Sürdürülebilir Kalkınma Amaçları

• 1

• MakaleAçık Erişim2025/r/bayburt/14209
  EFFECT OF SCRAP RATIO ON LIQUID METAL QUALITY OF LOW-PRESSURE DIE-CASTING (LPDC) ALLOY USING ROTARY DEGASSING

  Tokatli, Mehmet; Çolak, Murat; Yüksel, Caglar

  Although various processes are used in aluminum liquid metal cleaning, environmentally friendly, economical and applicable methods should be preferred in industry. Among these methods, the Density Index test based on the reduced pressure test (RPT), which is widely used to measure the efficiency of the rotary degassing process, and the K-mold test method, which offers fast and practical results were carried out. The effects of rotary degassing method on the liquid metal quality of AlSi7Mg0.3 (A356) aluminum alloy charges prepared with different proportions of scrap and ingots were evaluated using a constant 5l/min gas flow rate, a constant 5 min process time and a constant 300 rpm rotor rotation speed. The results show that the Density Index values can be reduced from 1.48% to around 0.74% with increasing scrap rate, while K-mold values can be reduced from 2.8 to 0.6. It was also shown that the rotary degassing method is effective in liquid metal cleaning, and the K-mold test can be used as a very practical control tool for evaluating liquid metal quality.

  • 
  İncele
• MakaleAçık Erişim2024/r/bayburt/14139
  Characterisation of aluminum alloys by octopus fluidity test

  Erzi, Eray; Yüksel, Caglar; Gürsoy, Ozen; Çolak, Murat; Dispinar, Derya

  Aim Determination of fluidity and tensile property characteristics of A206, A201 and A380 alloy with new octopus design Design & Methodology Melting and casting of alloys into sand moulds. Measurement of fluidity length and tensile properties Originality New fluidity test mould design where different cross section thicknesses are used to characterise the alloy properties Findings A356 has the lowest fluidity. A201 has lower fluidity compare to A206 but has the highest strength. A380 has similar characteristics with A201 Conclusion A380 can be an alternative choise for A201 alloy Declaration of Ethical Standards The authors of this article declare that the materials and methods used in this study do not require ethical committee permission and/or legal-special permission.

  AtıfWoS3·OpenAlex3

  İncele