Sürdürülebilir Kalkınma Amaçları
Yazarlar
Yayınlar
- MakaleAçık Erişim2026The Frequency-Dependent Electrical Properties and Fabrication of Diode
Sevgili, Omer; Orak, Ikram; Özel, Sultan Suleyman; Özel, Faruk
The fabrication of Al/NiO/p-Si Schottky diode (SD) was formed using a thermal evaporation system. The structural analyze of NiO using an interfacial layer was conducted using a Scanning Electron Microscope (SEM) and the SEM cross-section revealed a thickness of 0.0345 mu m for NiO interfacial layer. The capacitance-voltage (C-V) and conductance-voltage (G/omega-V) measurements of the fabricated SD were performed in the 50 kHz to 5 MHz frequency range and in the-3 V to +3 V range. The Nicollian-Brews method was employed to calculate the series resistance (Rs), while the high-low frequency capacitance method (CHF-CLF) was used to calculate the surface states (Nss). The value of the Nss was determined to be in the order of 1012 eV-1cm-2. These findings suggest that NiO is a promising alternative to conventional insulating layers in electronic devices.
- MakaleYalnız künye2020Scopus SJRQ1Current–voltage analyses of Graphene-based structure onto Al2O3/p-Si using various methods
Efil, Esra; Kaymak, Nuriye; Seven, Elanur; Orhan, Elif Oz; Bayram, Ozkan; Ocak, Sema Bilge; Tataroglu, Adem
The present study's main purpose is to determine the current-voltage (I–V) performance of Graphene (Gr) based hetero nanostructure produced on Al2O3/p-Si. Graphene synthesis was carried out using the chemical vapor deposition (CVD) technique on Copper (Cu) foils used as a metal catalyst and transferred onto Al2O3/p-Si using the conventional transfer method. The I–V characteristics of this structure were measured in the dark environment, and the electrical properties of the Gr/Si structure were characterized at room temperature. The rectifying ratio (RR) of the structure was found to be about 103 at ± 3 V. The electrical properties of ideality factor (n), series resistance (Rs), and barrier height (Φb) were examined by using the theory of Thermionic Emission (TE), Norde's method, and Cheung's method. The values of Φb, which were calculated using Norde's method, Cheung's method, and the theory of thermionic emission (TE), were found to be 0.69 eV, 0.71 eV, and 0.68 eV, respectively. The ideality factor was found to be approximately 3.89 according to the theory of TE. The values of series resistance were also determined using the Norde's method and Cheung's two different parameters (dV/dln(I) and H(I)) found to be 9.60 kΩ, 9.12 kΩ, and 5.94 kΩ, respectively.
AtıfScopus25WoS25OpenAlex26
İncele