Sürdürülebilir Kalkınma Amaçları
Yazarlar
Yayınlar
- MakaleYalnız künye2017Scopus SJRQ2Solar Pond Window Technology for Energy-Efficient Retrofitting of Buildings: An Experimental and Numerical Investigation
Cuce, Erdem; Cuce, Pinar Mert
Windows are responsible for an important proportion of heat loss from building envelope due to inadequate insulative characteristics of traditional glazing products. In this respect, advanced glazing solutions are of vital importance to mitigate energy demand of buildings, thus to reduce carbon emissions. Therefore, in this research, a novel glazing technology called solar pond window is introduced, and it is numerically and experimentally investigated for different design configurations. The optimum design of this novel glazing covers four 5-mm-thick glass panes, two 20-mm-thick water layers, and one 20-mm-thick Krypton layer in the middle. The average heat transfer coefficient (U-value) of the optimum case is found to be about 0.40 W/m 2 K. If air is used as insulative gas in the interlayer, the U-value of the glazing is determined to be around 0.90 W/m 2 K, which is still competitive with the U-value range of argon-filled triple-glazed windows with low-e coatings. The fabrication cost of the optimum design of solar pond window is around €120/m 2. Overall, solar pond window technology is a cost-effective and energy-efficient glazing, which has a great potential to be the future of fenestration products as well as being capable of meeting the latest building fabric standards.
AtıfScopus10WoS7OpenAlex9
İncele - Derleme MakaleYalnız künye2016Scopus SJRQ1Vacuum glazing for highly insulating windows: Recent developments and future prospects
Cuce, Erdem; Cuce, Pinar Mert
A comprehensive review of vacuum glazing technology from state-of-the-art developments to future prospects has been presented. The review has been conducted in a thematic way in order to allow an easier comparison, discussion and evaluation of the findings. First, a thorough overview of historical development of vacuum glazing has been given. Then, numerous experimental, theoretical, numerical and simulation works on the scope have been evaluated and the characteristic results from the said works have been analyzed. Commercial vacuum glazing products in market have been assessed in terms of several performance parameters such as overall heat transfer coefficient, visible light transmittance, solar heat gain coefficient and cost. Techno-economic and environmental aspects of vacuum glazing technology have also been discussed. It can be concluded from the results that overall heat transfer coefficient of a vacuum glazing can be reduced up to 0.20 W/m2K through optimized integrations with low-e coatings. The incomparable U-value range of vacuum glazing enables significant mitigation in energy consumption levels and greenhouse gas emissions. Retrofitting 25.6 million homes in the UK with vacuum glazing can provide a carbon abatement of about 40 million tonnes a year, which is very promising.
AtıfScopus138WoS117OpenAlex148İncele - MakaleYalnız künye2011Scopus SJRQ1A new energy saving for the determination of mixing temperature in hot mix asphalts
Yener, Engin; Hinislioglu, Sinan
The equi-viscous temperature range of asphalt has long been used in establishing the mixing temperature for mix designs and field production of hot mix asphalt (HMA). However, this method considers only binder viscosity to determine the mixing temperatures of the aggregate and asphalt. It is well known that depending on the gradation of aggregate and the type of plant and the mixing time. The appropriate mixing temperature for the proper coating may be lower than that of the viscosity based method. The excessive temperature causes the possible performance problems related to the hardening of the asphalt binder and increases the energy consumption, the gas emissions and fumes. In this study, a new method for the determination of asphalt-aggregate mixing temperature which considers the mixture properties was introduced to asphalt industry. The mixing temperatures of different nine mixtures were determined by both conventional and the proposed method. The effects of the nominal maximum aggregate size (NMAS), crushed coarse aggregate ratio (CCAR), the type of gradation, and the grade of binder on the mixing temperature were evaluated with an experimental study. Results show that decreasing NMAS, CCAR and increasing the grade of binder decreased the mixing temperature which is needed for proper coating. In addition, results showed that as going away from restricted zone of the Superpave gradation, the needed temperature to coat the aggregates decreased. The proposed method resulted in lower temperatures comparing to the conventional method on an average of 13°C. This means a possible energy saving of 14.3 x 10 9 kcal or 1362000 kg of crude oil in a year in Turkey. As a result, the new method is recommended due to not only the saving in energy but also decreasing the gas emissions and fume, and possible performance benefits.
AtıfScopus16İncele