Numerical investigation of the Mode I/Mode II fracture behavior of the hybrid composite joints with a hybrid bondline

In this study, the fracture behavior of fracture characterization bonded joints consisting of hybrid composite adherends and hybrid bondlines under Mode I and Mode II loadings were investigated numerically. Numerical analysis was performed using LS-DYNA. Hybrid composite laminates (HCGFRE) obtained by sequencing plain woven glass fiber reinforced epoxy (GFRE) and plain woven carbon fiber reinforced laminates (CFRE) as adherends. Araldite AV138M and Araldite 2015 epoxy adhesives were also used to create the hybrid bondline. Mode I and mode II fracture behaviors were determined by numerical modeling of the Double Cantilever Beam (DCB) and End Notched Flexural (ENF) tests, respectively. In the numerical model, firstly, the fracture parameters of the relevant adhesives were found in the literature, and verification was made utilizing the numerical model. Then, the fracture behavior in both two modes was examined by forming a hybrid bondline. In the literature, there are restricted studies examining the fracture behavior of fracture characterization bonded joints with hybrid bondlines. Additionally, it is not encountered any study determining the both mode I and mode II fracture behavior of composite fracture characterization bonded joints with hybrid bondlines. Therefore, it is thought that this study will gain significant novelties to the existing literature.