Sürdürülebilir Kalkınma Amaçları
Yazarlar
Yayınlar
- MakaleYalnız künye2024Scopus SJRQ1Effect of oxidation on radiation shielding capacity of ZrNbTaMoW Refractory High Entropy Alloys (RHEA) for nuclear reactor applications: Experimental and theoretical assessment
Sakar, E.; Guler, O.; Alim, B.; Guler, S.H.; Dikici, B.; Lampke, T.
This study presents the production and comprehensive assessment of a Refractory High Entropy Alloy (RHEA) with a ZrNbTaMoW composition for possible usage nuclear reactor applications. The alloy was synthesized using the mechanical alloying (MA) method, and its radiation properties were examined. Elemental powders of Zr, Nb, Ta, Mo, and W were utilized in equimolar quantities during the 120-hour MA process, conducted under a high-purity Ar atmosphere to prevent oxidation. The obtained HEA was then subjected to a mechano-thermal process to transform it into Refractory High-Entropy Oxide (RHEO) for comparing their radiation-shielding performance under oxide conditions. The characterization of the produced alloys through X-ray diffraction (XRD), scanning electron microscopy (SEM), and electron dispersive spectroscopy (EDS). The photon shielding parameters of the alloys were experimentally obtained for various energies emitted from a 133Ba radioactive source, employing a Canberra UltraLEGe semiconductor detector. Furthermore, theoretical calculations were performed to validate the experimental data and to evaluate the alloys' photon shielding capabilities comprehensively. For this purpose, Phy-X/PSD software was employed to determine mass attenuation coefficients, half-value layer, effective atomic number, and effective electron density. Fast neutron absorption capabilities were determined through the calculation of average absorption cross-sections in the 2–12 MeV energy range. The results showed that the oxidation process significantly diminished the photon absorption capacity of RHEA.
AtıfScopus34WoS33OpenAlex37
İncele - MakaleAçık Erişim2023Scopus SJRQ1A comprehensive study on structural properties, photon and particle attenuation competence of CoNiFeCr-Ti/Al high entropy alloys (HEAs)
Sakar, Erdem; Guler, Omer; Alım, Bünyamin; Say, Yakup; Dikici, Burak
It is well known that high entropy alloys (HEAs) have a wide range of potential applications as radiation shielding due to their superior properties. The CoNiFeCr-Ti/Al compositions were chosen for their low cost as HEA in this study. The HEAs were successfully produced using the mechanical alloying (MA) method with equimolar CoNiFeCr, CoNiFeCrAl, and CoNiFeCrTi compositions. The production and structural properties of the alloys were investigated in detail. Besides, the photon and particle radiation shielding properties of the HEAs were calculated with the help of Phy-X/PSD, SRIM (10 keV-20 MeV), and ESTAR (10 keV-20 MeV) programs. The photon-matter interaction parameters were calculated in both specific photon energies emitted from 241Am, 133Ba, 109Cd, 60Co, 137Cs, 131I, and 22Na nuclides and a continuous energy range of 15 keV-15 MeV. The characterization of the alloys was investigated by using X-ray diffraction (XRD) and scanning electron microscopes (SEM) attached to an energy dispersive spectroscopy (EDX). It was found that the HEAs have a highly amorphous structure due to the selected production method. The crystal size of the alloys was calculated as 70, 35, and 20 nm for CoNiFeCr, CoNiFeCrAl, and CoNiFeCrTi, respectively. In terms of shielding properties, it has been determined that the produced HEAs have better shielding characteristics for photon and particle radiations than standard shielding concretes. In addition, the results demonstrated that CoNiFeCr alloy, which has the best shielding ability among the HEA alloys, can be used as a shielding material application requiring photon, electron, proton, alpha, and neutron radiations.
AtıfScopus30WoS32OpenAlex32İncele - MakaleAçık Erişim2023Scopus SJRQ1An extensive survey on radiation protection features of novel hafnium iron-borophosphate glasses: Experimental and theoretical study
Şakar, Erdem; Alım, Bünyamin; Ertap, Hüseyin; Karabulut, Mevlut
This study aimed to determine the radiation (photon and particle) attenuation abilities of Hf added iron-borophosphate glasses considered as a candidate host matrix for Pu containing nuclear waste. Experimental absorption parameters were measured using 133Ba radionuclide for photon radiation, and the same parameters were theoretically calculated using Phy-X/PSD. The obtained data were evaluated comparatively for all glasses depending on the Hf and B contents. It has been determined that all of the glasses examined have photon absorption ability at a level that can be a shielding material for nuclear applications. In addition, the interaction cross-sections with particle radiations were computed using SRIM and ESTAR software. When the data obtained are evaluated thoroughly, it can be said that investigated glasses can be used as shielding in areas that require protection from both photon and particle radiation, in addition to being a candidate material for the vitrification of nuclear wastes containing Pu.
AtıfScopus5WoS6OpenAlex8İncele - MakaleYayıncıda açık erişim2022Scopus SJRQ2Evaluation of photon interaction parameters of Anti-HIV drugs
Akbaba, Uğur; Şakar, Erdem; Abu Al-Sayyed, Mohammed Ibrahim; Alim, Bünyamin; Özpolat, Özgür Fırat
Medical treatment inevitably exposes individuals to radiation, including those taking drugs used to treat and prevent human immunodeficiency virus (HIV). Motivated by this, we investigated the radiation interaction properties of several HIV drugs to determine the interaction parameters, mass attenuation coefficient (MAC), atomic cross section (ACS), electronic cross section (ECS), effective atomic numbers (Zeff), and effective electron density (Neff). We calculated the values using the Phy-X/PSD software in the range of 0.015–15 MeV. Additionally, we calculated the exposure build-up factor (EBF), and energy absorption build-up factor (EABF) values of the drugs up to 40 mean free path (MFP) using the geometric progression (G-P) method. From our findings, we determined that Combivir, with its relatively high heavy element content, had the highest radiation attenuation capacity, whereas the probability of Lopinavir interacting with photons was the lowest compared with the other drugs. The results of the EBF and EABF parameters, including the scattering effects, ordered the drugs opposite to the primary interaction parameters such as MAC, ACS, ECS, and Zeff. These findings can guide the treatment process of HIV-positive patients and inform HIV prevention practices conducted alongside radiotherapy, as the interaction between radiation and a drug may cause deterioration in the drug's structure.
AtıfScopus9WoS8OpenAlex12İncele