Sürdürülebilir Kalkınma Amaçları

• 1

• MakaleAçık Erişim2024Scopus SJRQ2/r/bayburt/11597
  Investigating the Effect of Polypropylene Fiber on Mechanical Features of a Geopolymer-Stabilized Silty Soil

  Kamiloğlu, Hakan A.; Kurucu, Kutluhan; Akbaş, Dilek

  This study investigates the stabilization of silty soil using alkali-activated fly ash and fibers with lengths of 3 mm and 12 mm. The study examines the effects of hybrid fiber length, fiber content, fly ash content, and activator content on the mechanical properties of the geopolymerstabilized samples. The objectives of this paper are 1) to examine the effect of activator content and fly ash content on the UCS, Al/Si ratio, and SiO2/Na2O ratio of the stabilized samples using a statistical approach, 2) to investigate the effect of hybrid fiber length on UCS, secant modulus, flexural strength, toughness, and flexural load-deformation characteristics of the stabilized soil. A statistical approach was employed to investigate the relationship between fly ash content, alkali activator content, and UCS value. Optimal fly ash content and alkali activator content were determined based on the statistical model. The geopolymer structure of the stabilized soil was characterized via SEM, EDS, XRD, and FTIR analyses. The effects of fly ash and alkali activator content on UCS, Al/Si ratio, and SiO2/Na2O ratio were determined using the derived statistical model. The study demonstrated that activator content, a critical factor in compaction, significantly influences the UCS value, as much as the effect of the Si/Al and SiO2/Na2O ratios. Additionally, variations in fly ash content led to an increase in the UCS value of up to 15%. Moreover, changing the activator content resulted in a maximum 12-fold increase in UCS value. Incorporating hybrid fibers for stabilization led to higher secant modulus (up to 30%), flexural strength (up to 6%), and ductility without compromising UCS.

  • 
  AtıfScopus20·WoS17·OpenAlex18

  İncele
• MakaleAçık Erişim2023Scopus SJRQ2/r/bayburt/12900
  The Toughness of Polypropylene Fiber-Reinforced Foam Concrete under Various Uni- and Tri-Axial Compression Loads

  Gökçe, H.S.; Öksüzer, N.; Kamiloğlu, H.A.; Eyüboğlu, M.; Yılmaz, F.

  Foam concrete has recently become a key construction material in terms of meeting the special needs of modern engineering applications such as thermal insulation, absorption of static and dynamic loads. In this study, the effect of polypropylene fiber content and various uni- and tri-axial compression loads on the toughness response of polypropylene fiber-reinforced foam concrete was investigated. Up to a certain strain level (0.1 mm/mm), the ultimate compression stress of specimens under uni- and tri-axial loading increased from about 1 MPa to 16 MPa with the increased target densities of foam concrete. There was a strain-hardening capability of low-density foam concrete while the specimens failed by strain-softening in the high-density series. The optimum fiber amounts were found to be 3.9%, 4.6%, and 6.4% for low, medium, and high target densities of foam concrete, respectively. At low-density series, the bubbles were observed to be relatively bigger and mostly merged with each other. A reduction in foam content (vice versa, increasing target density of mixture) and the presence of fiber resulted in smaller pore size and a more homogenous distribution of them in the matrix. In conclusion, the desired pore structure and efficient bridging of fibers in the matrix allowed the production of favorable foam concrete with higher toughness.

  AtıfScopus14·WoS10·OpenAlex14

  İncele