Bayburt ÜniversitesiBayburt ÜniversitesiAçık Erişim Arşivi · RDL Open

Characterization of properties of Vanadium, Boron and Strontium addition on HPDC of A360 alloy

MakaleAçık ErişimScopus SJRQ2

Özet

The demand for lighter weight decreased thickness and higher strength has become the focal point in the automotive industry. In order to meet such requirements, the addition of several alloying elements has been started to be investigated. In this work, the additions of V, B, and Sr on feedability and tensile properties of A360 has been studied. A mold design that consisted of test bars has been produced. Initially, a simulation was carried out to optimize the runners, filling, and solidification parameters. Following the tests, it was found that V addition revealed the highest UTS but low elongation at fracture, while B addition exhibited visa verse. On the other hand, impact energy was higher with B additions.

Anahtar Kelimeler

A360BHPDCMechanical propertiesSrV
RDL Kalıcı Bağlantı (PID)
https://rdlopen.rawdatalibrary.net/r/bayburt/13233Resmi atıflarda kullanılan kalıcı adres
İndeks kayıtları
ScopusScopusWeb of ScienceWeb of Science
Kaydın indeks veri tabanlarındaki sayfası (aktarımda alınan kayıt numarasıyla). Erişim, indeksin kendi koşullarına bağlıdır.
Atıflar
Scopus
13
WoS
12
OpenAlex
14
Her kaynağın kendi saydığı toplam atıf; aktarım ve zenginleştirme sırasında alındı.
Tam Kayıt
AlanDeğerDil
dc.contributor.authorGursoy, Ozen
dc.contributor.authorColak, Murat
dc.contributor.authorTur, Kazim
dc.contributor.authorDispinar, Derya
dc.date.accessioned2026-10-29T19:10:40.704550642Z
dc.date.available2026-10-29T19:10:40.704550642Z
dc.date.issued2021
dc.description.abstractThe demand for lighter weight decreased thickness and higher strength has become the focal point in the automotive industry. In order to meet such requirements, the addition of several alloying elements has been started to be investigated. In this work, the additions of V, B, and Sr on feedability and tensile properties of A360 has been studied. A mold design that consisted of test bars has been produced. Initially, a simulation was carried out to optimize the runners, filling, and solidification parameters. Following the tests, it was found that V addition revealed the highest UTS but low elongation at fracture, while B addition exhibited visa verse. On the other hand, impact energy was higher with B additions.
dc.description.sponsorshipIstanbul Teknik Üniversitesi, IT, (MOA-2019-42309)
dc.description.sponsorshipIstanbul Teknik Üniversitesi, IT
dc.identifier.articlenumber124931
dc.identifier.doi10.1016/j.matchemphys.2021.124931
dc.identifier.eissn1879-3312
dc.identifier.issn0254-0584
dc.identifier.scopus2-s2.0-85109492553
dc.identifier.urihttps://rdlopen.rawdatalibrary.net/r/bayburt/13233
dc.identifier.volume271
dc.identifier.wosWOS:000683020500002
dc.language.isoen
dc.publisherElsevier Ltd
dc.relation.ispartofMaterials Chemistry and Physics
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectA360
dc.subjectB
dc.subjectHPDC
dc.subjectMechanical properties
dc.subjectSr
dc.subjectV
dc.subject.classificationMaterials Science, Multidisciplinary
dc.subject.classificationMaterials Science
dc.subject.otherAutomotive industry
dc.subject.otherBoron
dc.subject.otherStrontium
dc.subject.otherTensile strength
dc.subject.otherVanadium
dc.subject.otherA360
dc.subject.otherB
dc.subject.otherBoron additions
dc.subject.otherHPDC
dc.subject.otherMechanical
dc.subject.otherProperty
dc.subject.otherSr
dc.subject.otherStrontium addition
dc.subject.otherV
dc.subject.otherVanadium addition
dc.subject.otherAlloying elements
dc.titleCharacterization of properties of Vanadium, Boron and Strontium addition on HPDC of A360 alloy
dc.typeArticle
rdl.citation.openalex14
rdl.citation.scopus13
rdl.citation.wos12
rdl.oa.statusclosed
rdl.oa.statusgreen
rdl.oa.urlhttp://hdl.handle.net/20.500.12403/3080
rdl.scopus.quartileQ2
rdl.source.indexSCOPUS
rdl.source.indexWOS
rdl.wos.indexScience Citation Index Expanded (SCI-EXPANDED)