The effects of silica fume and fly ash on the scaling resistance and flexural strength of pavement concretes

MakaleAçık ErişimScopus SJRQ3
  • SDG 9 · Sanayi, Yenilikçilik ve Altyapı

Özet

The purpose of this study is to investigate the effects of Silica Fume (SF) and Fly Ash (FA) additives on the frost salt scaling resistance and flexural strength properties of pavement concrete. An attempt is also made to attain a more durable and higher strength concrete by a suitable combination of Ordinary Portland Cement (OPC), SF and FA. SF and FA are used as cement replacement in proportions of 0, 5, 10% and 0, 5, 10, 15% by weight respectively. Flexural strength is tested after 7, 28 and 91 days of the lime saturated water curing period. The experimental results indicate that using FA only decreases while SF only slightly increases 28-days flexural strength. On the other hand, using SF and FA together shows relatively more strength gain. Among all those tested, maximum 28 days flexural strength of 4.53 MPa is obtained for the mix proportions of 85% OPC + 10% FA and 5% SF. SF significantly decreases the amount of liquid absorption by capillary suction and has a significant effect on the scaling resistance. In addition, all the ternary mixtures showes better scaling resistance than the control mixture with 100% OPC.

Anahtar Kelimeler

RDL Kalıcı Bağlantı (PID)
https://rdlopen.rawdatalibrary.net/r/bayburt/14008Resmi atıflarda kullanılan kalıcı adres
İndeks kayıtları
Kaydın indeks veri tabanlarındaki sayfası (aktarımda alınan kayıt numarasıyla). Erişim, indeksin kendi koşullarına bağlıdır.
Atıflar
Scopus
9
OpenAlex
25
Her kaynağın kendi saydığı toplam atıf; aktarım ve zenginleştirme sırasında alındı.
Tam Kayıt
AlanDeğerDil
dc.contributor.authorYener, Engin
dc.contributor.authorHinislioğlu, Sinan
dc.date.accessioned2026-10-29T19:11:46.360490982Z
dc.date.available2026-10-29T19:11:46.360490982Z
dc.date.issued2011
dc.description.abstractThe purpose of this study is to investigate the effects of Silica Fume (SF) and Fly Ash (FA) additives on the frost salt scaling resistance and flexural strength properties of pavement concrete. An attempt is also made to attain a more durable and higher strength concrete by a suitable combination of Ordinary Portland Cement (OPC), SF and FA. SF and FA are used as cement replacement in proportions of 0, 5, 10% and 0, 5, 10, 15% by weight respectively. Flexural strength is tested after 7, 28 and 91 days of the lime saturated water curing period. The experimental results indicate that using FA only decreases while SF only slightly increases 28-days flexural strength. On the other hand, using SF and FA together shows relatively more strength gain. Among all those tested, maximum 28 days flexural strength of 4.53 MPa is obtained for the mix proportions of 85% OPC + 10% FA and 5% SF. SF significantly decreases the amount of liquid absorption by capillary suction and has a significant effect on the scaling resistance. In addition, all the ternary mixtures showes better scaling resistance than the control mixture with 100% OPC.
dc.identifier.doi10.1080/14680629.2011.9690358
dc.identifier.endpage194
dc.identifier.issn1468-0629
dc.identifier.issue1
dc.identifier.scopus2-s2.0-85008755291
dc.identifier.startpage177
dc.identifier.urihttps://rdlopen.rawdatalibrary.net/r/bayburt/14008
dc.identifier.volume12
dc.language.isoen
dc.relation.ispartofRoad Materials and Pavement Design
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectConcrete pavement
dc.subjectDurability
dc.subjectFlexural strength
dc.subjectFly ash
dc.subjectFrost and deicing salt resistance
dc.subjectSilica fume
dc.titleThe effects of silica fume and fly ash on the scaling resistance and flexural strength of pavement concretes
dc.typeArticle
rdl.citation.openalex25
rdl.citation.scopus9
rdl.oa.statusclosed
rdl.oa.statusgreen
rdl.oa.urlhttps://hdl.handle.net/20.500.12403/8348
rdl.scopus.quartileQ3
rdl.sdgSDG09
rdl.source.indexSCOPUS