Yaylacı, Murat; Öner, Erdal; Adıyaman, Gökhan; Öztürk, Şevval; Uzun Yaylacı, Ecren; Birinci, Ahmet

Contact mechanics analysis is crucial because such problems often arise in engineering practice. When examining contact mechanics, the material property of the contacting components is a crucially significant aspect. It is more complex to solve the contact mechanics of systems that are composed of materials that do not have a homogenous structure compared to materials that have homogeneous qualities throughout. While many studies on contact problems with homogeneous materials exist, those involving non-homogeneous materials are scarce in the literature. As material technology improves fast, there will be a greater need to solve such problems. In this respect, analytical and finite element method (FEM) solutions of the continuous and discontinuous contact problems of a functionally graded (FG) layer are carried out in this article. The FG layer in the problem rests on a rigid foundation and is pressed with a rigid punch. From the solutions, the contact length, contact stress, initial separation distance, and beginning and ending points of separation were determined, and the results were compared. It has been concluded that the FEM findings are consistent with the analytical results to a satisfactory degree. This study analyzes contact problem using different approaches and accounts for the influence of body force in a contact geometry that has yet to be reported.

AtıfScopus79·WoS83·OpenAlex68

İncele

Öner, Erdal; Şengül Şabano, Bahar; Uzun Yaylacı, Ecren; Adıyaman, Gökhan; Yaylacı, Murat; Birinci, Ahmet

The frictionless double receding contact problem for two functionally graded (FG) layers pressed by a uniformly distributed load is addressed in this paper. The gradation in the layers is assumed to follow an exponential variation through the height with constant Poisson's ratios. The lower layer rests on a homogeneous half-plane (HP). There is no adhesion between the FG layers or between the lower layer and the HP. The body forces of the FG layers and HP are ignored. First, the governing equations are reduced to a system of two singular integral equations with contact pressures and contact lengths as unknowns using Fourier transform techniques and boundary conditions. The integral equations are solved numerically using the Gauss-Chebyshev integration formula. Then, a parametric finite element analysis is performed using the augmented contact method. Finally, the problem was extended based on the multilayer perceptron (MLP), an artificial neural network used for different problem parameters. The effects of stiffness parameters, the normalized load length, the ratio of shear moduli, the ratio of FG layer heights to the normalized contact lengths, and normalized maximum contact pressures are explored. The results of finite element analysis and the MLP approach are used to validate the normalized maximum contact pressures and contact lengths obtained from an analytical method based on elasticity theory, and finally, good agreement between these three methods results is obtained. The obtained results could help in designing multibody indentation systems with FGMs.

AtıfScopus85·WoS84·OpenAlex48

İncele

Yaylacı, Murat; Adıyaman, Gökhan; Öner, Erdal; Birinci, Ahmet

The aim of this paper was to examine the continuous and discontinuous contact problems between the functionally graded (FG) layer pressed with a uniformly distributed load and homogeneous half plane using an analytical method and FEM. The FG layer is made of non-homogeneous material with an isotropic stress–strain law with exponentially varying properties. It is assumed that the contact at the FG layer-half plane interface is frictionless, and only the normal tractions can be transmitted along the contacted regions. The body force of the FG layer is considered in the study. The FG layer was positioned on the homogeneous half plane without any bonds. Thus, if the external load was smaller than a certain critical value, the contact between the FG layer and half plane would be continuous. However, when the external load exceeded the critical value, there was a separation between the FG layer and half plane on the finite region, as discontinuous contact. Therefore, there have been some steps taken in this study. Firstly, an analytical solution for continuous and discontinuous contact cases of the problem has been realized using the theory of elasticity and Fourier integral transform techniques. Then, the problem modeled and two-dimensional analysis was carried out by using ANSYS package program based on FEM. Numerical results for initial separation distance and contact stress distributions between the FG layer and homogeneous half plane for continuous contact case; the start and end points of separation and contact stress distributions between the FG layer and homogeneous half plane for discontinuous contact case were provided for various dimensionless quantities including material inhomogeneity, distributed load width, the shear module ratio and load factor for both methods. The results obtained using FEM were compared with the results found using analytical formulation. It was found that the results obtained from analytical formulation were in perfect agreement with the FEM study.

AtıfScopus78·WoS78·OpenAlex21

İncele

Yaylacı, Murat; Eyüboğlu, Ayşegül; Adıyaman, Gökhan; Yaylacı, Ecren Uzun; Öner, Erdal; Birinci, Ahmet

This paper presents a comparative study of different methods, such as the analytical method, finite element method (FEM), and multilayer perceptron (MLP) for analyzing a frictionless receding contact problem. The problem consists of two layers resting on a Winkler foundation. The top layer is functionally graded (FG) along the depth and pressed using a rigid cylindrical stamp, whereas the bottom layer is homogeneous. We assumed that the contact between the two layers, and that between the FG layer and the rigid cylindrical stamp are frictionless; additionally, compressive normal tractions can be transmitted through the interface. First, the problem was solved analytically using the theory of elasticity and integral transform techniques. Second, the finite element solution of the problem was obtained using ANSYS software. Finally, the problem was extended based on the MLP, which an artificial neural network used for different problem parameters. The results of this study showed that the variations in the contact lengths at the interface between the rigid cylindrical stamp and the FG layer, those between the homogeneous layer and the FG layer, and the maximum contact pressures at these interfaces depended on various dimensionless quantities such as the stamp radius, stiffness parameter, shear modulus ratio, and elastic spring constant ratio. We observed that the results obtained with the three different methods, namely the analytical method, FEM, and MLP, are extremely compatible with each other, thus proving the accuracy of these results.

AtıfScopus87·WoS86·OpenAlex40

İncele

Yaylacı, Murat; Adıyaman, Gökhan; Öner, Erdal; Birinci, Ahmet

In this study, the continuous and discontinuous contact problems of functionally graded (FG) layer resting on a rigid foundation were considered. The top of the FG layer was loaded by a distributed load. It was assumed that the shear modulus and the density of the layer varied according to exponential functions along the depth whereas the the Poisson ratio remained constant. The problem first was solved analytically and the results were verified with the ones obtained from finite element (FE) solution. In analytical solution, the stress and displacement components for FG layer were obtained by the help of Fourier integral transform. Critical load expression and integral equation for continuous and discontinuous contact, respectively, using corresponding boundary conditions in each case. The finite element solution of the problem was carried out using ANSYS software program. In continuous contact case, initial separation distance and contact stresses along the contact surface between the FG layer and the rigid foundation were examined. Separation distances and contact stresses were obtained in case of discontinuous contact. The effect of material properties and loading were investigated using both analytical and FE solutions. It was shown that obtained results were compatible with each other.

AtıfScopus71·WoS72·OpenAlex22

İncele

Adıyaman, Gökhan; Öner, Erdal; Birinci, Ahmet

In this study, the continuous and discontinuous contact problem of a functionally graded (FG) layer resting on a rigid foundation is considered. The top of the FG layer is subjected to normal tractions over a finite segment. The graded layer is modeled as a non-homogenous medium with a constant Poissons’ ratio and exponentially varying shear modules and density. For continuous contact, the problem was solved analytically using plane elasticity and integral transform techniques. The critical load that causes first separation and contact pressures is investigated for various material properties and loadings. The problem reduced to a singular integral equation using plane elasticity and integral transform techniques in case of discontinuous contact. The obtained singular integral equation is solved numerically using Gauss–Jacobi integral formulation, and an iterative scheme is employed to obtain the correct separation distance. The separation distance and contact pressures between the FG layer and the foundation are analyzed for various material properties and loading. The results are shown in Tables and Figures. It is seen that decreasing stiffness and density at the top of the layer result in an increment in both critical load in case of continuous contact and separation distance in case of discontinuous contact.

AtıfScopus24·WoS24·OpenAlex26

İncele

Adıyaman, Gökhan; Birinci, Ahmet; Öner, Erdal; Yaylacı, Murat

In this paper, the plane problem of a frictionless receding contact between an elastic functionally graded layer and two homogeneous quarter planes is considered when the graded layer is pressed against the quarter planes. The top of the layer is subjected to normal tractions over a finite segment. The graded layer is modeled as a non-homogeneous medium with a constant Poisson’s ratio and exponentially varying shear modules. The problem is converted into the solution of a Cauchy-type singular integral equation in which the contact pressure and the receding contact half-length are the unknowns using integral transforms. The singular integral equation is solved numerically using Gauss–Jacobi integration. The corresponding receding contact half-length that satisfies the global equilibrium condition is obtained using an iterative procedure. The effect of the material non-homogeneity parameter on the contact pressure and on the length of the receding contact is investigated.

AtıfScopus58·WoS55·OpenAlex42

İncele

Birinci, Ahmet; Adıyaman, Gökhan; Yaylacı, Murat; Öner, Erdal

In this paper, continuous and discontinuous cases of a contact problem for two elastic layers supported by a Winkler foundation are analyzed using both analytical method and finite element method. In the analyses, it is assumed that all surfaces are frictionless, and only compressive normal tractions can be transmitted through the contact areas. Moreover, body forces are taken into consideration only for layers. Firstly, the problem is solved analytically using theory of elasticity and integral transform techniques. Then, the finite element analysis of the problem is carried out using ANSYS software program. Initial separation distances between layers for continuous contact case and the size of the separation areas for discontinuous contact case are obtained for various dimensionless quantities using both solutions. In addition, the normalized contact pressure distributions are calculated for both cases. The analytic results are verified by comparison with finite element results. Finally, conclusions are presented.

AtıfScopus38·WoS39·OpenAlex36

İncele