lymphoma kinase (ALK) inhibitors activities relationships of pyrazolone derivatives
Ouadah, Karim; Tchouar, Noureddine; Belaidi, Salah; Oukil, Oualid; Cinar, Mehmet
Series of twenty-four compounds was the field for applying multi-parameter optimization (MPO) methods and qualitative approximations of structural activity relationships in order to determine the role of various physico-chemical and quantum descriptors used in QSAR modeling as independent variables. Anaplastic lymphoma kinase (ALK) inhibitory activity was considered as a component in this study. In order to illustrate the quantitative relationships between the molecular descriptors and the activity of pyrazolone derivatives, we have applied a multiple linear regression (MLR) procedure. By adopting cross-validation with the leave-one-out method, we could estimate the predictability of models. Our results suggest a QSAR model based on the following descriptors: S, V, LogP, POL, Ref, HOMO, LUMO, E, , HBA, PSA and NRB, for the inhibitory activities against ALK. Results show high correlation between experimental and predicted activity values, indicating the validation and the good quality of the QSAR model.
AtıfOpenAlex1
İncele - MakaleYalnız künye2019Scopus SJRQ4Appropriate maceration duration for the extraction of propolis
Ecem-Bayram, Nesrin; Gercek, Ynsuf Can
The importance of the use of natural products as nutritional supplements in order to increase the quality of life and prevent diseases has increased in recent years. Among these products, propolis produced by honey bees is collected from plants and has a very complex structure in terms of chemical content. Propolis and its extracts have been used by humans for centuries because of its various bioactive properties. Although different methods can be used in the extraction stage, the most commonly used technique is extraction by maceration. However, there is no standard time period for extraction of propolis by maceration. We aimed to determine the changes in the concentrations of flavonoid group compounds pinocembrin, chrysin, tectochrysin, pi-nostrobin chalcone, gengwanin, naringenin and galangin from propolis samples exposed to seven different periods (1, 2, 5 10, 15, 20, 30 days) of maceration using GC-MS. The flavonoids pinocembrin, chrysin, tectochrysin, and naringenin reached their maximum concentrations at the end of 15 days of maceration and a decrease in their concentrations was observed after this period. The concentrations of other flavonoids did not show a steady increase or decrease with different maceration times. As a result, it can be said that the appropriate duration of maceration to extract the flavonoids responsible for propolis' numerous activities varies depending on the origin of the propolis and the nature of the compounds to be extracted.
AtıfScopus9İncele - MakaleYalnız künye2015Scopus SJRQ2Structure'activity relationships and quantitative structure'activity relationships modeling of some 3-(aryl)-N-(aryl)-1,2,4-Oxadiazol-5-Amine derivatives as anti-proliferative agents
Belaidi, Salah; Kerassa, Aicha; Lanez, Touhami; Cinar, Mehmet
Quantitative structure activity relationship studies were performed on a series of 3-(aryl)-N-(aryl)- 1,2,4-oxadiazol-5-amines as anti-proliferative agents, multiple linear regression analysis was performed to derive quantitative structure activity relationship models which were further evaluated internally for the prediction of activity. The developed models were cross-validated by the 'leave one out' technique as well as by the calculation of statistical parameters. The best QSAR model i.e., model-2 (R2 = 0 906, Fischer's test value F = 12066) has acceptable statistical quality and predictive potential as indicated by the value of cross validated squared correlation coefficient (q2 = 0 907). The present investigation indicates the importance of the quantum chemical descriptors, constitutional descriptors and hydrophobicity to study the anti-proliferative activity.
AtıfScopus7WoS4OpenAlex2
İncele - MakaleAçık Erişim2019Scopus SJRQ3A special interpretation of the concept constant breadth for a space curve
Agirman Aydin, Tuba
The definition of curve of constant breadth in the literature is made by using tangent vectors, which are parallel and opposite directions, at opposite points of the curve. In this study, normal vectors of the curve, which are parallel and opposite directions are placed at the exit point of the concept of curve of constant breadth. In this study, on the concept of curve of constant breadth according to normal vector is worked. At the conclusion of the study, is obtained a system of linear differential equations with variable coefficients characterizing space curves of constant breadth according to normal vector. The coefficients of this system of equations are functions depend on the curvature and torsion of the curve. Then is obtained an approximate solution of this system by using the Taylor matrix collocation method. In summary, in this study, a different interpretation is made for the concept of space curve of constant breadth, the first time. Then this interpretation is used to obtain a characterization. As a result, this characterization we've obtained is solved.
- MakaleAçık Erişim2019Scopus SJRQ1A method for active seismic earth thrusts of granular backfill acting on cantilever retaining walls
Kamiloğlu, Hakan Alper; Şadoğlu, Erol
The failure mechanism plays an important role in the active seismic earth thrusts acting on cantilever retaining walls. Cantilever retaining walls can be classified as having a long heel or a short heel based on the intersection between the stem of the retaining wall and the failure surface. In the literature, different seismic earth thrust calculation methods have been suggested considering the long heel or the short heel cases. However, no unique study has been done that is applicable to walls with either a long heel or a short heel. The aim of this study is to suggest a new active seismic earth thrust calculation method for granular soils which is applicable to retaining walls with either a short heel or a long heel using a pseudo-static approach. Three different earth thrusts are considered to be acting on three different parts of a wall backface. Each thrust is derived in terms of the parameters defining the wall geometry, the soil properties and the seismic activity. The thrust coefficients are determined by maximizing the sum of the horizontal components of the earth thrusts. An algorithm is developed and coded for this aim. The results of the suggested method are compared with those of other conventional methods and an experimental study.
AtıfScopus16WoS11OpenAlex18İncele - MakaleYalnız künye2013Scopus SJRQ3Selective Separation, Preconcentration, and Determination of Au (III) Ions in Environmental Samples by Coprecipitation With a 1,2,4-Triazole Derivative
Ozdes, Duygu; Duran, Celal; Serencam, Huseyin; Şahin, Deniz
An effective, simple, lowcost, and accurate separation and preconcentration procedure which has minimal impact on the environment has been developed. It is based on the carrier element-free coprecipitation (CEFC) of Au(III)ions using N-benzyl-2-{[3-methyl-4-(2morpholine-4-ylethyl)-5-oxo-4,5-dihydro-1H-1,2, 4-triazole-1-yl] acetyl)hydrazinecarboxamide (BODAH) as an organic coprecipitant. Determination of the Au(IH) ion levels was performed by flame atomic absorption spectrometry (FAAS). The developed method provided a detection limit of 0.36 μg L-1 and the relative standard deviation for Au(III)ions was found to be 5.1%. Spike tests and certified reference material analyses were performed to validate the method. The developed method was systematically investigated in different sets of experimental parameters that influence the quantitative recovery of the Au(III)ions. Based on these investigations, the optimum conditions for the determination of Au(III) ions at trace levels were established. The coprecipitation method was applied to anodic slime, gold ore, soil, and water samples to determine their Au(III)levels.
AtıfScopus6İncele - MakaleYalnız künye2018Scopus SJRQ2Influence of coronene addition on some superconducting properties of bulk MgB2
Erdem, O.; Kirat, G.
This study reports the effect of coronene (C24H12) addition on some superconducting properties such as critical temperature (Tc), critical current density (Jc), flux pinning force density (Fp), irreversibility field (Hirr), upper critical magnetic field (Hc2), and activation energy (U0), of bulk MgB2 superconductor by means of magnetisation and magnetoresistivity measurements. Disk-shaped polycrystalline MgB2 samples with varying C24H12 contents of 0, 2, 4, 6, 8, 10 wt%, were produced at 850 °C in Ar atmosphere. The obtained results show an increase in field-Jc values at 10 and 20 K resulting from the strengthened flux pinning, and a decrease in critical temperature (Tc) because of C substitution into MgB2 lattice, with increasing amount of C24H12 powder. The Hc2(0) and Hirr(0) values are respectively found as 144, 181, 172 kOe, and 128, 161, 145 kOe for pure, 4 wt% and 10 wt% C24H12 added samples. The U0 depending on the magnetic field curves were plotted using thermally activated flux flow model. The maximum U0 values are respectively obtained as 0.20, 0.23 and 0.12 eV at 30 kOe for pure, 4 wt% and 10 wt% C24H12 added samples. As a result, the superconducting properties of bulk MgB2 at high fields was improved using C24H12, active carbon source addition, because of the presence of uniformly dispersed C particles with nanometer order of magnitude, and acting as effective pinning centres in MgB2 structure.
AtıfScopus12WoS12OpenAlex11İncele - MakaleYalnız künye2014Scopus SJRQ4Some Physicochemical Characteristics, Bioactive Content and Antioxidant Characteristics of Non-Sprayed Barberry (Berberis vulgaris L.) Fruits from Turkey; [Physikalisch-chemische Eigenschaften, bioaktive Inhaltsstoffe und antioxidative Eigenschaften von nicht mit Pflanzenschutzmitteln behandelten Früchten der Berberitze (Berberis vulgaris L.) aus der Türkei]
Yildiz, Hilal; Ercisli, Sezai; Sengul, Memnune; Topdas, Elif Feyza; Beyhan, Omer; Cakir, Ozlem; Narmanlioglu, Haluk Kemal; Orhan, Emine
Increasing consumer demands for indigenous, non-sprayed with pesticides and less-known or “forgotten” fruits necessitate knowledge on their breeding, cultivation, biochemical content, harvesting and marketing. Anatolia is rich for wild edible fruit species and barberry is abundant throughout Anatolia. The aim of this study was to determine some important physicochemical characteristics, bioactive content and antioxidant capacity of fruits from nineteen promising barberry (Berberis vulgaris L.) genotypes grown in the Coruh valley, Northeastern Anatolia. The results indicated genotype-specific differences for most of the physicochemical characteristics, antioxidant capacity and the content of some bioactive compounds. Fruit mass ranged from 0.073 (‘Coruh-7’) to 0.267 g (‘Coruh-11’). Total phenolic content ranged from 2532 (‘Coruh-’) to 3719 mg GAE per liter fruit juice (‘Coruh-11’). The genotype ‘Coruh-12’ had the highest total monomeric anthocyanin content (1004 mg per liter fruit juice) as cyanidin-3-glucoside. The highest total antioxidant capacity was observed in fruits of ‘Coruh-8’ and ‘Coruh-9’ genotypes with all three antioxidant-determining methods. We conclude that the barberry fruits represent a good source of bioactive phytochemicals because of their high phenolic and anthocyanin contents.
AtıfScopus34WoS26OpenAlex36İncele - MakaleAçık Erişim2015Scopus SJRQ2Analysis of continuous and discontinuous cases of a contact problem using analytical method and FEM
Birinci, Ahmet; Adıyaman, Gökhan; Yaylacı, Murat; Öner, Erdal
In this paper, continuous and discontinuous cases of a contact problem for two elastic layers supported by a Winkler foundation are analyzed using both analytical method and finite element method. In the analyses, it is assumed that all surfaces are frictionless, and only compressive normal tractions can be transmitted through the contact areas. Moreover, body forces are taken into consideration only for layers. Firstly, the problem is solved analytically using theory of elasticity and integral transform techniques. Then, the finite element analysis of the problem is carried out using ANSYS software program. Initial separation distances between layers for continuous contact case and the size of the separation areas for discontinuous contact case are obtained for various dimensionless quantities using both solutions. In addition, the normalized contact pressure distributions are calculated for both cases. The analytic results are verified by comparison with finite element results. Finally, conclusions are presented.
AtıfScopus38WoS39OpenAlex36İncele - MakaleAçık Erişim2017Scopus SJRQ2Edible packaging film derived from mechanically deboned chicken meat proteins: Effect of transglutaminase on physicochemical properties
Yayli, Damla; Turhan, Sadettin; Saricaoglu, Furkan Turker
In this study, effect of transglutaminase (TGase) addition on physical, water barrier, optical and mechanical properties of mechanically deboned chicken meat protein (MDCM-P) films was investigated. When TGase was added to the films, the thickness increased, but the solubility decreased. Films treated with TGase exhibited higher water vapor permeability than control film (p<0.05). When TGase concentration increased, the L∗ values of films decreased, but a∗ and b∗ values increased. All films showed very good barrier properties against UV light. The highest tensile strength was obtained in MDCM-P films containing 3% TGase (p<0.05). The elongation at break values increased with the TGase concentration increasing from 1 to 3%, but decreased at higher enzyme concentration (p<0.05). The addition of TGase altered molecular organization and intermolecular interaction in the film matrix. TGase treated films showed smoother and ordered surface structure and homogeneous and compact microstructure. The results indicated that TGase use can be an effective approach in improving the solubility and mechanical properties of MDCM-P films.
AtıfScopus28WoS25OpenAlex33
İncele - MakaleYalnız künye2019Scopus SJRQ3Physicochemical and palynological characterization of the onobrychis miller (fabaceae) honey
Ozenirler, Cigdem; Gencay Celemli, Omur; Ecem Bayram, Nesrin; Dikmen, Fatih; Zare, Golshan; Celikbicak, Omur; Sorkun, Kadriye
The purpose of this study was to contribute toward characterizing the general properties of the Onobrychis Miller (sainfoin) honey.We analyzed 21 samples of Onobrychis honeys, which were collected in 2013, from Northeast Anatolia according to their microscopic and physicochemical features (fructose/glucose (F/G) ratio, 5-(hydroxymethyl) furan-2-carbaldehyde (HMF) value, and volatile compounds). The relationships were examined between these variables with statistical methods such as principal component, regression, and correlation analyses. Statistical analyses revealed certain correlation patterns between several parameters. Onobrychis radiata (Desf.) M. Bieb., O. tournefortii (Willd.) Desv., O. oxyodonta Boiss. and Onobrychis spp. pollens were identified.TPN-10 ranged from 6532 to 481157 while the HMF values were between 0.1-7.5 mg/kg and F/G ratios were between 0.8-1.3. Alcohols, aldehydes, aliphatic acids and their esters, carboxylic acids and their esters, hydrocarbons, flavonoids, ketones, sugars and vitamins were identified in the honey samples within ranges of 0-11.95%, 0-16.76%, 0-24.72%, 0-1.86%, 0-14.71%, 2.74-7.09%, 0-27.02%, 5.12-51.39%, and 0-21.36%, respectively.Although it was not significant, a positive correlation between flavonoids and Onobrychis pollen number was calculated via correlation analysis. There was no meaningful correlation between Onobrychis pollen number and other parameters. Although a negative trend between flavonoids and sugars was observed, it was not significant. F/G ratio was found to be positively correlated with sugars, HMF, and TPN-10 of which the latter two parameters had significant values. Furthermore, a significant positive correlation between TPN-10 and HMF was also detected.
AtıfScopus3İncele - MakaleAçık Erişim2013Scopus SJRQ1Damages on reinforced concrete buildings due to consecutive earthquakes in Van
Ates, Sevket; Kahya, Volkan; Yurdakul, Muhammet; Adanur, Suleyman
Consecutive earthquakes occurred on October 23rd, 2011 in Ercis and on November 9th, 2011 in Edremit that are townships located 90. km and 18. km far from Van city in Turkey, respectively. A total of 28,000 buildings were damaged or collapsed in the city center and the surrounding villages after the Ercis earthquake. This number reached 35,000 after the Edremit earthquake. In the area where the earthquakes occurred, almost all the reinforced concrete buildings were affected.This study presents field observations of damages on reinforced concrete buildings due to the consecutive earthquakes that occurred in Van, Turkey. Damages appearing in the buildings may occur due to several reasons such as site effect, poor construction quality, poor concrete strength, poor detailing in beam-column joints, detailing of stronger beam than column, soft stories, weak stories, inadequate reinforcement, short lap splices, incorrect end hook angle, and short columns. Aftershocks also caused progressive damages on the buildings within 17 days after the earthquakes. According to the results of this study, most of the damaged buildings were not designed and constructed according to the Turkish earthquake code, the so-called Specification for Buildings to be built in Seismic Zones.
AtıfScopus84WoS74OpenAlex92İncele - MakaleAçık Erişim2018Scopus SJRQ2Active control of a small-scalewind turbine blade containing magnetorheological fluid
Bolat, Fevzi Cakmak; Sivrioglu, Selim
This research study proposes a new active control structure to suppress vibrations of a small-scale wind turbine blade filled with magnetorheological (MR) fluid and actuated by an electromagnet. The aluminum blade structure is manufactured using the SH3055 (BergeyWindpower Co. Inc., Norman, OK, USA) code numbered airfoil which is designed for use on small wind turbines. A dynamic interaction model between the MR fluid and the electromagnetic actuator is constructed to obtain a force relation. A detailed characterization study is presented for the proposed actuator to understand the nonlinear behavior of the electromagnetic force. A norm based multi-objective H2/H∞ controller is designed using the model of the elastic blade element. The H2/H∞ controller is experimentally implemented under the impact and steady state aerodynamic load conditions. The results of experiments show that the MR fluid- electromagnetic actuator is effective for suppressing vibrations of the blade structure.
AtıfScopus23WoS22OpenAlex22İncele - MakaleYalnız künye2017Scopus SJRQ4Structural investigation, drug likeness scoring and structure activity/property relationships applied on 1,2,3-thiadiazole derivatives, with kinase inhibitors activity
Oukil, Oualid; Tchouar, Noureddine; Belaidi, Salah; Salah, Toufik; Cinar, Mehmet
All calculations and the equilibrium geometries of 1,2,3-thiadiazole have been performed using ab initio/HF, MP2 and DFT methods with different basis sets. The molecular electrostatic potential surface (MESP) that reveals centers of reactivity of the molecule and substitution effects of the molecular system have been studied using the HSAB principle (Hard Soft Acid and Base). Also, the multi-parameter optimization (MPO) methods and structure activity/property relationship studies were carried out on twenty-one molecules of 1,2,3-thiadiazole derivatives which are potent VEGFR-2/KDR kinase inhibitors. In the present work results such as net charges, bond lengths, dipole moments, QSAR properties, Lipinski’s parameters, Lipophilic Efficiency (LipE), have been calculated and discussed. (Figure Presented).
AtıfScopus7İncele - MakaleYalnız künye2016Scopus SJRQ2Morphology, composition, structure and optical properties of CuO/Cu2O thin films prepared by RF sputtering method
Korkmaz, Şadan; Geçici, Birol; Korkmaz, S. Deniz; Mohammadigharehbagh, Reza; Pat, Suat; Özen, Soner; Şenay, Volkan; Yudar, Hafizittin Hakan
In this paper, copper oxide (CuO/Cu2O) nanocrystalline thin films were deposited by radio frequency (RF) magnetron sputtering system at 75 W and 100 W. The surface, optical, composition and structural properties of obtaining samples were characterized by using atomic force microscopy (AFM), UV–Vis spectrophotometer, field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). The optical band gaps of produced films were calculated as 2.05 eV and 1.83 eV for 75 W and 100 W. The layer's thicknesses were measured as 20 nm and 50 nm using a Filmetrics F20. FESEM images of the samples prove the AFM images change and also show homogeneity of thin films and variation relative to power change, thus revealed the surface of samples disturb in homogen mode. EDX results denote presence of Cu and O elements inside the deposited samples.
AtıfScopus56WoS52OpenAlex56İncele - MakaleAçık Erişim2019Melissopalynology analysis, physicochemical properties, multi-element content and antimicrobial activity of honey samples collected from Bayburt, Turkey; [Türkiye'nin Bayburt Ilinden Toplanan Bal Örneklerinin Melissopalinolojik Analizi, Fizikokimyasal Özellikleri, Multi-Element Içerigi ve Antimikrobiyal Aktivitesi]
Ecem Bayram, Nesrin; Yüzer, Mustafa Onur; Bayram, Sinan
The aim of this study was to determine the plant sources, physicochemical properties, element content and antimicrobial effects of honey samples collected from 10 different regions of the province of Bayburt, Turkey. The melissopalynological analysis showed that the pollen samples of 67 plant taxa belonged to 34 plant families in honey samples and were found with different rates and TPN-10 values was found between 16024 and 90126. In addition to these, the amount of ash was between 0.13% and 0.32%, the electrical conductivity value was between 0.36 and 0.69 mS/cm, the moisture content was between 16.1% and 18.9% and the fructose/glucose ratio was between 0.92 and 1.18. As a result of physicochemical analysis, it was determined that the data obtained were in compliance with the standard values defined in by the Turkish Food Codex Communiqué on Honey (No: 2012/58). Elemental analysis performed with ICP-MS showed that the K element was the highest (261.34-1863.05 mg/kg) in all honey samples in total among the 42 elements. In addition to these, the antimicrobial effects of honey samples and minimum inhibition concentration values (MIC) were determined by the agar well diffusion (AWD) method and and microbroth dilution method respectively.
AtıfScopus11OpenAlex12TR Dizin7
İncele - MakaleYalnız künye2018Scopus SJRQ4Examination of main trends in geographical education research in Turkey
Değirmenci, Yavuz
The main purpose of the present study is to examine the main tendencies of the articles published in the field of geography education between the years of 2008 and 2018 in Turkey. Within the scope of this purpose, this study examined the subject fields, research methods, data collection tools, data analysis techniques and sampling methods used in the geography education studies in the journals scanned by the SSCI, ESCI and ULAKBIM social sciences databases in Turkey. The study used the document analysis method, one of the qualitative research methods. The study evaluated 224 articles determined according to the purposeful sampling method from the related databases by using the Geography Education Article Classification Form (GEACF) and then analyzed the obtained pieces of data by using the content analysis method and finally made some interpretations. According to the findings of the study, in the last ten years in Turkey, the highest number of articles were published in 2010 (n=33) and the lowest number of articles were published in 2017 (n=13). It was also observed that, in the field of geography education, the highest number of articles were published in the Marmara Geography Journal; however, in the journals scanned in SSCI, a total of (n=17) articles were published in the last ten years. Moreover, the studies were also determined to show more interest in the subject areas of teacher training and learning/teaching; questionnaires and scales were generally used as a data collection tool; the frequency/percentage and content analysis methods were preferred in the analysis of data; quantitative and qualitative methods were generally used in studies on geography education; on the contrary, mixed methods were less frequently used.
- MakaleAçık Erişim2019Scopus SJRQ2Experimental Study of Hydrogen Addition on Waste Cooking Oil Biodiesel-Diesel-Butanol Fuel Blends in a DI Diesel Engine
Sarıkoç, Selçuk; Ünalan, Sebahattin; Örs, İlker
In this study, the effects of hydrogen addition on diesel-biodiesel-butanol fuel blends were investigated in terms of engine performance, combustion, and emission characteristics under different engine operating conditions. The experiments were performed with eight different fuel blends at a constant engine speed of 2000 rpm, which is the maximum torque value of all test fuels. The four operating conditions were at 25%, 50%, 75%, and 100% engine loads. Hydrogen was delivered to diesel-biodiesel-butanol fuel blends through the intake manifold with different rates of fuel mass consumption. The experiment results were compared with euro diesel and absence of hydrogen addition for all test fuels. The experimental results have revealed that at 2000 rpm engine speed, the brake torque, in-cylinder pressure, and exhaust gas temperature increased with the addition of hydrogen. Nevertheless, the brake-specific fuel consumption, carbon monoxide (CO), carbon dioxide (CO2), hydrocarbon (HC), nitrogen oxides (NOx), and smoke opacity emissions decreased under various engine conditions. The heat release rate was generally shown to be decreased with higher engine loads and increased with lower engine load conditions, while a rise in thermal efficiency was observed. Therefore, the addition of hydrogen in a diesel engine usually exhibited fewer emissions, improved the combustion process, and increased the brake torques of the engine by comparison to the absence of hydrogen addition.
AtıfScopus54WoS43OpenAlex54İncele - MakaleYalnız künye2019Scopus SJRQ2Strategies for ideal indoor environments towards low/zero carbon buildings through a biomimetic approach
Cuce, Erdem; Nachan, Zaid; Cuce, Pinar Mert; Sher, Farooq; Neighbour, Gareth B.
Biomimicry is a relatively new discipline of applied science that seeks inspiration from natural systems for innovative solutions to human problems. Taking nature as ‘model, mentor and measure’ receives wide acceptance in the field of architecture but predominantly in conceptualising novel forms. The biomimicry concept is comprehensively analysed for its ability to provide more sustainable and possibly even regenerative built environments. As part of this study, first, various frameworks for approaching ‘biomimicry’ in general are discussed and then relevant examples pertaining to architecture are evaluated. Case studies are critiqued with respect to varied levels of sustainability achieved and its causative factors. In the second part, an approach model for ‘biomimetic architecture’ in the context of Mumbai is presented and applicable strategies based on climatic adaptation are suggested using local biodiversity as a library of organisms. The generic example of ‘human skin’ addressing the same adaptation is analysed and complemented by a state-of-the-art case study on similar lines. The results achieved clearly reveal that biomimicry is a successful approach to design and operate the sustainable built environments for the buildings of the future.
AtıfScopus56WoS52OpenAlex56İncele - MakaleYalnız künye2018Scopus SJRQ2Optimum weight design of steel space frames with semi-rigid connections using harmony search and genetic algorithms
Artar, Musa; Daloğlu, Ayşe T.
In this paper, an optimization process using MATLAB-SAP2000 Open Application Programming Interface (OAPI) is presented for optimum design of space frames with semi-rigid connections. A specified list including W-profiles taken from American Institute of Steel Construction (AISC) is used in the selection of suitable sections. The stress constraints as indicated in load and resistance factor design of AISC, lateral displacement constraints being the top- and inter-storey drift and geometric constraints are considered in the optimization process. Genetic algorithm method based on biological principles and harmony search algorithm method based on the processes of musical harmony are used for optimum designs. Two different space frames are solved for the cases of rigid and semi-rigid connections, separately. A computer program is coded in MATLAB for the purpose interacting with SAP2000 OAPI. Results obtained from the analyses show that type of semi-rigid connections plays a crucial role in the optimization of steel space frames and increases the optimum weight.
AtıfScopus23WoS17OpenAlex30İncele
