İlgi alanları

Sürdürülebilir Kalkınma Amaçları

• 1
• 1
• 1
• 1

• MakaleAçık Erişim2018Scopus SJRQ1/r/bayburt/13597
  A novel method based on thermal conductivity for material identification in scrap industry: An experimental validation

  Cuce, Erdem; Cuce, Pinar Mert; Guclu, Tamer; Besir, Ahmet; Gokce, Erkan; Serencam, Ugur; Serencam, Huseyin

  Fast, accurate and reliable identification and sorting of materials is still a challenge in recycling sector. Scrap metals are often classified through density and colour, which cause notable financial burdens to the companies in most cases. Within the scope of this research, a novel method based on thermal conductivity is presented for material identification in scrap industry. The unit consists of a constant heat flux source and a cooling system, in which axial heat conduction is enabled and radial heat transfer is eliminated. For the steady-state conditions, temperature gradient across the sample metals is measured along with the constant heat flux value, and the thermal conductivity of the samples is determined via the Fourier's heat conduction law. Copper, brass and stainless steel samples are considered in this research to verify the accuracy of the results. For a reliable and scientific approach, three independent sets of experiments are conducted, and the results are evaluated in terms of accuracy and consistency. Experimental thermal conductivity values of the said samples are compared with the reported data in literature and a good accordance is achieved. Error in measurements is calculated to be 1.37, 3.31 and 4.46% for copper, brass and stainless steel sample, respectively which is acceptable. The tests are repeated with highly sensitive probes for aluminium sample, and the measurement error is calculated to be 0.56%.

  • 
  AtıfScopus21·WoS19·OpenAlex19

  İncele
• Derleme MakaleYalnız künye2018Scopus SJRQ1/r/bayburt/12500
  Green roofs and facades: A comprehensive review

  Besir, Ahmet B.; Cuce, Erdem

  Based on United Nations Environment Program (UNEP), building sector accounts for 40% of total energy consumption. In European countries, 36% of total greenhouse gas emissions is attributed to buildings. In this respect, green roofs are considered to be one of the most appropriate sustainable solutions to resolve the urban heat island-related issues. Roofs account for nearly 20–25% of overall urban surface areas. Energy saving, thermal insulation, shading and evapotranspiration features highlight the key role of green roofs in overall thermal performance of buildings and microclimatic conditions of indoor environments. Within the scope of this research, the concept of green roofs and facades is comprehensively analysed in a holistic and thematic way. Following a historical overview of the technology, the research is split into various subfields such as energy saving in buildings through greenery systems, multifunctional thermal benefits including evapotranspiration, thermal insulation, shading and thermal comfort features, evaporative cooling for reducing cooling demand and minimising wind driven convection losses. The results achieved from the literature survey clearly indicate that green roofs and facades are key solutions to mitigate building-related energy consumptions and greenhouse gas emissions. According to the previous works, heat flow through the building roofs in summer can be reduced by approximately 80% via green roofs. The green roofs are reported to consume less energy in the range of 2.2–16.7% than traditional roofs during summer time. A similar tendency is observed for the winter season depending on regional and climatic conditions. The temperature difference between conventional and greens roofs in winter is found to be about 4 °C, which is remarkable. Energy demand of buildings in summer is highly dependent on the plant intensity as it is reported to be 23.6, 12.3 and 8.2 kWh/m2/year for extensive, semi-intensive and intensive greenery surface, respectively. Greenery systems are also capable of providing thermally comfortable indoor and outdoor conditions. It is underlined that the annual average accumulation of CO2 reaches the level of 13.41–97.03 kg carbon/m2 for 98 m2 of vertical greenery system. The results of this research can be useful for dwellers, builders, architects, engineers and policy makers to have a good understanding about the potential of green roofs and facades to mitigate building-related energy consumptions and carbon emissions in a renewable, sustainable, energy-efficient and cost effective way.

  • 
  • 
  • 
  AtıfScopus547·WoS435·OpenAlex617

  İncele