Sürdürülebilir Kalkınma Amaçları
Yazarlar
- Doǧar, Ç.(1)
- Gürses, A.(1)
- Ugurlu, Nuray(1)
- Uǧurlu, M.(1)
- Yalçin, M.(1)
- Yilmaz, Bahadir(1)
Yayınlar
- MakaleAçık Erişim2023Scopus SJRQ1The effect of waste material generated during paper production on the rheological and structural features of asphalt binder
Yilmaz, Bahadir; Ugurlu, Nuray
In this study, the performance properties of magnesium lignosulfonate, an organic waste material produced during paper production from wood, on asphalt binder were investigated. The modification was carried out by adding magnesium lignosulfonate (MLS) at 2%, 4%, 6%, and 8% by weight to the asphalt with B50/70 penetration grade. The morphological structure, modification mechanism, and thermal decomposition temperatures of the modified asphalt binders formed by adding the MLS to the asphalt were determined by a Scanning Electron Microscope (SEM), Fourier Transform Infrared Spectroscopy (FT-IR), and Thermogravimetry-Differential Thermal Analysis (TG/DTG), respectively. The physical and rheological properties of the material were determined by penetration, softening point, Rolling Thin Film Oven Test (RTFOT), Dynamic Shear Rheometer (DSR), and Rotational Viscometer (RV) experiments conducted in a laboratory. The experimental results showed that the organic-based waste additive increases the asphalt consistency, rutting, and short-term aging resistance, and decreases the temperature sensitivity.
AtıfScopus6WoS7OpenAlex7
İncele - MakaleYalnız künye2008Scopus SJRQ1The removal of lignin and phenol from paper mill effluents by electrocoagulation
Uǧurlu, M.; Gürses, A.; Doǧar, Ç.; Yalçin, M.
This study aims to investigate the treatment of paper mill effluents using electrocoagulation. Removal of lignin, phenol, chemical oxygen demand (COD) and biological oxygen demand (BOD) from paper mill effluents was investigated at various current intensities by using different electrodes (Al and Fe) and at various electrolysis times (1.0, 2.5, 5.0 and 7.5 min). It was observed that the experiments carried out at 12 V, an electrolysis time of 2 min and a current intensity of 77.13 mA were sufficient for the removal of these pollutants with each electrode. The removal capacities of the process using an Al electrode were 80% of lignin, 98% of phenol, 70% of BOD, and 75% of COD after 7.5 min. Using an Fe electrode the removal capacities were 92%, 93%, 80% and 55%, respectively. In addition, it was found that removal of lignin, phenol, BOD and COD increased with increasing current intensity. In the experiments carried out at different current intensities, higher removal can be explained through a decrease in intra-resistance of solution and consequently an increase at the transfer speed of organic species to electrodes. It was also found that Al electrode performs higher efficiency than Fe electrode except for COD removal. However, the time required for removal of BOD was more than that of COD. The results suggest that electrocoagulation could be considered as an effective alternative to paper mill effluents treatment.
AtıfScopus257OpenAlex275
İncele