Sürdürülebilir Kalkınma Amaçları
Yazarlar
Yayınlar
- MakaleAçık Erişim2022Scopus SJRQ3A Two-Stage ORC Integration to an Existing Fluidized Bed Sewage Sludge Incineration Plant for Power Production in the Scope of Waste-to-Energy
Abusoglu, A.; Tozlu, A.; Anvari-Moghaddam, A.
This paper presents the design, evaluation, and optimization of an electricity generation system based on the two-stage organic Rankine cycle (TS-ORC), which utilizes the waste heat of an existing fluidized bed sewage sludge incineration (FBSSI) facility. The facility incinerates an average of 300 tons per day of sewage sludge with a dry matter content of 22%. After the drying process, the sewage sludge is burned in a fluidized bed combustor, and exhaust gas at a temperature of about 850-900ºC is released due to the combustion. The system provides the energy required to dry the sludge from this exhaust gas. In this study, a TS-ORC is designed to be coupled to the exhaust gas flowlines discharged to the atmosphere at two different points in the FBSSI plant. The exergy efficiency of the FBSSI facility is found to be 70.5%. Three different working fluids are selected to examine the variations of thermodynamic and thermoeconomic performance parameters of the designed TS-ORC system. The highest power generation in the TS-ORC system (183.40 kW) is achieved using R1234yf as working fluid. R1234yf is also the most expensive fluid for electricity generation among the other working fluids (10.57 $/h). The least electricity generation in the TS-ORC (142.70 kW) occurs at the thermoeconomically most affordable cost with R245fa (9.35 $/h).
AtıfScopus2WoS2OpenAlex2
İncele - MakaleAçık Erişim2021Scopus SJRQ1A comparative thermoeconomic analysis and optimization of two different combined cycles by utilizing waste heat source of an MSWPP
Ozahi, Emrah; Abusoglu, Aysegul; Tozlu, Alperen
In this paper, thermodynamic and thermoeconomic analysis as well as genetic algorithm optimization of two combined cycles, a gas turbine-organic Rankine cycle (GT-ORC) and a gas turbine-Kalina cycle (GT-KAL) are carried out. The novelty of this study is that the cycles are adapted to an actual solid waste power plant to generate additional power from the exhaust gas. Thus, the power generation capacity of the actual power plant can be raised by using the combined cycle. Due to this reason, besides the thermodynamic analysis of the cycles, thermoeconomic analyses and optimizations are also very important in order to improve the actual system capacity. The net power output of GT-ORC and GT-KAL are found to be 1.51 MW and 1.59 MW, respectively. The results obtained are seen to be reasonable when compared to the net power output of the power plant (5.66 MW). Another originality of this study is that the thermoeconomic results are improved by utilizing a multi-objective optimization method namely non-dominated sorting genetic algorithm method (NSGA-II). Thus, the two objectives, total power output and the total cost rate, at the design stage of the cycles are optimized and enhanced. Due to the optimization results, it is found that the net power output of the GT-ORC and GT-KAL are increased by 11.34% and 0.99%, respectively, while the total cost rates are decreased by 18.59% and 1.31%, respectively. GT-ORC with the net power output of 1.70 MW is seen to be more efficient as compared to GT-KAL which produces a net power output of 1.61 MW. However, the total and the capital cost rates of GT-ORC are found to be higher than those of GT-KAL.
AtıfScopus7WoS5OpenAlex11İncele