Yazarlar
Yayınlar
- MakaleAçık Erişim2021Scopus SJRQ3Determination of some engineering properties of volcanic tuff using non-destructive method
Can, Ömer
Volcanic tuffs extracted from the quarries of Bayburt province in Turkey are of three different types locally identified as white, yellow and green Bayburt stones. This study was intended to estimate the compressive strength of white, yellow and green Bayburt stones by non-destructive testing methods. For this, non-destructive tests such as the nail penetration test (NPT), Schmidt rebound hammer (SRH) test and ultrasonic pulse velocity (UPV) test were performed. A uniaxial compression test was also performed so as to assess the accuracy of the results obtained from the non-destructive tests. For the NPT, nails manufactured for the gun having 27 and 39 mm length were used. In total, 45 nails were nailed and average the values were taken. Also, uniaxial compressive strength (UCS) and UPV tests were performed on 30 samples in total; furthermore, a total of 60 impacts for the SRH test were performed. The relationship between the results recorded from NPT and UCS, SRH and UPV was determined by regression analysis and comparison. The relative absolute errors between the measured values and the predicted values are below 4% for SRH-NPT comparison and below 9% for UPV-NPT comparison. This method of estimating the compressive strength, by using these non-destructive experiments, was appraised as suitable.
- MakaleYalnız künye2012Scopus SJRQ1A nondestructive testing technique: Nail penetration test
Selcuk, Levent; Gökce, H. Suleyman; Kayabali, Kamil; Simsek, Osman
This study presents a practical nondestructive testing (NDT) method: the nail penetration test (NPT). The major tools of the test technique are a gas nailer with 130 J (95.88 ft-lbf) power, concrete nails, and a gas nailer cell. The study covers three different limestone aggregate types. Six concrete mixtures were prepared from each aggregate type. Five nail shots were performed on each concrete mixture (or grade) and the average value was obtained. The average nail penetration depths were correlated with the compressive strength of concrete. Other NDT techniques, such as the Schmidt rebound hammer (SRH), ultrasonic pulse velocity (UPV), and Windsor probe (WP), were also applied to concrete samples. The measured compressive strength values were compared with those obtained from the empirical relationships using the data from the NPT, SRH, UPV, and WP. It was found that the reliability of the NPT to estimate the compressive strength of concrete is very high. The tool employed in the investigation covers a relatively wide range of compressive strength of concrete. This testing tool is proposed to estimate the compressive strength of in-place concrete.
AtıfScopus15
İncele
