Sürdürülebilir Kalkınma Amaçları

• 1

• MakaleAçık Erişim2025Scopus SJRQ2/r/bayburt/12753
  Microstructure and Mechanical Properties Change of Al7SiMgxEr (x: 0.03–0.1)

  Colak, Murat; Muhammed, Enes Aydin; Turkmen, Mustafa; Dispinar, Derya

  Aluminum and its alloys are widely used in many fields, such as automotive, aerospace, and defense industries, due to their many advantages. Due to such critical applications, the quality demands are also increasing. With the recent development in technologies, studies on casting of aluminum with different alloying element additions are ongoing rapidly. Various elements are added to the alloy to provide the desired properties. In this study, the effects of 0.03, 0.06, and 0.1 wt% Er addition to A356 aluminum alloy were evaluated simply because in the literature, only 0.1 wt% and above additions were studied. Samples were prepared using permanent molds and subjected to mechanical testing and microstructural characterization. Changes in the microstructure (evaluated via SDAS and SDAL) and mechanical properties of the cast specimens were analyzed. The results showed that Er addition improved tensile strength by up to 30%, increased elongation fourfold, and enhanced toughness by a factor of 4.5.

  İncele
• Derleme MakaleAçık Erişim2024Scopus SJRQ2/r/bayburt/12863
  Review of In Situ Detection and Ex Situ Characterization of Porosity in Laser Powder Bed Fusion Metal Additive Manufacturing

  Aydogan, Beytullah; Chou, Kevin

  Over the past decade, significant research has focused on detecting abnormalities in metal laser powder bed fusion (L-PBF) additive manufacturing. Effective online monitoring systems are crucial for enhancing process stability, repeatability, and the quality of final components. Therefore, the development of in situ detection mechanisms has become essential for metal L-PBF systems, making efficient closed-loop control strategies to adjust process parameters in real time vital. This paper presents an overview of current in situ monitoring systems used in metal L-PBF, complemented by ex situ characterizations. It discusses in situ techniques employed in L-PBF and evaluates the applicability of commercial systems. The review covers optical, thermal, acoustic, and X-ray in situ methods, along with destructive and non-destructive ex situ methods like optical, Archimedes, and X-ray characterization techniques. Each technique is analyzed based on the sensor used for defect detection and the type or size of defects. Optical in situ monitoring primarily identifies large defects from powder bed abnormalities, while thermal methods detect defects as small as 100 µm and keyholes. Thermal in situ detection techniques are notable for their applicability to commercial devices and efficacy in detecting subsurface defects. Computed tomography scanning excels in locating porosity in 3D space with high accuracy. This study also explores the advantages of multi-sensor in situ techniques, such as combining optical and thermal sensors, and concludes by addressing current research needs and potential applications of multi-sensor systems.

  • 
  AtıfScopus23·WoS22·OpenAlex28

  İncele
• MakaleAçık Erişim2019Scopus SJRQ2/r/bayburt/12114
  Determination of acceptable quality limit for casting of a356 aluminium alloy: Supplier’s quality index (SQI)

  Erzi, Eray; Gürsoy, Özen; Yüksel, Çağlar; Colak, Murat; Dispinar, Derya

  Aluminium and its alloys have been widely used in the automotive industry for some time and A356 is one of the most popular aluminium alloys today in the sector. It contains approximately 7 wt.% Si and 0.3 wt.% Mg. Due to the defects that may be present in the cast parts, expected mechanical properties may not be reached and this alloy may perform in service under its potential. In a low pressure die casting, several precautions have to be taken in order to produce high quality and defect-free castings. Temperature of casting and the schemical composition of the melt is recorded continuously. Die temperature, pressure levels and their durations are optimized; degassing and fluxing operations are performed. Yet, regardless of the precautions, there could still be rejected parts. It is becoming clear that a good quality raw material is one of the most underrated points of the industry and that the starting material has a great effect on the final product and it should be taken in to account more seriously. Therefore, regarding the first rule of Campbell’s 10 Rules of Casting, in this study, the quality of the starting material of supply chains for a wheel manufacturer was investigated. Chemical compositions were compared, fluidity tests, mechanical tests and bifilm indexes of these various sources and ingots were measured and a final quality index was proposed to create a reference for the quantification of quality of supplier’s ingots. This new index was compared with the rejection rates.

  AtıfScopus40·WoS33·OpenAlex39

  İncele