Sürdürülebilir Kalkınma Amaçları

• 1

• MakaleAçık Erişim2021Scopus SJRQ3/r/bayburt/13310
  A novel approach to finding optimum operating conditions of design factors for the grinding experiment

  Uçurum, Metin; Özdemir, Akın; Teke, Çağatay; Tekin, İlker

  The efficiency of grinding experiments is an important issue for many industries. In this paper, a central composite design-based methodology was proposed to investigate the four design factors that affect the particle sizes. The four design factors were specified as mill speed (% of Nc), ball filling ratio (fc), powder filling ratio (jb) and grinding time (min). Another important issue was how to obtain an optimum operating condition for four design factors. For this particular purpose, a novel dual response optimization model was proposed using the particle sizes (d 10, d 50, and d 90) and the span value concept. This proposed approach was compared to the desirability function-based optimization concept. The verification study of the experiment was also carried out. The results of the grinding experiment runs showed that the optimum operating conditions were mill speed 73.495% of Nc, ball filling ratio 0.354, powder filling ratio 0.157, and grinding time 70 min. In addition, d 10, d 50, and d 90 were found 3.31 µm, 12µm, and 45.6 µm, respectively. The span value was also found at 3.52.

  AtıfScopus3·WoS3·OpenAlex4

  İncele
• MakaleAçık Erişim2019Scopus SJRQ2/r/bayburt/12283
  Optical, surface and magnetic properties of the Ti-doped GaN nanosheets on glass and PET substrates by thermionic vacuum arc (TVA) method

  Pat, Suat; Korkmaz, Şadan; Özen, Soner; Şenay, Volkan

  Room-temperature ferromagnetism of GaN and doped GaN materials has been reported in nanostructured form. Especially, nanoparticles show ferromagnetic properties at room temperature. In this paper, Ti-doped effects on GaN were deposited on glass and Polyethylene terephthalate (PET) substrates by thermionic vacuum arc and their room temperature magnetic properties are presented for the first time. The structure of the Ti-doped GaN was crystallized in a novel form, nano honeycomb formation. Optical and surface properties of the nano honeycombs and honeycomb nanosheets were determined. GaN and TiN phases were detected in X-ray diffraction patterns. Field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) device were used for imaging of the crystal structure. According to FESEM images, hexagonal crystal formations were detected for all samples. Crystal formations are very good oriented on PET substrates materials according to glass samples. The band gap value of the sample is changed by crystallization dimension. It was found that increasing crystallizations and decreasing crystal dimensions were increased the band gap of the Ti-doped GaN approximately 50 meV. Fourier transform infrared spectra and a vibrating sample magnetometer results were presented. These results confirm the Ti doped GaN honeycomb nanosheets and nano honeycombs show the room temperature ferromagnetic properties.

  AtıfScopus8·WoS6·OpenAlex8

  İncele
• MakaleAçık Erişim2016Scopus SJRQ3/r/bayburt/12311
  Investigation of the cyanide leaching optimization for ultrafine grinding gold–silver ore

  Birol, Onur; Uçurum, Metin

  In recent years, the ultrafine grinding (UFG) process has become increasingly important for the recovery of precious metals (especially for Au and Ag) from raw ores. It is well known that cyanide leaching of gold–silver ore has been an accepted process in the world. In the current study, UFG was proposed as a pretreatment method prior to cyanide leaching of a gold–silver ore. First, the ore was crushed and ground by jaw, cone crusher, and ring mill, respectively. Particle size of ground product was 75 µm based d80. Second, the fine product was subjected to the grinding process by vertical wet stirred ball mill, and the final ultrafine product was used as leach feed material. The leach feed material had about d80 = 20 µm and d50 = 6.02 µm particle size. Some important leaching parameters were optimized by using the ultrafine powder in the study. The final leach experiments demonstrated that the recoveries of Au and Ag were 91.92% and 82.15% under optimum leaching conditions such as 150 kg/t quicklime dosage, 25% pulp density, 85°C leach temperature, 500 g/t cyanide concentration, and 90 h leaching time.

  • 
  AtıfScopus11·WoS10·OpenAlex11

  İncele