Bayburt ÜniversitesiBayburt ÜniversitesiAçık Erişim Arşivi · RDL Open

A novel internal curing method for 3D-printed geopolymer structures reinforced with a steel cable: Electro-heating

MakaleAçık ErişimScopus SJRQ2
  • SDG 9 · Sanayi, Yenilikçilik ve Altyapı

Özet

Buildability and structural integrity are the inherent challenges of 3D printed geopolymer structures needed to be overcome. Reinforcing with steel cable ensuring a higher structural integrity of the printed structure can simultaneously improve the buildability due to the heating capability of this component. The controllable instant heating capability of steel cable was achieved by the use of a specific circuit system in the study. As a novel internal curing technique, electro-heating is recommended in the additive manufacturing of steel cable-reinforced geopolymer structures by the authors.

Anahtar Kelimeler

3D printingComposite materialsElectro-heatingGeopolymersInternal curingSteel cable reinforcement
RDL Kalıcı Bağlantı (PID)
https://rdlopen.rawdatalibrary.net/r/bayburt/11977Resmi atıflarda kullanılan kalıcı adres
İndeks kayıtları
ScopusScopusWeb of ScienceWeb of Science
Kaydın indeks veri tabanlarındaki sayfası (aktarımda alınan kayıt numarasıyla). Erişim, indeksin kendi koşullarına bağlıdır.
Atıflar
Scopus
4
WoS
3
OpenAlex
5
Her kaynağın kendi saydığı toplam atıf; aktarım ve zenginleştirme sırasında alındı.
Tam Kayıt
AlanDeğerDil
dc.contributor.authorGökçe, H.S.
dc.contributor.authorGüngör, O.
dc.contributor.authorÖksüzer, N.
dc.date.accessioned2026-10-29T19:09:02.395884195Z
dc.date.available2026-10-29T19:09:02.395884195Z
dc.date.issued2022
dc.description.abstractBuildability and structural integrity are the inherent challenges of 3D printed geopolymer structures needed to be overcome. Reinforcing with steel cable ensuring a higher structural integrity of the printed structure can simultaneously improve the buildability due to the heating capability of this component. The controllable instant heating capability of steel cable was achieved by the use of a specific circuit system in the study. As a novel internal curing technique, electro-heating is recommended in the additive manufacturing of steel cable-reinforced geopolymer structures by the authors.
dc.identifier.articlenumber131364
dc.identifier.doi10.1016/j.matlet.2021.131364
dc.identifier.eissn1873-4979
dc.identifier.issn0167-577X
dc.identifier.scopus2-s2.0-85120806255
dc.identifier.urihttps://rdlopen.rawdatalibrary.net/r/bayburt/11977
dc.identifier.volume309
dc.identifier.wosWOS:000736677900001
dc.language.isoen
dc.publisherElsevier B.V.
dc.relation.ispartofMaterials Letters
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subject3D printing
dc.subjectComposite materials
dc.subjectElectro-heating
dc.subjectGeopolymers
dc.subjectInternal curing
dc.subjectSteel cable reinforcement
dc.subject.classificationMaterials Science, Multidisciplinary
dc.subject.classificationPhysics, Applied
dc.subject.classificationMaterials Science
dc.subject.classificationPhysics
dc.subject.other3D printers
dc.subject.otherCables
dc.subject.otherCuring
dc.subject.otherGeopolymers
dc.subject.otherHeating
dc.subject.otherInorganic polymers
dc.subject.other3-D printing
dc.subject.other3D-printing
dc.subject.otherComposites material
dc.subject.otherCuring methods
dc.subject.otherElectro-heating
dc.subject.otherGeopolymer
dc.subject.otherInternal curing
dc.subject.otherPrinted structures
dc.subject.otherSteel cable
dc.subject.otherSteel cable reinforcement
dc.subject.otherReinforcement
dc.titleA novel internal curing method for 3D-printed geopolymer structures reinforced with a steel cable: Electro-heating
dc.typeArticle
rdl.citation.openalex5
rdl.citation.scopus4
rdl.citation.wos3
rdl.oa.statusclosed
rdl.oa.statusgreen
rdl.oa.urlhttp://hdl.handle.net/20.500.12403/2922
rdl.scopus.quartileQ2
rdl.sdgSDG09
rdl.source.indexSCOPUS
rdl.source.indexWOS
rdl.wos.indexScience Citation Index Expanded (SCI-EXPANDED)