Yazarlar
Yayınlar
- MakaleYalnız künye2022Scopus SJRQ1Feasible Extraction Method for Electromagnetic Properties of Multilayer Metamaterials With Short-Circuit Termination
Hasar, Ugur Cem; Ozturk, Gokhan; Kaya, Yunus; Bute, Musa; Karaaslan, Muharrem; Barroso, Joaquim J.; Ramahi, Omar M.; Ertugrul, Mehmet
An extraction technique is proposed for electromagnetic characterization of metal-backed multilayer metamaterial (MM) structures demonstrating reflection-asymmetric property. It uses recursive scattering parameters for direct and reversed configurations of a multilayer structure. The algorithm was validated by comparing the extracted electromagnetic properties of multilayer structures composed of different MM unit cells with those determined by one-layer-only S-parameter methods. Two-layer and three-layer multilayer structures composed of MM slabs with C-shaped and Omega-shaped rings and an FR4 material were fabricated and measured for experimental validation. A sensitivity analysis was also conducted to quantitatively evaluate the performance of our method against a small air gap between the multilayer structures and the short-circuit termination and between adjacent MM slabs within these structures. Strong agreement was observed between the resulted obtained using our method and measurements.
AtıfScopus10WoS10OpenAlex10
İncele - MakaleAçık Erişim2021Scopus SJRQ1Coupling analysis between resonating metamaterial slabs using scattering parameters
Hasar, Ugur Cem; Kaya, Yunus; Izginli, Mucahit; Ozturk, Hamdullah; Ertugrul, Mehmet; Ramahi, Omar M.
Metamaterial (MM) slabs in close proximity can couple with one another. This coupling can modify the electromagnetic response of the overall MM structure involving individual MM resonators. The signal flow graph technique along with the ABCD parameters are applied to quantitatively and qualitatively examine this coupling from simulated/measured scattering parameters of cascade connection of closely or largely separated MM slabs. S-parameter measurements of a MM slab constructed by split-ring-resonators were carried out at X-band (8.2-12.4 GHz) to validate our theoretical analysis.
AtıfScopus2WoS2OpenAlex2İncele - MakaleAçık Erişim2015Scopus SJRQ1Investigation of transmitted, reflected, and absorbed powers of periodic and aperiodic multilayered structures composed of bi-anisotropic metamaterial slab and conventional material
Hasar, Ugur Cem; Barroso, Joaquim José; Kaya, Yunus; Karacali, Tehvit; Ertugrul, Mehmet
In this study, we investigate transmitted, reflected, and absorbed powers in forward and backward directions of periodic and aperiodic multilayered structures composed of bi-anisotropic metamaterial (MM) slab and conventional material. Aperiodic multilayered structure is realized by a change in thickness of any bi-anisotropic MM slab or of any conventional material. From this analysis, we note the following key results. First, identical (non-identical) forward and backward transmitted (reflected and absorbed) powers are observed for the analyzed periodic and aperiodic multilayered structures due to reciprocity (reflection-asymmetry) of bi-anisotropic MM slabs. Second, thickness-resonance phenomenon of conventional materials produces some peaks in the transmitted powers of periodic multilayered structures aside from the resonance frequency region of bi-anisotropic MM slabs. Third, each thickness-resonance frequency splits into many frequencies upon increasing the number of sections of periodic multilayered structures (no splitting when number of periods is one). Fourth, while the effect of changing the thickness of any bi-anisotropic MM slab within the aperiodic multilayered structure has no considerable effect around the resonance region of bi-anisotropic MM slabs (resonance of resonating structures such as MM slabs does not change with thickness), the same change in thickness of the conventional material drastically alters forward/backward reflected and absorbed powers aside from the resonance region of bi-anisotropic MM slabs (thickness-resonance totally depends on the value of thickness of conventional materials). The outcomes presented here can be particularly useful for propagation-related applications requiring cascade connection of various MM slabs.
AtıfScopus14WoS14OpenAlex15İncele - MakaleYalnız künye2015Scopus SJRQ1Reference-Plane-Invariant Effective Thickness and Electromagnetic Property Determination of Isotropic Metamaterials Involving Boundary Effects
Hasar, Ugur Cem; Barroso, Joaquim José; Buldu, Gul; Bute, Musa; Kaya, Yunus; Karacali, Tevhit; Ertugrul, Mehmet
It is well recognized that near-field effects become dominant when the metamaterial (MM) is in resonance. In addition, any inaccurate information of the location of reference planes, and the effective length can seriously affect the accuracy of retrieved electromagnetic properties of MMs. By considering all these issues, in this research paper, we propose a retrieval method for reference-plane invariant and thickness-independent determination of electromagnetic parameters of MM slabs involving boundary effects. Our method first accomplishes determination of effective length of MMs and calibration-plane factors using scattering parameter measurements, aside the resonance region, of two identical MMs with different lengths. Our method then incorporates near-field effects in accurate retrieval of electromagnetic properties of MMs. The method is verified by scattering parameters simulated for a homogeneous conventional material and a weakly or negligibly coupled inhomogeneous MM slab made by two metallic concentric split-ring-resonators. Consequences of an inaccurate information of reference-plane transformation factors and the value of effective lengths and of noninclusion of near field effects on the retrieved electromagnetic properties are thoroughly discussed by way of few examples to substantiate the accuracy of the proposed method.
AtıfScopus15WoS15OpenAlex15İncele