Sürdürülebilir Kalkınma Amaçları

• 2

Yazarlar

• Birgul, Recep(1)
• Can, Omer(1)
• Gencel, Osman(1)
• Ozgur Yaman, Ismail(1)
• Tekin, Ilker(1)
• Yilmaz Aruntas, Huseyin(1)
• Çaglar, Arzu(1)
• Çaglar, Hakan(1)

• MakaleYalnız künye2020/r/bayburt/14454
  Graphene Additives Effect on Mechanical and Structural Characterization Properties of Polyvinyl Alcohol (PVA) and Boron Based Cement Mortar

  Çaglar, Hakan; Çaglar, Arzu; Can, Omer

  In this study, it was aimed to develop properties of cement paste having standard properties and produce a graphene doped Polyvinyl Alcohol (PVA) and boron-based cement paste in this context. This type of special cement is mixed with PVA as polymer additive material so it can have a higher strength and sufficient elasticity per unit weight. Also, boric acid which can absorb neutrons having poisonous effect in nuclear reactions is added into the cement in order to minimize environmental disaster caused by a nuclear accident. Compressive and bending strengths were measured based on TSE tests of graphene doped PVA and boron-based cement paste. Then, samples were measured by Brunauer-Emmett-Teller Method (BET) and subjected to X-ray Diffraction (XRD). In XRD measurements, crystalline structure was observed in all materials. According to compressive strength tests, as the graphene amount increases compressive strength also increases, however in bending strength tests as the graphene amount increases bending strength decreases. Although the values of bending strength of samples produced decreased with increase of graphene content, these values were found to be above the standard values. In addition to boron, graphene admixture has a significant effect on material with its positive strength properties.

  • 
  AtıfOpenAlex1

  İncele
• MakaleYayıncıda açık erişim2015Scopus SJRQ1/r/bayburt/13887
  Monitoring macro voids in mortars by computerized tomography method

  Tekin, Ilker; Birgul, Recep; Ozgur Yaman, Ismail; Gencel, Osman; Yilmaz Aruntas, Huseyin

  This study aims to investigate the use of ground pumice powder (PP) in cement production and to monitor void developments in mortars by X-ray Computerized Tomography (CT) which is a nondestructive test method. PP-blended cements were produced by replacing ordinary Portland cement with PP at 0% (control), 5%, 10% and 15% by weight. Paste and mortar specimens were manufactured by these blended cements. Some of the physical and mechanical tests are carried out on these mortar specimens. Experimental results showed that macro void developments in 100-day period for mortars with different PP replacement ratios exhibited different reduction in void ratios.

  • 
  AtıfScopus19·WoS17·OpenAlex19

  İncele