Sürdürülebilir Kalkınma Amaçları
Bu dergideki yayınlar
4 →- MakaleAçık Erişim2020Sürekli Kalite İyileştirme için Faktöriyel Tasarım Tabanlı Süreç Optimizasyonu
Serencam, Hüseyın; Uçurum, Metin; Özdemir, Akın
Deneyin tasarımı, yeni bir süreç geliştirmek veya mevcut bir süreci geliştirmek için kilit bir rol oynar. Literatürde sürekli kalite iyileştirme için faktöriyel deneysel tasarımları kullanılmıştır. Bu makalede, tasarım faktörlerinin optimizasyonu için bir deney verisi analizi yapmak amacıyla faktöriyel deney tasarımına sahip yeni bir yöntem sunulmaktadır. Önerilen yöntem beş ana adıma sahiptir. İlk adım deney öncesi planlama ile ilgilidir. İkinci adım faktöriyel tasarıma sahip deneysel aşamadır. Üçüncü adım bir deneye ait verileri analiz eder. Daha sonra, tasarım faktörlerinin en uygun değerlerini elde etmek için faktöriyel tasarıma dayalı optimizasyon modeli ilk defa geliştirilmiştir. Son adım deneyden elde edilen sonuçları doğrulamak için sonuçlar ve tavsiyeler adımdır. Son olarak, güncel literatürdeki sayısal bir örnek için farklı hedef değerler kullanılarak karşılaştırma çalışmaları yapılmıştır. Ayrıca, önerilen faktöriyel tasarıma dayalı süreç optimizasyon modelinin belirtilen hedef değere göre daha fazla varyansı azaltabileceği sonucuna varılmıştır.
- MakaleAçık Erişim2020An Experimental Study to Determine the Relationship Between Power Factor and Harmonic Distortion in Single-Phase AC Voltage Controller
Çorapsız, Muhammed Reşit; Kahveci, Hakan; Çorapsız, Muhammed Fatih
This paper deals with the determination of the relationship between the power factor and the harmonic distortion in a single-phase AC (SPAC) voltage controller. The aim of this study is to investigate the change of power factor (PF) and total harmonic distortion (THD) during different phase triggering angles (PTA). Firstly, the advantages of using thyristor instead of triac in single-phase AC voltage controllers operating at high frequencies are mentioned. Secondly, the power factor and total harmonic distortions for single-phase AC voltage controllers are theoretically examined. Finally, the relationship between power factor and total harmonic distortion are demonstrated by both simulation and experimental studies. However, it is monitored that, at lower output voltages, the power factor (PF) is pretty much reduced and total harmonic distortion (THD) is significantly increased.
- MakaleAçık Erişim2020Seed Fatty Acid Composition of Kalecik Karası Grape (Vitis vinifera L.) Cultivated in Çorum Province Ecological Conditions
Gıdık, Betül
It is stated that grape seed contains about 10-20% oil. Unsaturated fatty acids such as linoleic and oleic acid, especially with the high rate of antioxidants, show that grape seed oil should be processed as a by-product and its economic importance. In addition, it is used in cosmetic and pharmaceutical industry with the antioxidant substances it contains. In this study, the fatty acids composition of Kalecik Karası seed oil grown in Çorum ecology was determined by using GS-MS. Linoleic acid and linolenic acid values were found 0.91% and 0.21%, respectively. In addition the butyric acid content was determined as 50.83%. Butyric acid is one of the important fatty acids that can be used in nutrition because of its inhibitory and curative effect in intestinal diseases. It is thought that it will be possible to determine the usage areas of vegetable oils by illuminating the fatty acids content and thus the production methods can be grouped. The grape kernels, which are produced as a by-product from pressed or processed grapes used as raw materials for the first product such as fruit juice, molasses and wine, reveal the idea that grape seed oil can be used in the production of grape seed oil which has a higher economic yield in addition to pulp and feed production. The fatty acids it contains indicate that grape seed oil is suitable for use as edible oil.
- MakaleAçık Erişim2019Güneş Panellerinde Cuk Dönüştürücü Tabanlı Değişken Şartlar Altında D&G, BM ve YSA Algoritmalarının Karşılaştırmalı Performans Analizi
Güngör, Okan
Güneş enerjisinden elektrik üretmekte kullanılan PV panellerin verim artırma çalışmaları devametmektedir. Verimi etkileyen unsurların başında MGNT algoritmaları gelmektedir. Bu çalışmada sezgisel(BM, YSA) ve D&G tabanlı MGNT algoritmaları incelenmiştir. Sezgisel algoritmaların uygulanabilmesi içinCuk dönüştürücüye ait denetleç tasarımı Matlab aracılığıyla yapılmıştır. Yapılan benzetim çalışmaları sonucunda, üçfarklı MGNT algoritmasının performans analizleri gösterilmişti
AtıfOpenAlex2TR Dizin1
İncele
Tam Kayıt
| Alan | Değer | Dil |
|---|---|---|
| creativeworkseries.issn | 2458-7575 | |
| dc.date.accessioned | 2026-10-29T19:19:32.970935729Z | |
| dc.date.available | 2026-10-29T19:19:32.970935729Z | |
| dc.identifier.uri | https://rdlopen.rawdatalibrary.net/r/bayburt/14549 | |
| dc.rights | info:eu-repo/semantics/openAccess | |
| dc.title | Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi |



