Bayburt ÜniversitesiBayburt ÜniversitesiAçık Erişim Arşivi · RDL Open

Modification of eutectic Al-Si alloys by Sr and CuSn5

MakaleAçık ErişimScopus SJRQ2

Özet

Enhanced properties can be achieved in Al-Si alloys by several alloying element additions. Typical modifiers are Na, Sr, and Sb that alters Si into a fibrous structure. Fluidity and mechanical properties increase as well as machinability can be improved. In this work, eutectic Al-Si alloy was modified with Al10Sr, CuSn5, and Al10Sr + CuSn5 master alloys. Microstructural characterization was carried out by optical and scanning electron microscopy. Density and hardness of the samples were measured. Wear tests were carried out. It was found that Sr modified Al12Si revealed better performance than CuSn modified.

Anahtar Kelimeler

Al-Si eutecticmodificationwear resistance
RDL Kalıcı Bağlantı (PID)
https://rdlopen.rawdatalibrary.net/r/bayburt/13283Resmi atıflarda kullanılan kalıcı adres
DOI
https://doi.org/10.1088/2053-1591/ab3c0fYayıncı resmi DOI adresi
İndeks kayıtları
ScopusScopusWeb of ScienceWeb of Science
Kaydın indeks veri tabanlarındaki sayfası (aktarımda alınan kayıt numarasıyla). Erişim, indeksin kendi koşullarına bağlıdır.
Atıflar
Scopus
21
WoS
19
OpenAlex
21
Her kaynağın kendi saydığı toplam atıf; aktarım ve zenginleştirme sırasında alındı.
Tam Kayıt
AlanDeğerDil
dc.contributor.authorÇolak, Murat
dc.date.accessioned2026-10-29T19:10:44.321480957Z
dc.date.available2026-10-29T19:10:44.321480957Z
dc.date.issued2019
dc.description.abstractEnhanced properties can be achieved in Al-Si alloys by several alloying element additions. Typical modifiers are Na, Sr, and Sb that alters Si into a fibrous structure. Fluidity and mechanical properties increase as well as machinability can be improved. In this work, eutectic Al-Si alloy was modified with Al10Sr, CuSn5, and Al10Sr + CuSn5 master alloys. Microstructural characterization was carried out by optical and scanning electron microscopy. Density and hardness of the samples were measured. Wear tests were carried out. It was found that Sr modified Al12Si revealed better performance than CuSn modified.
dc.identifier.articlenumber1065A2
dc.identifier.doi10.1088/2053-1591/ab3c0f
dc.identifier.eissn2053-1591
dc.identifier.issn2053-1591
dc.identifier.issue10
dc.identifier.scopus2-s2.0-85072121302
dc.identifier.urihttps://rdlopen.rawdatalibrary.net/r/bayburt/13283
dc.identifier.volume6
dc.identifier.wosWOS:000484129300002
dc.language.isoen
dc.publisherInstitute of Physics Publishing
dc.relation.ispartofMaterials Research Express
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectAl-Si eutectic
dc.subjectmodification
dc.subjectwear resistance
dc.subject.classificationMaterials Science, Multidisciplinary
dc.subject.classificationMaterials Science
dc.subject.otherAlloying elements
dc.subject.otherAluminum alloys
dc.subject.otherBinary alloys
dc.subject.otherCopper alloys
dc.subject.otherEutectics
dc.subject.otherScanning electron microscopy
dc.subject.otherStrontium
dc.subject.otherTin alloys
dc.subject.otherWear of materials
dc.subject.otherWear resistance
dc.subject.otherAl-Si alloy
dc.subject.otherAl-Si eutectic
dc.subject.otherEnhanced properties
dc.subject.otherEutectic Al-Si alloys
dc.subject.otherFibrous structures
dc.subject.otherMaster alloys
dc.subject.otherMicro-structural characterization
dc.subject.othermodification
dc.subject.otherSilicon alloys
dc.titleModification of eutectic Al-Si alloys by Sr and CuSn5
dc.typeArticle
rdl.citation.openalex21
rdl.citation.scopus21
rdl.citation.wos19
rdl.oa.statusclosed
rdl.oa.statusgreen
rdl.oa.urlhttp://hdl.handle.net/20.500.12403/3500
rdl.scopus.quartileQ2
rdl.source.indexSCOPUS
rdl.source.indexWOS
rdl.wos.indexScience Citation Index Expanded (SCI-EXPANDED)