Sürdürülebilir Kalkınma Amaçları
Yazarlar
Yayınlar
- MakaleYalnız künye2017Scopus SJRQ2Solar Pond Window Technology for Energy-Efficient Retrofitting of Buildings: An Experimental and Numerical Investigation
Cuce, Erdem; Cuce, Pinar Mert
Windows are responsible for an important proportion of heat loss from building envelope due to inadequate insulative characteristics of traditional glazing products. In this respect, advanced glazing solutions are of vital importance to mitigate energy demand of buildings, thus to reduce carbon emissions. Therefore, in this research, a novel glazing technology called solar pond window is introduced, and it is numerically and experimentally investigated for different design configurations. The optimum design of this novel glazing covers four 5-mm-thick glass panes, two 20-mm-thick water layers, and one 20-mm-thick Krypton layer in the middle. The average heat transfer coefficient (U-value) of the optimum case is found to be about 0.40 W/m 2 K. If air is used as insulative gas in the interlayer, the U-value of the glazing is determined to be around 0.90 W/m 2 K, which is still competitive with the U-value range of argon-filled triple-glazed windows with low-e coatings. The fabrication cost of the optimum design of solar pond window is around €120/m 2. Overall, solar pond window technology is a cost-effective and energy-efficient glazing, which has a great potential to be the future of fenestration products as well as being capable of meeting the latest building fabric standards.
AtıfScopus10WoS7OpenAlex9
İncele - MakaleAçık Erişim2016Scopus SJRQ1Novel glazing technologies to mitigate energy consumption in low-carbon buildings: A comparative experimental investigation
Cuce, Erdem; Cuce, Pinar Mert; Riffat, Saffa
Buildings play a key role in total world energy consumption as a consequence of poor thermal insulation characteristics of facade materials. Among the elements of a typical building envelope, windows are responsible for the greatest energy loss because of their notably high overall heat transfer coefficients. About 60% of heat loss through the building fabric can be attributed to the glazed areas. In this respect, novel cost-effective glazing technologies are needed to mitigate energy consumption, and thus to achieve the latest targets toward low/zero carbon buildings. Therefore in this study, three unique glazing products called vacuum tube window, heat insulation solar glass and solar pond window which have recently been developed at the University of Nottingham are introduced, and thermal performance analysis of each glazing technology is done through a comparative experimental investigation for the first time in literature. Standardized co-heating test methodology is performed, and overall heat transfer coefficient (U-value) is determined for each glazing product following the tests carried out in a calibrated environmental chamber. The research essentially aims at developing cost-effective solutions to mitigate energy consumption because of windows. The results indicate that each glazing technology provides very promising U-values which are incomparable with conventional commercial glazing products. Among the samples tested, the lowest U-value is obtained from the vacuum tube window by 0.40W/m2K, which corresponds to five times better thermal insulation ability compared to standard air filled double glazed windows.
AtıfScopus35WoS33OpenAlex37İncele