Sürdürülebilir Kalkınma Amaçları
Yayınlar
- BildiriYalnız künye2015Scopus SJRQ3Removal of Reactive Black 5 from wastewater using natural clinoptilolite modified with apolaccase
Nadaroglu, Hayrunnisa; Kalkan, Ekrem; Celebi, Neslihan; Tasgin, Esen
In this study, a clinoptilolite modified with apolaccase was used to adsorb Reactive Black 5 (RB5) dye from aqueous solution using the batch procedure. The influences of pH, contact time, temperature and absorbent dosage on the adsorption were investigated. The optimum adsorption was obtained at pH = 6, contact time = 60 min, temperature = 25 degrees C and adsorbent dosages of 1.62 and 1.59 mg/50 mL per gram of clinoptilolite and of apolaccase-modified clinoptilolite (LMC), respectively). The adsorption experimental data fitted both the Langmuir and Freundlich isotherm models well. In addition, pseudo-first-order and pseudo-second-order kinetics were used to study the kinetics of RB5 dye adsorption onto natural clinoptilolite and LMC. Adsorption appears to follow pseudo-second-order kinetics with a high correlation coefficient. Thermodynamic parameters such as changes in the free energy (Delta G degrees), enthalpy (Delta H degrees) and entropy (Delta S degrees) of adsorption were calculated. The thermodynamic parameters indicate that the adsorption of RB5 dye onto LMC was less spontaneous, feasible and endothermic. The LMC can be used as an alternative low-cost adsorbent for the dye removal from aqueous solutions.
AtıfWoS8OpenAlex8
İncele - MakaleAçık Erişim2015Scopus SJRQ2Experimental study to remediate acid fuchsin dye using laccase-modified zeolite from aqueous solutions
Kalkan, Ekrem; Nadaroglu, Hayrunnisa; Celebi, Neslihan; Celik, Hulya; Tasgin, Esen
This paper studies, the removal of acid fuchsin dye from aqueous solutions using zeolite natural material after its modification with laccase from Russulaceae (Lactarius volemus). Batch adsorption experiments were performed as a function of pH, contact time, temperature, and adsorbent dosage. The optimum results were obtained at pH 5, contact time of 60 min, temperature of 60ºC, and an adsorbent dosage of 1.5 mg/mL. The isotherm studies show that the adsorption experimental data are fitted well by Langmuir isotherm model. The adsorption capacity found is 31 mg/g. The kinetics of AFD adsorption on LMZ is best described with the pseudo-first-order kinetics model. Thermodynamic parameters including Gibbs free energy, enthalpy, and entropy changes indicate that the adsorption of Acid Fuchsin dye onto laccase-modified zeolite is feasible, spontaneous, and exothermic. The results show that laccase-modified zeolite can be used as an alternative lowcost adsorbent for dye removal from aqueous solutions.
AtıfScopus33WoS27OpenAlex29
İncele