Bayburt ÜniversitesiBayburt ÜniversitesiAçık Erişim Arşivi · RDL Open

Melt Cleanliness Comparison of Chlorine Fluxing and Ar Degassing of Secondary Al-4Cu

MakaleYalnız künyeScopus SJRQ1

Özet

The treatment of liquid aluminum prior to casting typically consists of purging gas and/or fluxes through the melt. By the use of several chemicals during these operations, several environmental problems can occur. Therefore, in this study, the melt cleanliness of Al-4Cu secondary alloy was investigated by comparing the use of argon degassing with or without chlorine fluxing. Reduced pressure test was used to assess the melt quality. Highest quality melt was obtained by Ar degassing with preheated graphite lance without the need to use any chemicals.

RDL Kalıcı Bağlantı (PID)
https://rdlopen.rawdatalibrary.net/r/bayburt/12289Resmi atıflarda kullanılan kalıcı adres
DOI
https://doi.org/10.1007/s11663-016-0745-3Yayıncı resmi DOI adresi
İndeks kayıtları
ScopusScopusWeb of ScienceWeb of Science
Kaydın indeks veri tabanlarındaki sayfası (aktarımda alınan kayıt numarasıyla). Erişim, indeksin kendi koşullarına bağlıdır.
Atıflar
Scopus
14
WoS
11
OpenAlex
13
Her kaynağın kendi saydığı toplam atıf; aktarım ve zenginleştirme sırasında alındı.
Tam Kayıt
AlanDeğerDil
dc.contributor.authorÇolak, Murat
dc.contributor.authorKayikci, Ramazan
dc.contributor.authorDispinar, Derya
dc.date.accessioned2026-10-29T19:09:24.377149987Z
dc.date.available2026-10-29T19:09:24.377149987Z
dc.date.issued2016
dc.description.abstractThe treatment of liquid aluminum prior to casting typically consists of purging gas and/or fluxes through the melt. By the use of several chemicals during these operations, several environmental problems can occur. Therefore, in this study, the melt cleanliness of Al-4Cu secondary alloy was investigated by comparing the use of argon degassing with or without chlorine fluxing. Reduced pressure test was used to assess the melt quality. Highest quality melt was obtained by Ar degassing with preheated graphite lance without the need to use any chemicals.
dc.identifier.doi10.1007/s11663-016-0745-3
dc.identifier.eissn1543-1916
dc.identifier.endpage2709
dc.identifier.issn1073-5615
dc.identifier.issue5
dc.identifier.scopus2-s2.0-84978150698
dc.identifier.startpage2705
dc.identifier.urihttps://rdlopen.rawdatalibrary.net/r/bayburt/12289
dc.identifier.volume47
dc.identifier.wosWOS:000384548800002
dc.language.isoen
dc.publisherSpringer Boston
dc.relation.ispartofMetallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.subject.classificationMaterials Science, Multidisciplinary
dc.subject.classificationMetallurgy & Metallurgical Engineering
dc.subject.classificationMaterials Science
dc.subject.otherChlorine
dc.subject.otherCopper alloys
dc.subject.otherDegassing
dc.subject.otherEnvironmental problems
dc.subject.otherLiquid aluminum
dc.subject.otherMelt quality
dc.subject.otherReduced pressure test
dc.subject.otherSecondary alloys
dc.subject.otherAluminum
dc.titleMelt Cleanliness Comparison of Chlorine Fluxing and Ar Degassing of Secondary Al-4Cu
dc.typeArticle
rdl.citation.openalex13
rdl.citation.scopus14
rdl.citation.wos11
rdl.oa.statusclosed
rdl.scopus.quartileQ1
rdl.source.indexSCOPUS
rdl.source.indexWOS
rdl.wos.indexScience Citation Index Expanded (SCI-EXPANDED)