Sürdürülebilir Kalkınma Amaçları
Yazarlar
Yayınlar
- MakaleAçık Erişim2025Scopus SJRQ3A review and classification of conventional, advanced, smart and multifunctional glazing technologies for low-carbon building applications
Cuce, Pinar Mert; Guclu, Tamer; Cuce, Erdem
In this study, various smart window technologies are introduced, examined in terms of energy efficiency, and their advantages over existing conventional windows are presented. Smart window technologies used today are more energy efficient than traditional single and double-glazing windows. It is possible to achieve up to 80% energy savings in building heating/cooling costs compared to traditional window technologies, with a correctly selected and applied smart window technology depending on various external factors such as building facade, climatic conditions and window area. Therefore, smart windows technologies play a leading role in the realisation of nearly/zero energy building goals.
AtıfScopus1WoS1OpenAlex1
İncele - MakaleYalnız künye2017Scopus SJRQ1Role of airtightness in energy loss from windows: Experimental results from in-situ tests
Cuce, Erdem
The rate of air leakage related energy loss from glazed areas is unequivocal especially in older and poorly installed windows. Therefore, in this research, a comprehensive experimental investigation is done to analyse the importance of air leakage on overall heat transfer coefficient (U-value) of conventional air filled double glazed windows. The tests are conducted in a typical UK dwelling of Nottingham fitted with traditional air filled double glazed windows. One sash of the test window is sealed internally with a special transparent cover to provide excellent airtightness whereas the second window sash is left as it is to represent the ordinary case. The experiments are conducted in April 2016, and dynamic co-heating test methodology is applied to evaluate the rate of enhancement in the U-value of airtight window sash. The results indicate that the airtight window sash has a notably lower U-value compared to the ordinary window sash due to the impact of airtightness and reverse heat flux during noon time owing to the greenhouse effect between transparent cover and internal glazing. The overall U-value of ordinary window sash is found to be 2.67 W/m2K, whereas it is 1.79 W/m2K for airtight window sash. It is observed that about 33% of reduction in heat losses can be achieved via airtight windows.
AtıfScopus60WoS59OpenAlex75İncele - MakaleYalnız künye2017Scopus SJRQ2Solar Pond Window Technology for Energy-Efficient Retrofitting of Buildings: An Experimental and Numerical Investigation
Cuce, Erdem; Cuce, Pinar Mert
Windows are responsible for an important proportion of heat loss from building envelope due to inadequate insulative characteristics of traditional glazing products. In this respect, advanced glazing solutions are of vital importance to mitigate energy demand of buildings, thus to reduce carbon emissions. Therefore, in this research, a novel glazing technology called solar pond window is introduced, and it is numerically and experimentally investigated for different design configurations. The optimum design of this novel glazing covers four 5-mm-thick glass panes, two 20-mm-thick water layers, and one 20-mm-thick Krypton layer in the middle. The average heat transfer coefficient (U-value) of the optimum case is found to be about 0.40 W/m 2 K. If air is used as insulative gas in the interlayer, the U-value of the glazing is determined to be around 0.90 W/m 2 K, which is still competitive with the U-value range of argon-filled triple-glazed windows with low-e coatings. The fabrication cost of the optimum design of solar pond window is around €120/m 2. Overall, solar pond window technology is a cost-effective and energy-efficient glazing, which has a great potential to be the future of fenestration products as well as being capable of meeting the latest building fabric standards.
AtıfScopus10WoS7OpenAlex9İncele - MakaleAçık Erişim2016Scopus SJRQ1Novel glazing technologies to mitigate energy consumption in low-carbon buildings: A comparative experimental investigation
Cuce, Erdem; Cuce, Pinar Mert; Riffat, Saffa
Buildings play a key role in total world energy consumption as a consequence of poor thermal insulation characteristics of facade materials. Among the elements of a typical building envelope, windows are responsible for the greatest energy loss because of their notably high overall heat transfer coefficients. About 60% of heat loss through the building fabric can be attributed to the glazed areas. In this respect, novel cost-effective glazing technologies are needed to mitigate energy consumption, and thus to achieve the latest targets toward low/zero carbon buildings. Therefore in this study, three unique glazing products called vacuum tube window, heat insulation solar glass and solar pond window which have recently been developed at the University of Nottingham are introduced, and thermal performance analysis of each glazing technology is done through a comparative experimental investigation for the first time in literature. Standardized co-heating test methodology is performed, and overall heat transfer coefficient (U-value) is determined for each glazing product following the tests carried out in a calibrated environmental chamber. The research essentially aims at developing cost-effective solutions to mitigate energy consumption because of windows. The results indicate that each glazing technology provides very promising U-values which are incomparable with conventional commercial glazing products. Among the samples tested, the lowest U-value is obtained from the vacuum tube window by 0.40W/m2K, which corresponds to five times better thermal insulation ability compared to standard air filled double glazed windows.
AtıfScopus35WoS33OpenAlex37İncele - Derleme MakaleYalnız künye2016Scopus SJRQ1Vacuum glazing for highly insulating windows: Recent developments and future prospects
Cuce, Erdem; Cuce, Pinar Mert
A comprehensive review of vacuum glazing technology from state-of-the-art developments to future prospects has been presented. The review has been conducted in a thematic way in order to allow an easier comparison, discussion and evaluation of the findings. First, a thorough overview of historical development of vacuum glazing has been given. Then, numerous experimental, theoretical, numerical and simulation works on the scope have been evaluated and the characteristic results from the said works have been analyzed. Commercial vacuum glazing products in market have been assessed in terms of several performance parameters such as overall heat transfer coefficient, visible light transmittance, solar heat gain coefficient and cost. Techno-economic and environmental aspects of vacuum glazing technology have also been discussed. It can be concluded from the results that overall heat transfer coefficient of a vacuum glazing can be reduced up to 0.20 W/m2K through optimized integrations with low-e coatings. The incomparable U-value range of vacuum glazing enables significant mitigation in energy consumption levels and greenhouse gas emissions. Retrofitting 25.6 million homes in the UK with vacuum glazing can provide a carbon abatement of about 40 million tonnes a year, which is very promising.
AtıfScopus138WoS117OpenAlex148İncele - MakaleAçık Erişim2015Scopus SJRQ3Experimental and numerical investigation of a novel energy-efficient vacuum glazing technology for low-carbon buildings
Cuce, Erdem
In this study, a recently developed innovative window technology called vacuum tube window is introduced, and its performance assessment is presented through an experimental and numerical research. The novel design of vacuum tube window consists of evacuated tubes surrounded by Argon as inert gas to eliminate conductive and convective effects inside the window and thus to produce a building element with remarkably low overall heat transfer coefficient (U-value). Heat transfer inside the window was modelled via a reliable commercial computational fluid dynamics software ANSYS FLUENT. The accuracy of simulations was verified by environmental chamber tests. For the vacuum tube diameter of 28 mm, an excellent agreement between experimental and numerical data was achieved. For different values of design parameters such as pane thickness, tube thickness, tube diameter and Argon gap, total heat loss and U-value of the vacuum tube window and optimum data were evaluated. Optimum tube diameter was found to be 60 mm in terms of thermal performance characteristics, cost, lightness and aesthetic issues. It is concluded that the vacuum tube window is able to provide a U-value lower than 0.40 W/m2K, which is very promising for both retrofitting of existing buildings and new-build applications.
AtıfScopus16WoS11OpenAlex18İncele