Yazarlar
Yayınlar
- MakaleAçık Erişim2025Scopus SJRQ1A Hybrid Retrieval Method for an Ω-Class Bianisotropic Metamaterial Using Scattering Parameter Method
Ozturk, Gokhan; Hasar, Ugur Cem; Kaya, Yunus; Korkmaz, Huseyin; Stoyanov, Ivaylo
In this study, a hybrid retrieval method is proposed to retrieve all terms in the electric and magnetic tensors (along with coupling tensors) of Ω -class bianisotropic metamaterial (MM) slabs using scattering (S-) parameters of both normal incidence TE2 mode and oblique incidence TM2 and TE modes. Compared with other extraction methods in the literature, our retrieval method fully characterizes the MM slab (extracts all constitutive parameters) without necessitating any numerical technique (non-iterative) using fewer wave configurations (two modes) and sample configurations (one configuration). Contrary to two sample configurations required in the application of previous retrieval methods in the literature, one sample configuration (with and without its rotation in the transverse plane) significantly decreases the effect of fabrication tolerances on the accuracy of extraction. The proposed extraction method is first validated by a bulk MM slab synthesized by the Lorentz and Drude models. Then, it is applied for extracting the electromagnetic properties of two bianisotropic MM slabs in the form of square split-ring-resonators and Ω -shape using their S-parameters simulated by a full wave simulation program. Finally, its accuracy is examined by comparing simulated S-parameters with those reconstructed by using extracted electromagnetic parameters. It is observed that our proposed method determines the constitutive parameters with a relatively higher accuracy in a relatively short amount of time.
AtıfScopus2WoS1
İncele - MakaleAçık Erişim2024Scopus SJRQ1De-Embedding Technique for Parameter Extraction of Biaxial Bianisotropic Metamaterial Slabs
Hasar, Ugur Cem; Kaya, Yunus; Korkmaz, Huseyin; Iliev, Teodor
Among material classes of isotropic, anisotropic, bi-isotropic, and bianisotropic, the latter class is important because, as different from other classes, the bianisotropic class can describe complex behavior of various materials through tensor expressions between electric and magnetic fields via electric and magnetic flux densities. All electromagnetic parameters (a total of seven) of a general bianisotropic material need to be accurately extracted for understanding its response and characteristic. Extraction methods can be utilized for such a goal. However, the extraction methods in the literature either require a formal calibration procedure or are limited to the extraction of three electromagnetic parameters only. In this study, an attractive self-calibrating waveguide method has been devised for determination of electromagnetic parameters of biaxial biansiotropic metamaterial (MM) slabs. Its first advantage is that it uses a thru connection in addition to the MM-loaded line connection (three different configurations - Case A, Case B, and Case C) and empty-line connection next to the MM-loaded line connection to extract all (seven) constitutive parameters together with the magnetoelectric coupling coefficient. Its second advantage is that it relies on explicit expressions and does not require any calibration process for such an extraction. Simulations and uncalibrated scattering parameter waveguide measurements at X-band (8.2 - 12.4GHz) were performed for a biaxial bianisotropic MM slab made by C-patterned resonators to validate the proposed method. It is observed that extracted electromagnetic parameters by the proposed method satisfy the passivity conditions over the entire frequency band except for a few frequency points or regions (e.g., f = 8.2 GHz). Its reason is expected to be associated with the difficulty in satisfying the continuous medium property at such frequencies. Besides, it is noted that two of the constitutive parameters (ɛ 2 and μ3) illustrate a thickness-resonance behavior revealed by additional measurements of the Case B - MM structure with different lengths (7.675 mm, 9.21 mm, and 10.475 mm). Besides, it is noted that the resonance behavior of the Case C - MM structure changes with a change in periodicity. Specifically, when the periodicity in the x direction of this MM structure changes from approximately 3.26 mm to 2.29 mm, the resonance frequency shifts from nearly 10.43 GHz to 10.30 GHz (a 1.25% variation). Finally, sensitivity, uncertainty, and error analyses were also performed to evaluate and improve its accuracy. It is observed that |3/Λ 1A| | is 14 times greater than | xi 0 / Λ 1A| | at 10.85 GHz where Λ 1A is one of the terms related to measured S-parameters for the Case A - MM structure, and |∗ | denotes the magnitude of the complex number ∗
AtıfScopus1WoS1OpenAlex1İncele - MakaleAçık Erişim2021Scopus SJRQ1Prediction of water-adulteration within honey by air-line de-embedding waveguide measurements
Hasar, Hafize; Hasar, Ugur Cem; Kaya, Yunus; Ozturk, Hamdullah; Izginli, Mucahit; Ozbek, Ibrahim Yucel; Oztas, Taskin; Canbolat, Mustafa Yildirim; Ertugrul, Mehmet
An efficient de-embedding air-line microwave method has been proposed for accurate relative complex permittivity, εr=εr′−iεr′′, measurement of water-adulteration level within honey. It could be effectively applied to eliminate the errors arising from usage of imperfect calibration standards because it bypasses the requirement of these standards. Its accuracy is improved by utilizing the unitary and similarity properties of a passive two-port network, and then is compared with the accuracy of a calibration-dependent method present in the literature by using normalized root-mean-square-error (N-RMSE) values of εr′ and εr′′ of distilled water, in reference to the Debye value. From this comparison, it is observed that N-RMSE values calculated for εr′ (and εr′′) by using this calibration-dependent method and the (improved) proposed method are, respectively, around 0.1955 (0.1002) and 0.1962 (1.1067), indicating a good agreement between them. After validation the proposed de-embedding method using distilled water measurements, tested pure honey was adulterated with distilled water by different percentage values δ ranging from 1% to 10% in 1% increments. It is observed that the maximum distance between extracted εr′ (or εr′′) values of adulterated honey by the applied calibration-dependent method and the proposed method is less than 2%. Afterward, an empirical formula was devised to fit εr′ and εr′′ values from measured εr of water-adulterated honey with various δ levels. It is noted that extracted εr′ is much more better fitted than extracted εr′′, especially for δ≤4. Next, an optimization process is followed to evaluate the frequency for optimum prediction of adulteration levels using the empirical formula based on εr′ or εr′′. It is noticed that optimized δ values using the empirical formula based on εr′ (with an average prediction error of around 0.071 at 4.5 GHz) are superior to optimized δ values using the empirical formula based on εr′′ (with an average prediction error of around 0.085 at 4.2 GHz) for prediction of previously known δ values. Sensitivity and uncertainty analyses were performed to assess and improve the accuracy of the proposed method.
AtıfScopus24WoS23OpenAlex24İncele