Sürdürülebilir Kalkınma Amaçları
Yayınlar
- MakaleYalnız künye2017Scopus SJRQ3Gaz türbinli kojenerasyon tesislerinin performans analizleri
Karaali, Rabi; Öztürk, İlhan Tekin
In this study, some improving methods of gas turbine cogeneration cycles are applied on a simple cogeneration cycle. These methods are preheating air, preheating air and fuel, inlet air cooling by using evaporative cooling and absorption cooling. These cogeneration systems are evaluated with respect to energy efficiency (energy utilization factor), exergetic efficiency, electric and heat power, electric-heat energy rate, artificial thermal efficiency and fuel energy saving ratio and are compared with each other. In these analyses, the thermodynamic parameters such as compressing ratio, air and fuel mass ratio and compressor inlet temperatures of the cycles are used. It is concluded that these parameters can be listed from most effective to least effective as air fuel ratio, pressure ratio and compressor inlet temperature. It is also concluded that the most efficient cycle is found to be the air-fuel preheated cycle for obtaining more electric power and less heat power, and the simple cycle is the most suitable one for obtaining more heat power and less electric power
AtıfTR Dizin1
İncele - MakaleAçık Erişim2017Scopus SJRQ2Efficiency improvement of gas turbine cogeneration systems; [Poboljšanje učinkovitosti kogeneracijskih sustava plinske turbine]
Karaali, Rabi; Öztürk, İlhan Tekin
In this study eight methods are evaluated for a gas turbine cogeneration cycle to improve the efficiency. These methods are increasing gas turbine inlet air temperature, cooling the inlet air of the compressor, air preheating, fuel preheating, increasing compressor inlet air pressure, increasing air excess rates, steam injection, and humidification of the inlet air of the compressor. These methods are studied in order to compare their effects on the performance of the systems. The effects of these methods on the exergetic efficiency depend on the kind of the cogeneration cycle. By combining recuperation, preheating fuel and steam injection methods high efficiency can be achieved. The combined methods give the best results under variable heat demands of the market. An appropriate combination of the efficiency improvement methods may increase the exergetic efficiency about 20 %. The results show that efficiency improvement methods must be applied together whenever it is possible.
AtıfScopus8WoS6OpenAlex15
İncele - MakaleYalnız künye2015Thoermodynamic Analyses of Steam Injected Gas Turnine Cogeneration Cycles
Karaali, Rabi; Öztürk, İlhan Tekin
In this study, air preheating, air-fuel preheating and simple cycles where steam injected in to combustion chamber are analyzed. The effects of steam injection on thermodynamic performance are calculated and obtained for the three different gas turbine cogeneration systems. Simulation programs written by the authors in FORTRAN code are obtained for the analyses by applying the first law of thermodynamics and the exergy analysis method. Thermodynamic performance of these three different cycles for variable mass of injected steam and different stages are obtained and compared with the results of the literature. The effects of injection steam into combustion chambers of those three cycles for variable compressing ratios, on power, efficiencies and performance are obtained. Consequently, the advantages and the disadvantages of injection steam are evaluated and all results of this study are compared with the literature. Injection steam into combustion chamber increases the electricity power and the electricity efficiency but decreases the heat power of the cycles.