Sürdürülebilir Kalkınma Amaçları

• 1
• 1
• 1

• MakaleAçık Erişim2026Scopus SJRQ1/r/bayburt/12646
  Microwave-Assisted Extraction of Pectin from Pickled Cabbage Waste: Process Optimisation, Characterisation and Application in Low-Sugar Jam

  Cebeci Aydın, Fatma; Erten, Tayyibe

  This study optimised pectin extraction from pickled cabbage waste using microwave-assisted extraction (MAE), characterised the extracted pectin, and explored its potential for low-sugar jam production. The Box–Behnken design concluded that the optimal conditions are 539 W (microwave power), 116 s (time), and pH 1.5, yielding a pectin yield of 22.53 ± 2.63%. The physicochemical analysis revealed that the microwave-extracted pectin (MEP) was low methoxyl and had a high molecular weight (1.20 ± 0.004 MDa). It was composed of galacturonic acid, arabinose, rhamnose, xylose and glucose. FTIR, 1H NMR and SEM results also confirmed structural characteristics of MEP. MEP was confirmed to have remarkable technological properties, including an emulsion activity of 53.43 ± 2.19% and good stability over 30 days at 4 °C and 24 °C. Moreover, it has an oil-holding capacity of 1.18 ± 0.51 g oil/g pectin and an elevated water-holding capacity (9.36 ± 3.25 g water/g pectin). The application of MEP as a stabiliser in low-sugar jam enhanced viscoelastic characteristics of jam, like apple pectin, and G′ > G″ confirmed the improved shelf-life stability at 25 °C. This study emphasised that microwave-assisted extraction can be a sustainable, time- and energy-saving method for the valorisation of pickled cabbage waste, and highlighted the effect of MEP on the characteristics of low-sugar jam.

  • 
  • 
  İncele
• MakaleAçık Erişim2022Scopus SJRQ1/r/bayburt/13528
  Conventional and Microcellular Injection Molding of a Highly Filled Polycarbonate Composite with Glass Fibers and Carbon Black

  Yilmaz, Galip; Devahastin, Apichart; Turng, Lih-Sheng

  Conventional solid injection molding (CIM) and microcellular injection molding (MIM) of a highly filled polycarbonate (PC) composite with glass fibers and carbon black were performed for molding ASTM tensile test bars and a box-shape part with variable wall thickness. A scanning electron microscope (SEM) was used to examine the microstructure at the fractured surface of the tensile test bar samples. The fine and uniform cellular structure suggests that the PC composite is a suitable material for foaming applications. Standard tensile tests showed that, while the ultimate strength and elongation at break were lower for the foamed test bars at 4.0–11.4% weight reduction, their specific Young’s modulus was comparable to that of their solid counterparts. A melt flow and transition model was proposed to explain the unique, irregular “tiger-stripes” exhibited on the surface of solid test bars. Increasing the supercritical fluid (SCF) dosage and weight reduction of foamed samples resulted in swirl marks on the part surface, making the tiger-stripes less noticeable. Finally, it was found that an injection pressure reduction of 25.8% could be achieved with MIM for molding a complex box-shaped part in a consistent and reliable fashion.

  • 
  AtıfScopus2·WoS2·OpenAlex3

  İncele
• MakaleAçık Erişim2020Scopus SJRQ1/r/bayburt/10804
  Isolation and Biophysical Characterisation of Bioactive Polysaccharides from Cucurbita Moschata (Butternut Squash)

  Jiwani, Shahwar Imran; Gillis, Richard B.; Besong, David; Almutairi, Fahad; Erten, Tayyibe; Kök, M. Samil; Harding, Stephen E.; Paulsen, Berit S.; Adams, Gary G.

  Cucurbits are plants that have been used frequently as functional foods. This study includes the extraction, isolation, and characterisation of the mesocarp polysaccharide ofCucurbita moschata. The polysaccharide component was purified by gel filtration into three fractions (NJBTF1, NJBTF2, and NJBTF3) of different molecular weights. Characterisation includes the hydrodynamic properties, identification of monosaccharide composition, and bioactivity. Sedimentation velocity also indicated the presence of small amounts of additional discrete higher molecular weight components even after fractionation. Sedimentation equilibrium revealed respective weight average molecular weights of 90, 31, and 19 kDa, with the higher fractions (NJBTF1 and NJBTF2) indicating a tendency to self-associate. Based on the limited amount of data (combinations of 3 sets of viscosity and sedimentation data corresponding to the 3 fractions), HYDFIT indicates an extended, semi-flexible coil conformation. Of all the fractions obtained, NJBTF1 showed the highest bioactivity. All fractions contained galacturonic acid and variable amounts of neutral sugars. To probe further, the extent of glycosidic linkages in NJBTF1 was estimated using gas chromatography-mass spectrometry (GCMS), yielding a high galacturonic acid content (for pectin polysaccharide) and the presence of fructans-the first evidence of fructans (levan) in the mesocarp. Our understanding of the size and structural flexibility together with the high bioactivity suggests that the polysaccharide obtained fromC. moschatahas the potential to be developed into a therapeutic agent.

  AtıfScopus8·WoS10·OpenAlex10

  İncele