Hasar, Hafize; Hasar, Ugur C.; Kaya, Yunus; Ozturk, Hamdullah; Izginli, Mucahit; Oztas, Taskin; Aslan, Nevzat; Ertugrul, Mehmet; Barroso, Joaquim J.; Ramahi, Omar M.

Microwave techniques, as an indirect approach, can be applied for analyzing water content in honey by way of permittivity measurements. However, these techniques require proper calibration to accurately perform such indirect evaluation. Improper calibration standards used in this calibration process could naturally result in a reduction in the accuracy and thus the performance of dielectric characterization using microwaves. Self-calibrating microwave techniques can reduce the effects of imprecise standards and thus improve the performance of microwave measurements by bypassing the requirement of calibration standards. In this study, we develop a self-calibrating microwave measurement technique to determine the relative permittivity of honey samples and implement binary mixing models to predict adulteration levels of water-adulterated honey. From this implementation, it is observed that the parallel-capacitance mixing model could efficiently be applied to determine the concentration of water adulteration by examining the differences between absolute values of the real parts of the measured and predicted complex permittivities of adulterated honey.

AtıfScopus18·WoS16·OpenAlex18

İncele

Hasar, Ugur C.; Kaya, Yunus; Izginli, Mucahit; Ozturk, Hamdullah; Barroso, Joaquim J.; Ramahi, Omar M.; Ertugrul, Mehmet

A microwave method is proposed to determine the forward and backward propagation constants (gamma ⁺ and gamma ⁻) and the wave impedance ( z_w ) of reciprocal and non-reciprocal microwave networks whose positions are not known within their measurement cells (position-insensitive). The proposed method relies purely on analytical expressions and can also evaluate the reference plane transformation distances. Scattering parameter measurements at the X-band (8.2-12.4 GHz) of a reciprocal network (a waveguide straight) and a non-reciprocal network (a microwave phase shifter) arbitrarily positioned into their measurement cells were conducted to retrieve gamma ⁺, gamma ⁻, and z_w for validation of our method and testing its position-insensitive property. The importance of the method becomes apparent when compared to conventional methods whose accuracy is based on precise determination of the reference planes.

AtıfScopus9·WoS9·OpenAlex9

İncele

Hasar, Ugur Cem; Buldu, Gul; Kaya, Yunus; Ozturk, Gokhan

A recursive algorithm is proposed to accurately extract the electromagnetic parameters of isotropic/bianisotropic metamaterial (MM) slabs of inhomogeneous structures. The algorithm is based on the recursive calculations of measured/ simulated forward and backward scattering (S-) parameters from previously extracted wave impedances and refractive indices of each homogeneous layer (except the analyzed intermediate layer) by a suitable retrieval method. There are two main advantages of our proposed method over existing extraction algorithms. First, it could retrieve the electromagnetic parameters of both isotropic and bianisotropic MM slabs. Second, it is applicable for electromagnetic parameter extraction of inhomogeneous structures. For validation of our method and assessing its accuracy over existing extraction methods, we used the simulation results of various inhomogeneous structures constructed by different isotropic/bianisotropic MM slabs (split-ring-resonator (SRR), SRR-wire, omega, and omega-wire). For completeness, the effects of noise present in S-parameters and iterative error (by increasing the value of iteration numbers) are examined to test the robustness of the proposed algorithm.

AtıfScopus43·WoS42·OpenAlex47

İncele

Hasar, Ugur C.; Kaya, Yunus; Barroso, Joaquim José; Ertugrul, Mehmet

We propose an effective microwave method for reference-plane-invariant and thickness-independent constitutive parameters measurement of thin materials. A function depending only on the interface reflection coefficient to facilitate fast computations of constitutive parameters is derived. In addition to the extraction of sample thickness, the method can also be applied to unique retrieval of constitutive parameters whose electromagnetic properties are yet unknown. We have performed an uncertainty analysis to examine how the accuracy of the method can be improved. Finally, we have compared the proposed method with other similar methods in the literature using measurements of distilled water and a thinner Plexiglas sample (1 mm). From the comparison, we note that the accuracy of our proposed method is not affected by any inaccurate knowledge of reference-plane positions and the sample length (or both) while those of compared methods are seriously decreased.

AtıfScopus53·WoS52·OpenAlex52

İncele