Sürdürülebilir Kalkınma Amaçları
Yazarlar
Yayınlar
- MakaleAçık Erişim2025Scopus SJRQ2Performance analysis of piezoelectric-based energy harvesting in reinforced concrete buildings under seismic and live loads
Ergün, Mustafa; Uyar, Mehmet; Malgaca, Levent
The demand for autonomous energy solutions in seismic regions is increasing for the uninterrupted operation of structural health monitoring systems. In this context, energy harvesting systems offer a solution for low-power devices, especially in earthquake zones where external energy sources may be interrupted. This study evaluates the energy harvesting capacity of a piezoelectric energy harvesting mechanism placed at specific locations in the columns of a reinforced concrete structure, considering both earthquake and live load conditions. A smart building model is developed by placing sensor modules with piezoelectric material on the columns of a three-story reinforced concrete building. The finite element model of the smart building, which is formed by integrating various technologies and sensors, is created in ANSYS, and specific locations on the columns are selected as sensor points. Dynamic analyses are performed under earthquake conditions by considering seismic records from the Imperial Valley, Erzincan, and Darfield earthquakes. Experimental results of a smart structure with patched piezoelectric material are used to verify the simulation results. The voltage, current, and power responses obtained from the sensor points are examined with the payload effect placed at the end point of the sensor module. When the power values collected from the sensor points are compared, it can be said that the maximum power obtained from the smart building under both earthquake and live load is 0.355 W, while the minimum power value reaches 0.168 W. The results show that the energy harvesting mechanism can provide external power to support electronic devices in regions where earthquake effects are frequent and high. Thus, this study presents an innovative contribution to smart building systems by investigating the energy harvesting potential under earthquake and live loads in a reinforced concrete structure equipped with piezoelectric sensors. The model, validated with numerical and experimental analyses, proposes a sustainable energy source for structural health monitoring systems in seismic regions.
AtıfScopus1WoS1OpenAlex3
İncele - MakaleYalnız künye2024Scopus SJRQ1Dynamic Angular Velocity Load-Based Energy Harvesting Analysis for Different Blade Angles and Polarization Directions of Smart Blades
Uyar, M.
Energy consumption and control of electrical devices in flying electric vehicles with propellers such as drones are important for the continuity of the movement process. With this motivation, the piezoelectric energy harvesting performances of the smart drone propeller and smart wind blades are evaluated in order to obtain electrical energy from lead zirconate titanate (PZT) material placed on the propellers. Initially, the effect of smart wind blades with different blade angles on energy harvesting analysis is examined. The energy harvesting performances of the converse (z polarization) and shearing movements (y polarization) of the PZT material placed on the wind blades are compared under different angular rotational velocities. Then, the power outputs obtained depending on the sensor responses of the smart drone propeller with different resistance gains are evaluated according to the polarization directions. The maximum and minimum power output values obtained from the smart drone propeller at 12,000 rpm rotation velocity are measured as about 0.086 and 0.008 W, respectively. The results show that the energy harvesting performance of the z-polarized smart propeller is more effective than the y polarization, and the amount of energy obtained with the increase in the endpoint vibration amplitudes increases as the rotation speed increases.
AtıfScopus1WoS1OpenAlex1İncele