Ayata, Ümit; Esteves, Bruno; Domingos, Idalina; Ferreira, José; Tuncay Efe, Fatih; Türk, Mutlu; Çakicier, Nevzat; Gürleyen, Levent; Peker, Hüseyin

Linden wood is used in the making of musical instruments, agricultural hand tools, and in the furniture sector. In this study, the changes in glossiness (parallel (//) and perpendicular (⊥) to the fibers at 20°, 60°, and 85°, the pull-off adhesion test, color parameters (CIEL) and pendulum hardness (König method) of two different UV curable varnishes applied to linden (Tilia tomentosa Moench.) according to industrial application techniques and exposed to artificial weathering were investigated. According to the research results, while L*, ΔH*, and h° decreased with increasing weathering time in both varnish layers, ΔC*, b*, ΔE*, a*, and C* rose. The pendulum hardness grew for Method B but dwindled for Method A. A decrease was found in the adhesion tests for both varnish methods after artificial weathering. The glossiness was generally reduced due to artificial weathering for all the angles and for both directions, with the exception of 85º in Method A. The variance analysis and homogeneity groups showed that the changes in the adhesion, pendulum hardness, L*, a*, h°, C*, perpendicular and parallel to the fibers for 60° and 85° were found to be significantly different with artificial weathering for both methods.

AtıfScopus1·WoS1·OpenAlex1

İncele

Ayata, Ümit; Efe, Fatih Tuncay; Gürleyen, Levent; Çakıcıer, Nevzat; Türk, Mutlu

In this study, some surface changes were investigated in Russian olive (Elaeagnus angustifolia L.) wood with UV system parquet varnish (3 and 5 layers) applied indoors, after exposure to artificial aging environments with different lamps. UV-A 340 and UV-B 313 type lamps were used in the aging application. Experimental samples were exposed to 252 hours of aging. In addition, tests of color parameters [(red color (a*) tone, yellow color (b*) tone and lightness (L*)] and pendulum hardness values were performed on aged and unaged varnish layers. According to the results of the research, statistical analysis of variance results were obtained for all tests in both varnish types and both lamp types. After the layers of both varnish types were exposed to 252 hours of aging of both lamp types, L* and b* values decreased while a* values increased. It was determined that the total color difference results of UV-B 313 lamps in both varnish types were higher than that of UV-A 340 lamps. Pendulum hardness values gave different results against different lamps.

AtıfOpenAlex2·TR Dizin1

İncele

Ayata, Ümit; Türk, Mutlu

Today, there are patented heat treatment methods using different methods in various countries. One of these methods is the ThermoWood method. It is a known fact that many properties of wood (mechanical, physical, chemical, biological, etc.) change as a result of the change in the structure of wood with heat treatment. At the beginning of these features, the concept of hardness emphasizes an important issue for wood. In this study, the Shore D hardness values of maple, common alder, rowanberry, chestnut, hornbeam, Uludağ fir, willow, Strendzha Oak, and ash woods that occur at 212oC for 1 and 2 hours after and before heat treatment were investigated according to the ThermoWood method. According to the results of the research, variance analysis results were obtained as significant. The highest reduction rate among wood species was obtained in Uludağ fir, which was heat-treated at 212oC for 2 hours, while the lowest was determined in common hornbeam wood, which was heat-treated at 212oC for 1 hour. It was determined that the hardness values of all tree species decreased with heat treatment. In addition, it was shown that the results decreased with the increase of the heat treatment time.

AtıfOpenAlex2·TR Dizin2

İncele

Ayata, Ümit; Esteves, Bruno; Gürleyen, Levent; Çakicier, Nevzat; Ferreira, J.O.S.É.; Domingos, Idalina; Türk, Mutlu

The importance of UV-curable coatings is currently increasing. In the parquet industry, where UV systems are applied, it is beneficial to investigate new tree species as potential raw materials. This study was carried out to determine the effect of accelerated ageing on some surface properties of hackberry (Celtis australis L.) wood treated with UV system parquet varnish. UV system parquet varnishes were applied to hackberry wood surfaces in three and five layers, according to the requirements of industrial applications. The varnished surfaces were then exposed to UV rays for 252 and 504 h using UVA-340 lamps in a QUV ageing device. Glossiness, colour parameters, pendulum hardness and adhesion strength (pull-off) (MPa) were determined for the coated samples before and after ageing, and the results for the aged and unaged test samples were compared. Analysis of variance showed that the results were significant for all tests. The results for all tests varied by ageing time.

AtıfScopus5·WoS4·OpenAlex3

İncele